металлообрабатывающие станки / фрезерные станки / Фрезерные станки с круглым столом
Производитель: DMG MORI
Модель:DMU 50
Тип техники: Фрезерные станки с круглым столом
Номер позиции: 166192313
Количество: 1
Дата: 08.01.2025
Местоположение:
Германия
Цена:
Seller-item-No.:011169
| General | |
| Universal Milling Machine; Control: CELOS with Siemens 840D sl Operate | |
| Working area 1 | |
| Longitudinal | 650 mm |
| Cross | 520 mm |
| Vertical | 475 mm |
| Technical Data | |
| Type of main drive | AC |
| Drive power (100% DC) | 25 kW |
| Drive power (40% DC) | 35 kW |
| Speed range | 20 - 20000 rpm |
| Spindle taper | HSK-A 63 |
| Feed rate longitudinal/transverse/vertical | -42000/-42000/-42000 mm/min |
| Clamping System | HSK-A 63 |
| Rapid traverse longitudinal/transverse/vertical | 42/42/42 m/min |
| Floor space/Weight | |
| Dimensions (L x W x H) | 2,85 x 2,35 x 2,75 m |
| Weight approx. | 7500 Kg |
| Direct measuring system | Direct path measuring system |
| Spindle speed 20.000 rpm | Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) |
| NC swivel rotary table | Swivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformation |
| Clamping hydraulic two circuits, manual | Clamping hydraulics, 2 clamping circuits 30-240 bar manual adjustable for standard machine Safety regulations according to EN 13857 must be observed, |
| Tool magazine 60 pockets | Tool magazine 60 places HSK-A63 Vertical chain with double gripper incl. set up station for tool loading |
| Swarf conveyor, with cleaned slot screen | Swarf conveyor, scraper type with cleaned slot screen |
| Internal coolant supply 40bar/600l | Internal coolant supply (ICS) with paper type filter, 40 bar/23 l/min / 600-l tank 580 psi/6 gallon/min /160 gallon incl. cabin roof, rotary joint in spindle, double cartridge filter 50µm for internal coolant (differently from standard) |
| Coolant-air blast change-over | Coolant - Air-blast changeover external switchable via M-Function |
| Air blast through spindle centre | Air blast through spindle centre activated by M function, maintained air with low oil rate |
| Chip flushing for working area | Chip flushing for working area rinsing line on the right side panel, backside of machine bed, cabin left and right activated or deactivate by M function´s (only in combination with internal coolant supply, not with 20 bar ICS) |
| Double cartridge filter, 25 µm | Double cartridge filter, Finesse of filtration 25 µm, manually reversible (only in connection with separate paper-type filter) |
| Rotating clear-view window | Rotating clear-view window (only available with option cabin roof) |
| Oil- and emulsion mist separator mechanical | Oil- and emulsion mist separator mechanical (only available with option cabin roof) |
| Infrared measuring probe PP60 optical | Infrared touch Probe make Renishaw PP 60 optical (OMP 60) |
| Laser tool measuring BLUM DIGILOG | Laser tool measuring Blum DIGILOG fix mounted at machine column modified construction, note interference contour! Tool lenght and diameter measuring automatically cleaning through external airblast Calibration tool with taper |
| 3D Quick SET | 3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe) |
| MPC - Machine Protection Control | MPC - Machine Protection Control Machine protection by quick shutdown |
| Signal lamp 4-colour | Signal lamp, 4 colours |
| Automation Interface WH CELL / Robo2Go | Automation interface WH CELL / WH FLEX / Robo2Go Interface (Profibus) via M65 Automatic loading door Working table with 4-channel rotary joint Only in combination with an additional clamping method option! For Robo2Go this option is only available for D5152871 CEL |
| Active chiller for speedMASTER® spindle | Active chiller speedMASTER® for raised cooling efficiency of main spindle drive / motor spindle |
| Exhibition design DMU50 3rd generation | Exhibition design DMU 50 3rd chiller of electrical cabinet painted in electrical cabinet color; lighting of tool magazine; DMG-MORI set of labels; paper version of electrical plan |
| One free M-function | One free M-function M20 potential-free on contact inside electrical cabinet |
| DXF Reader | DXF-Raeder: Open CAD files Extracting of counters and drilling positions directly in G-code and ShopMill programs Supported elements: drilling positions and contours |
| Safety package for power failure (incl. IPC) | Safety package for power failure: Package for power failure IPC CELOS (for proper shutdown of IPC); Overload limiter, Undervoltage monitoring with fast deceleration control |
| Operation mode 4 | Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in. |
| ATC (Application Tuning Cycle) | ATC (Application Tuning Cycle) programmable feed parameter selection for machining task: accuracy/surface/speed |
| 3D data model | 3D data model in STEP format for integration in CAD System by the customer. It is used for machine simulation. (shipping against signed non disclosure agreement) |
| WIFI module for the IoTconnector (EU) | WIFI module for the IoTconnector (EU) Wireless connection of the IoTconnector and machine into the company network |
| Digital Manufacturing Package | Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b |
| Messenger V4 | The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop |
| Service Agent | Service Agent Overview of all maintenance work on the machine |
| 2021 | DMG MORI | Coolant for DMU 125P | 14000 EUR |
| DMG MORI | DMU 50 | ||
| 2021 | DMG MORI | DMU 50 | |
| DMG MORI | DMU 40 | ||
| 2019 | DMG MORI | DMU 60 eVo + PH150 | |
| DMG MORI | DMU 40 | ||
| 2019 | DMG MORI | DMU 95 monoBLOCK | |
| DMG MORI | DMU 40 eVo | ||
| 2014 | DMG MORI | DMU 50 Ecoline | 49170 EUR |
| DMG MORI | DMU 60 eVo (linear) |
| 2015 | DMG MORI | DMU 50 | 125000 EUR | [Jan 2019] |
| 2010 | DMG MORI | DMU 40 MONOBLOCK | 115000 EUR | [Nov 2019] |
