Гидравлический пресс с С-образной колонной 150 тонн Подробности смотрите на фотографиях.  ...

• больше информации

DERA'S SALE, RUSKI CHN 36/45 ENGINE 6CYL CRANKSAFT, ЛИНЕНЕР, ПИСТОН, КОВЕР, БЛОК, ПУМП ЛЮБОЕ ПАРТС Бргдс Хакан КУСКУ No905323642509 info@kscege  ...

• больше информации

sheet width: 3100 mm plate thickness: 6 mm thickness at Niro-steel: 4,5 mm daylight upper clamping: 100 mm Bending angle: 0 - 135 ° total power requirement: 7,5 kW weight of the machine ca.: 7,6 t dimensions of the machine ca.: 4,5 x 1,72 x 2 m Electric 380 Volt: manuel back gauge adjustable from the front: 70 - 600 mm Foot switch with emergency stop: Segmented upper tool: Oil filling: exklusive Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lippert belt conveyor inclined belt GF 3100-650-500 RA1494 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 3100 mm (upper straight 470mm + inclined belt 2630mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying sp ...

Производитель: Roboter Kuka Quantec-2 KR 120-3100-2/FLR, Тип: Quantec-2 KR 120-3100-2/FLR, Год: 2021, Управление: Kuka Smart Pad/KukaVisual 6.0, Achsanzahl: 6, Боденмонтаж: да, Saugsystem: Vakuum, Год: 2021 ...

• больше информации

Гидравлические гильотинные ножницы ERMAK CNC HVR 3100 x 13, построенные в Турции в 2008 году, предназначены для резки заготовок, изготовленных, среди прочего, из мягкой или нержавеющей стали. Металлический лист с максимальной длиной 3100 мм и максимальной толщиной 8 мм (обычная сталь) или 13 мм (нержавеющая сталь), удерживается во время обработки 14 гидравлическими зажимами. Угол режущего полотн� ...

sheet width: 3100 mm plate thickness: 6,0 mm thickness at Niro-steel: 4,0 mm down holder: 14 Stück no. of strokes: 20 Hub/min oil volume: 150 ltr. cutting angle: 1,2 ° control: CYBELEC CybTouch weight: 5500 kg range L-W-H: 4.000 x 2.100 x 1.640 mm total power requirement: 11,0 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 6,0 mm distance between columns: 3.100 mm down holder: 14 Stück no. of strokes: 16 - 24 Hub/min oil volume: 150 ltr. cutting angle: 0,5 - 1,5 ° thickness at Niro-steel: 4,0 mm column arm: 350 mm engine output: 11,0 kW weight of the machine ca.: 7.060 kg range L-W-H: 4100 x 2200 x 2190 mm -------------------------------------------------- electr. / hydraulic CNC guillotine shears - guided by a backdrop with CYBELEC CNC touch screen control with electr. / hydr. Cutting gap and cutting angle adjustment -------------------------------------------------- Furnishing: - CNC guiding guillotine shears - with electr. / hydr. Cutting gap and cutting angle adju ...

sheet width: 3100 mm plate thickness: 6,0 mm distance between columns: 3100 mm down holder: 14 Stück no. of strokes: 18 Hub/min oil volume: 150 ltr. cutting angle: 1,2 ° thickness at Niro-steel: 4,0 mm control: CYBELEC CybTouch weight: 6,3 To. range L-W-H: 4.000 x 2.100 x 1.640 mm -------------------------------------------------- electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting  ...

sheet width: 3100 mm plate thickness: 6,0 mm distance between columns: 3.100 mm down holder: 14 Stück no. of strokes: 16 - 24 Hub/min oil volume: 150 ltr. cutting angle: 0,5 - 1,5 ° thickness at Niro-steel: 4,0 mm column arm: 350 mm engine output: 11,0 kW weight of the machine ca.: 7.060 kg range L-W-H: 4,1 x 2,2 x 2,19 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.