металлообрабатывающие станки / фрезерные станки / Фрезерные станки с круглым столом
Производитель: DMG MORI
Модель:DMU 65 monoBLOCK
Тип техники: Фрезерные станки с круглым столом
Номер позиции: 166192312
Количество: 1
Дата: 08.01.2025
Местоположение:
Германия
Цена:
Seller-item-No.:011166
| General | |
| Universal Machining Centre in monoBLOCK construction; Control: CELOS X with HEIDENHAIN TNC7 | |
| Technical Data | |
| Feed rate longitudinal/transverse/vertical | 40000/40000/40000 mm/min |
| Rapid traverse longitudinal/transverse/vertical | 40/40/40 m/min |
| Working area 1 | |
| Longitudinal | 735 mm |
| Cross | 650 mm |
| Vertical | 560 mm |
| Tool changer | |
| Tool changer plane | vertical |
| Type of gripper | Double gripper |
| Number of tools | 30 |
| Max. tool length | 315 mm |
| Max. tool diameter with occupied adjacent pockets | 80 mm |
| Max. tool dia. with free neighbouring pockets | 160 mm |
| Floor space/Weight | |
| Weight approx. | 12400 Kg |
| NC swivel rotary table | Table surface Ø650 mm |
| Centre bore 32 mm | |
| Maximum load (table centre) 600 Kg | |
| Slot width 14 mm | |
| Number of Slots 9 | |
| Rotation Speed 5. Axis 20 rpm | |
| 5. Axes (swivelling range) +/- 120 degree | |
| 4. Axes (swivelling range) 360 x 0,001 degree | |
| Rotation speed max.4. Axis 40 rpm | |
| Distance between T-Slots 63 mm | |
| Direct measuring system | Direct path measuring system |
| Cabine | Full protection cabin |
| Motor spindle 20,000 rpm | Motor spindle speedMASTER® Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) |
| Spindle taper HSK-A 63 | Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle and standard magazine) |
| Stop block | Stop block Design according to DECKEL MAHO Standard |
| 3D quickSET extension package | 3D quickSET extension package for each further machine: software / password (only together with option measuring probe and existing set of measuring tools) |
| Infrared measuring probe Renishaw | Infrared measuring probe Type Renishaw OMP 60 SK 40 or optionally chosen spindle taper |
| Tool measuring in machining area Blum Laser | Tool measuring in machining area Blum Laser DIGILOG Tool length and diameter measurement vertically |
| Production package 40 bar/23 l/min, 600 l tank | Production package: Scraper flight conveyor with coolant unit 600 l / 160 gallon, paper band filter Discharge height: 950 mm / 37.4 in Width: 670 mm / 26.4 in Internal coolant supply 40 bar/23 l/min / 580 psi/6 gallon/min through spindle centre (AD) Exter |
| Rotating clear-view window | Rotating clear-view window cabin door |
| Coolant ring jet | Coolant ring jet for vertical headstock, 16 water jets, 7 air jets |
| Coolant tempering | Coolant tempering for internal coolant unit 600 lt / 160 gallon: Increased tank 980 lt / 259 gallon Heating capacity max.: 3,000 W / 4 hp Cooling capacity max.: 3,800 W / 5.1 hp |
| VCS Complete extension package | VCS Complete extension package for each further machine: software / password (only in conjunction with option measuring probe or existing set of measuring tools) |
| Sensorpaket i4.0 | Sensor package i4.0: MPC Machine Protection Control SGS Spindle Growth Sensor ICS flow sensor |
| Maintenance Package I4.0 | Maintenance Package I4.0: - measurement of D5152871 tool pull-in force - autom. lubrication of tool clamp - monitoring of pneumatics |
| Cooling | Cooling by air blast through spindle centre, selection with M function |
| Interface for Oil and emulsion mist separator | Interface mechanical and elektrical for oil- and emulsion mist separator |
| Tropical package (ambient temp. max. 50 °C) | Package for tropical climate for ambient temperature of max. 50° Celsius at machine location |
| Control cabinet lighting with power outlet | Control cabinet lighting with power outlet Lighting in the control cabinet with motion sensor power outlet 230V - 10A (Type F - Schuko) Other types of outlet on request Connected before the main switch (for this the customer must provide a loadable neutra |
| Operation mode 4 | Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area Release after completed check list |
| Active Chatter Control ACC | Active Chatter Control ACC Improved surface quality combined with reduced machining time, increased tool lifetime |
| Safety package for power failure | Safety package for power failure: Voltage control with fast deceleration trigger Controlled shut down of the control Display of last executed program number |
| Digital Manufacturing Package | Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b |
| Messenger V4 | The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop |
| Service Agent | Service Agent Overview of all maintenance work on the machine |
| Special equipment | rotoLENS - Camera with rotating lens integrated in the milling head. Display via CELOS and HDMI 4K resolution (3,840 x 2,160 pixels) Digital zoom and recording function Full protection cabin in safety design included Laminated glass safety screen Condit |
| DMG MORI | DMU 75 monoBLOCK | ||
| DMG MORI | DMU 65 monoBLOCK | ||
| DMG MORI | DMU 65 monoBLOCK | ||
| DMG MORI | DMU 65 monoBLOCK | ||
| DMG MORI | DMU 65 monoBLOCK | ||
| DMG MORI | DMU 75 monoBLOCK | ||
| DMG MORI | DMU 85 H monoBLOCK | ||
| DMG MORI | DMU 65 H monoBLOCK | ||
| DMG MORI | DMU 65 H monoBLOCK | ||
| 2019 | DMG MORI | DMU 95 monoBLOCK |
| 2010 | DMG MORI | DMU 40 MONOBLOCK | 115000 EUR | [Nov 2019] |
| 2015 | DMG MORI | DMU 50 | 125000 EUR | [Jan 2019] |
