металлообрабатывающие станки / фрезерные станки / Фрезерные станки с круглым столом
Производитель: DMG MORI
Модель:DMC 65 monoBLOCK
Тип техники: Фрезерные станки с круглым столом
Номер позиции: 166192320
Количество: 1
Дата: 08.01.2025
Местоположение:
Германия
Цена:
Seller-item-No.:020306
| Technical Data | |
| Feed rate longitudinal/transverse/vertical | 40000/40000/40000 mm/min |
| Rapid traverse longitudinal/transverse/vertical | 40/40/40 m/min |
| Working area 1 | |
| Longitudinal | 735 mm |
| Cross | 650 mm |
| Vertical | 560 mm |
| General | |
| Universal Machining Centre Vertical headstock Tool change system double gripper NC-Swivel rotary table with pallet carrier 3 pallets 500 mm x 500 mm / 19.7 in x 19.7 in T-slots according to DIN 55201-A2 linear pallet changer coolant tank 500 l / 132 gallon chip conveyor with netting band filter integrated, coolant ring jet; Control: CELOS with Siemens 840D sl Operate | |
| Floor space/Weight | |
| Weight approx. | 18300 Kg |
| Direct measuring system | Direct path measuring system |
| Cabine | Full protection cabin |
| NC swivel rotary table with pallet carrier | Table surface 500 x 500 mm |
| Centre bore 50 mm | |
| Motor spindle 20,000 rpm | Motor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) |
| 5. Axes (swivelling range) +/- 120 x 0,001 degree | |
| 4. Axes (swivelling range) 360 x 0,001 degree | |
| Distance between T-Slots 100 mm | |
| Number of Slots 5 | |
| Slot width 14 mm | |
| Maximum load (table centre) 500 Kg | |
| Tool magazine, chain vert., 180 pockets | Tool magazine Vertical chain magazine with 180 tool pockets |
| Spindle taper HSK-A 63 | Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle and standard magazine) |
| 3D quickSET | 3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only together with option measuring probe) |
| Infrared measuring probe Renishaw | Infrared measuring probe Type Renishaw OMP 60 |
| Tool measuring in machining area Blum Laser | Tool measuring in machining area Blum Laser DIGILOG Tool length and diameter measurement vertically |
| Production package 40 bar/23 l/min, 600 l tank | Production package: Scraper flight conveyor with coolant unit 600 l / 160 gallon, paper band filter Discharge height: 950 mm / 37.4 in Width: 670 mm / 26.4 in Internal coolant supply 40 bar / 23 l/min - 580 psi / 6 gpm through spindle centre (AD) External |
| Rotating clear-view window | Rotating clear-view window cabin door |
| Sensorpaket i4.0 | Sensor package i4.0: MPC Machine Protection Control SGS Spindle Growth Sensor ICS flow sensor |
| proTIME | proTIME Visualisation of the remaining runtime, remaining workpieces and the machine state |
| Tool identification (TDS) | Tool identification (Tool Dialogue System TDS) Type Balluff, data carrier BIS C-122-04/L Reading writing station at the tool magazine Reading/Writing manually, contactless with chip |
| Maintenance Package I4.0 | Maintenance Package I4.0: - measurement of tool pull-in force - autom. lubrication of tool clamp - monitoring of pneumatics |
| Spray pistol with pump | Spray pistol with pump 2 bar/40 l/min 29 psi/10.4 gallon/min (theoretical pump performance) |
| Cooling | Cooling by air blast through spindle centre, selection with M function |
| Operation mode 4 | Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area Release after completed check list |
| MDynamics package | Deckel Maho package MDynamics Improved surface quality combined with reduced machining time |
| Application Tuning Cycle ATC | Application Tuning Cycle ATC programmable feed parameter selection for machining task: accuracy/surface/speed |
| DMG MORI NETSERVICE | DMG MORI NETSERVICE Qualified support by Internet-based remote diagnostics |
| IoT connector | DMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS) |
| SERVICE AGENT (CELOS) | SERVICE AGENT (CELOS) Overview of all maintenance work on the machine |
| MESSENGER (CELOS) | MESENGER (CELOS) Clear live status of the networked machines |
| Special equipment | - Painting of the enclosure cooling units in machine colour - Tempered glass pane including cabin in FD design - Rotating viewing window for work area, 1 pc Bonded version for tempered glass panes - Narrow swivelling bridge with integrated Capto C8 |
| Special equipment | Wheel magazine for changing smaller workpieces workpieces by means of shuttle unit and double gripper workpiece changer into the work area. - Double wheel with 25 workpiece holders each (quiver) - Shuttle unit - Double gripper for workpiece handling - C |
| DMG MORI | DMC 65 monoBLOCK | ||
| DMG MORI | DMC 85 H monoBLOCK | ||
| DMG MORI | DMC 65 H MONOBLOCK | ||
| 2010 | DMG MORI | DMU 60 monoBLOCK | |
| 2020 | DMG MORI | DMU 65 monoBLOCK 5-Axis | 82400 EUR |
| 2015 | DMG MORI | DMU 75 monoBLOCK | |
| DMG MORI | DMU 75 monoBLOCK | ||
| DMG MORI | DMU 65 monoBLOCK | ||
| DMG MORI | DMU 65 monoBLOCK | ||
| DMG MORI | DMU 65 monoBLOCK |
| 2010 | DMG MORI | DMU 40 MONOBLOCK | 115000 EUR | [Nov 2019] |
| 2011 | DMG MORI | DMC 635 V Ecolin | 36000 EUR | [Nov 2022] |
| 2011 | DMG MORI | DMC 635 | 30000 EUR | [May 2021] |
| 2013 | DMG MORI | DMC 1035 V ecoline | 26500 EUR | [Nov 2022] |
| 2011 | DMG MORI | DMC 635 Ecoline | 27000 EUR | [Oct 2021] |
| 2017 | DMG MORI | DMC 1150 V | 113640 EUR | [Sep 2022] |
| 2017 | DMG MORI | DMC 1150 | 165000 EUR | [Oct 2019] |
