| Cabine |
Full protection cabin |
| Taper cleaning brushes |
Taper cleaning unit with rotating brushes for
spindle taper HSK |
| Package Mill / Turn HSK-A 100 |
Package Milling / Turning: Upgrade NC-swivel
rotary table to Milling - Turning / direct drive Pallet C-axis d 630
mm / 24.8 in Speed C-axis max. 1.200 min-1 Integrated balancing sensor
Motor spindle powerMASTER® 12.000 rpm 44 kW / 59 hp (40% d.c.), 32
kW |
| Kinematics axis A / C for swivel rotary
table |
Axis kinematics A/C for swivel rotary table Axis
designation swivel axis: A Axis designation rotary axis: C 0°
position A axis: table vertical Rotary axis setting: modulo Machine
datum: In table center on the table top Not compatible with monoBLOCK
kinem |
| Tool magazine, wheel, 123 pockets
HSK-A63 |
Tool magazine wheel magazine (2 wheels) with 123
tool pockets HSK-A63 or optionally chosen spindle taper |
| Operation panel for loading station tool
magazine |
Control panel for loading station tool magazine
with TFT screen 15” Input on touch screen Windows 10 IoT Enterprise
LTSB - 64 bit |
| ICS unit frequency controlled 80 bar 980
l tank |
Internal coolant supply unit: 980 l / 259 gallon,
paper band filter Internal coolant supply, frequency controlled 10
bar/37l/min - 80 bar/31 l/min - 145 psi/9.7 gpm - 1,160 psi/8.2 gpm
through spindle centre (AD) External coolant supply 4 bar / 58 psi -
4 |
| Oil and emulsion mist separator |
Oil and emulsion mist separator Mechanical filter
Throughput volume 1,100 m³/h |
| Cooling |
Cooling by air blast through spindle centre,
selection with M function |
| Infrared measuring probe Renishaw HSK-A
100 |
Infrared measuring probe Type Renishaw PP60
optical (OMP 60) HSK-A 100 |
| Tool measuring in machining area Blum
Laser FD |
Tool measuring in machining area Blum Laser
DIGILOG Laser-system for milling tools, 3D touch-probe for turning
tools |
| 3D quickSET extension package |
3D quickSET extension package for each further
machine: software / password (only together with option measuring
probe and existing set of measuring tools) |
| VCS Complete extension package |
VCS Complete extension package for each further
machine: software / password (only in conjunction with option
measuring probe or existing set of measuring tools) |
| Sensorpaket i4.0 |
Sensor package i4.0: MPC Machine Protection
Control SGS Spindle Growth Sensor ICS flow sensor |
| Maintenance Package I4.0 |
Maintenance Package I4.0: - measurement of tool
pull-in force - autom. lubrication of tool clamp - monitoring of
pneumatics |
| Condition Analyzer |
Condition Analyzer Acquisition, visualization and
analysis of machine and process data at the machine incl. Performance
Monitor |
| rotoLENS - working envelope camera |
rotoLENS - Camera with rotating lens integrated in
the machine roof Visualization via CELOS (delayed) and HDMI (real
time) Digital zoom and recording function |
| MPC - Machine Protection Control |
MPC - Machine Protection Control Machine
protection by quick shutdown |
| Operation mode 4 |
Operation mode 4 Process monitoring in the
production Manual intervention with open doors of machining area
Release after completed check list |
| Package increased accuracy |
Package increased accuracy Advanced cooling
measures, Thermoshield Coolant tempering control Component selection
VSC complete |
| Rough D4952871 cutting package |
Rough cutting package Hydraulic Z-axis
clamping |
| ATC (Application Tuning Cycle) |
ATC (Application Tuning Cycle) programmable feed
parameter selection for machining task: accuracy/ surface/ speed |
| MDynamics package |
Deckel Maho package MDynamics Improved surface
quality combined with reduced machining time |
| Alternating rotation speed |
Alternating rotation speed Process stabilisation
to prevent vibrations for turning operations |
| Efficient Production Package |
Efficient Production Package Solutions for a safe
prozess and for the efficient use of important machining steps |
| Interpolation turning |
Interpolation turning Turning-recessing cycle
Manufacture of simple sealing surfaces and grooves using Machining
Centres. For Siemens control only in horizontal and vertical
plane |
| Tilted measuring cycle |
Tilted measuring cycles. Measuring cycle package
for tilted measuring of components to determine the center of the
workpiece and for alignment of the rotation center to the
coordinates-origin via a straight line or hole. Only in connection
with Siemens. |
| Digital Manufacturing Package |
Digital Manufacturing Package (1) IoTconnector
Allows the use of the Online services from DMG MORI (2) Machine Data
Connector (MDC) Standardized machine data interface Protocols: OPCUA,
MTConnect, MQTT (3) NETservice Qualified support through
internet-b |
| Messenger V4 |
The latest version of DMG MORI Messenger displays
web based the machine live status. It allows to analyze the machine
run-time, downtime, alarms in individually configurable dashboards
and transparently shows the actual status in the manufacturing
shop |
| Service Agent |
Service Agent Overview of all maintenance work on
the machine |
| Special equipment |
- Exhibition Design - Viewing window in partition
wall Pallet changer - Tool input station Siemens not Omron - L- Probe
package 1 (Renishaw infrared) with calibration device - Technology
cycle gearSKIVING - ESR (Extended Shutdown and Retraction) -
Infrare |