металлообрабатывающие станки / фрезерные станки / Горизонтальные консольно-фрезерные станки
Производитель: DMG MORI
Модель:DMU 65 H monoBLOCK
Тип техники: Горизонтальные консольно-фрезерные станки
Номер позиции: 166192452
Количество: 1
Дата: 09.01.2025
Местоположение:
Германия
Цена:
Seller-item-No.:064049
| General | |
| Horizontal universal machining center Machine was damaged during loading and has therefore been given a completely new cab and switch cabinet. ; Control: CELOS with Heidenhain TNC 640 | |
| Working area 1 | |
| Longitudinal | 650 mm |
| Cross | 700 mm |
| Vertical | 950 mm |
| Technical Data | |
| Feed rate longitudinal/transverse/vertical | 60000/60000/60000 mm/min |
| Rapid traverse longitudinal/transverse/vertical | 60/60/60 m/min |
| NC swivel rotary table | Type of Measuring system Direct measuring system |
| Table surface Ø 650 mm | |
| Cabine | Full protection cabin |
| Rotation Speed 5. Axis 20 rpm | |
| 5. Axes (swivelling range) +120/-120 x 0,001 degree | |
| 4. Axes (swivelling range) 360 x 0,001 degree | |
| Rotation speed max.4. Axis 40 rpm | |
| Distance between T-Slots 63 mm | |
| Number of Slots 9 | |
| Slot width 14 mm | |
| Maximum load (table centre) 600 Kg | |
| Centre bore 50 H6 mm | |
| Motor spindle 20,000 rpm | Motor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) |
| Kinematics axis A / C for swivel rotary table | Axis kinematics A/C for swivel rotary table Axis designation swivel axis: A Axis designation rotary axis: C 0° position A axis: table vertical Rotary axis setting: modulo Machine datum: In table center on the table top Not compatible with monoBLOCK kinem |
| Tool magazine, chain, 60 pockets | Tool magazine chain magazine with 60 tool pockets HSK-A63 or optionally chosen spindle taper |
| Operation panel for loading station tool magazine | Control panel for loading station tool magazine with TFT screen 15” Input on touch screen Windows 10 IoT Enterprise LTSB - 64 bit |
| Production package 40 bar/23 l/min, 600 l tank | Internal coolant supply: coolant unit 600 l / 160 gallon, paper band filter Internal coolant supply, 40 bar/23 l/min / 580 psi/6 gallon/min through spindle centre (AD) External coolant supply 4 bar / 58 psi - 40 l/min / 10.4 gpm (theoretical pump perform |
| Rotating clear-view window | Rotating clear-view window cabin door |
| Split-able chip conveyor | Separable chip conveyor Less space required behind the machine for pulling out the chip conveyor in case of maintenance |
| Cooling | Cooling by air blast through spindle centre, selection with M function |
| Interface for Oil and emulsion mist separator | Interface mechanical and elektrical for oil- and emulsion mist separator |
| Infrared measuring probe Renishaw HSK-A 63 | Infrared measuring probe Type Renishaw OMP 60 HSK-A 63 |
| Tool measuring in machining area Blum Laser | Tool measuring in machining area Blum Laser DIGILOG Tool length and diameter measurement vertically |
| 3D quickSET | 3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis D5152871 machine configurations (only together with option measuring probe) |
| VCS Complete | VCS Complete Toolkit for analyzing and automatic volumetric compensation of all linear and rotary axes. (only in conjunction with option measuring probe) |
| Sensorpaket i4.0 | Sensor package i4.0: MPC Machine Protection Control SGS Spindle Growth Sensor ICS flow sensor |
| Tropical package (ambient temp. max. 50 °C) | Package for tropical climate for ambient temperature of max. 50° Celsius at machine location |
| Safety package for power failure | Safety package for power failure: Voltage control with fast deceleration trigger Controlled shut down of the control Display of last executed program number |
| Interpolation turning | Interpolation turning Turning-recessing cycle Manufacture of simple sealing surfaces and grooves using Machining Centres. For Siemens control only in horizontal and vertical plane |
| Application Tuning Cycle ATC | Application Tuning Cycle ATC programmable feed parameter selection for machining task: accuracy/surface/speed |
| Active Chatter Control ACC | Active Chatter Control ACC Improved surface quality combined with reduced machining time, increased tool lifetime |
| Digital Manufacturing Package | Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b |
| Messenger V4 | The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop |
| Service Agent | Service Agent Overview of all maintenance work on the machine |
| 2020 | DMG MORI | DMU 65 monoBLOCK 5-Axis | 82400 EUR |
| 2015 | DMG MORI | DMU 75 monoBLOCK | |
| DMG MORI | DMU 75 monoBLOCK | ||
| DMG MORI | DMU 65 monoBLOCK | ||
| DMG MORI | DMU 65 monoBLOCK | ||
| DMG MORI | DMU 65 monoBLOCK | ||
| DMG MORI | DMU 65 monoBLOCK | ||
| DMG MORI | DMU 75 monoBLOCK | ||
| DMG MORI | DMU 65 monoBLOCK | ||
| DMG MORI | DMU 85 H monoBLOCK |
| 2010 | DMG MORI | DMU 40 MONOBLOCK | 115000 EUR | [Nov 2019] |
| 2015 | DMG MORI | DMU 50 | 125000 EUR | [Jan 2019] |
