| Design version BLACK |
Design version BLACK Working area door,
front cover beneath Working area door and front pane frame in colour
deep black |
| Excentric turning and milling
operation |
Excentric turning and milling operation (only with
Siemens control) |
| 5-axis simultaneus machining |
5-axis simultaneous machining |
| Interpolation turning |
Turning-recessing cycle Manufacture of simple
sealing Surfaces and grooves using turn/mill centers |
| Technologie cycle alternating speed |
Technology cycle for the application of an
alternating speed for vibration sensitive set-ups (Only in conjunction
with Siemens control) |
| Program state control |
With the program state control of the part state
is retained on the control and / or influenced. Particularly suitable
for multi-channel machines. |
| Easy Tool Monitor f.cnc Siemens |
Tool breakage monitoring for one single working
phase, setting of one monitoring limit for each tool selected from the
tool list. Easy teaching function to measure monitoring limit, with
manual modification / correction of the fixed values. |
| Main spindle ISM 102 |
Main spindle as integrated spindle motor ISM 102
-drive power 28/37 KW (37.5/49.5 hp) (100/40% d.c.) -torgue 600/700
Nm (442.56/567.95 lbxft) (100/40% d.c.) -speed range 20-4000 rpm
-partially hollow clamping device (hydr.) inner dia of draw tube 104
m |
| Hollow clamping attachment, Ø 104
mm |
Hydraulic hollow clamping attachment dia. 104 mm
(4.09 inch) Pullforce 94 kN (21.132,04 lbf) at pmax 40 bar (580,151
psi) n max. = 3600 min-¹ |
| Drill fractre monitoring via swing wire
1,4 -32 mm |
Drill fracture monitoring via swing wire,
measuring range 1,4 mm-32 mm (0.05 inch - 1.25 inch) |
| Chuck rinsing device, mainspindle |
Chuck rinsing device for main spindle,
outside |
| Chuck rinsing device, subspindle |
Chuck rinsing device for subspindle, outside |
| Clamping with balanced pressure, main
sp. |
Balanced pressure clamping device for the main
spindle |
| Clamping with balanced pressure,
sub-sp. |
Balanced pressure clamping device for
sub-spindle |
| Tailstock function for counter
spindle |
Tailstock function for the counter spindle,
mechatronic control of the supporting force, selectable per program
Thrust force 250-600 daN, CTX beta / CTX beta TC. Thrust force
250-1200 daN, CTX gamma TC |
| Steady rest carrier for steady rest
30-245 mm |
Steady rest carrier for NC-slide for 1 steady rest
range 30-245 mm (1.18-9.4 inch) |
| Steady rest carrier for steady rest
85-350 mm |
Steady rest carrier for NC-slide for 1 steady rest
range 85-350 mm (3.35-13.78 inch) |
| Steady rest slide NC controlled, CTX beta
2000 TC |
NC-Slide Z for steady rest carrier max. clamping
range 350 mm (13.77 inch) including power supply for 1 steady
rest |
| Steady rest SLU-X4, clamping range 30-245
mm |
Self centering SLU-X4, hydraulic Steady rest,
clamping range 30-245 mm (1.18-9.64 inch) (Remark: additional steady
rest slide and steady rest carrier required) |
| Steady rest SLU-X5.1, clamping range
85-350 mm |
Steady rest SLU-X5.1, self centering, hydraulical
actuated, clamping range 85-350 mm (3.35-13.78 inch) (Remark:
additional steady rest slide and steady rest carrier required) |
| Quick change system for steady rest |
Quick change system for steady rest, 2-fold cone
centering between steady rest slide and steady rest carrier |
| Counter spindle ISM 102 |
Counter spindle as integrated spindle motor ISM
102 -drive power 28/37 (37.5/49.5hp) -partial hollow clamping
(hydraulic) -draw tube ID 104 mm (4.09 inch) -C axis and spindle brake
(hydraulic) -basic slide (Z3), AC servo drive with ball screw,
absolute |
| Double cartridge filter on chip
conveyor |
Double cartrige filter on chip conveyor |
| Cooling 8/20/80 bar, 980 l, vlies,
chiller |
Compact coolant system, consisting of: - coolant
tank, 980 litre/259.9 gal. - 8 bar/20 litre/min 20 bar/40 litre/min
and 80 bar/11 litre/min (116 psi/5.2 gal/min and 290 psi/ 10.5
gal/min and 1160 psi/2.9 gal/min for turning/milling spindle
pr |
| Hinged typ chip conveyor |
Hinged typ chip conveyor incl. coolant tank and
coolant pump, 6 bar (87 psi)/20 litre/min |
| Mechanical oil mist extractor
1100m³/h |
Mechanical oil mist extractor, 1100 m³/h (38,830
ft³/h) with dirtiness indicator, class of filtration H13 |
| Chain magazine for 100 tools HSK-A
63 |
Tool magazine, 100-fold chain magazine with double
gripper with cam drive instead of tool disc magazine, tool reception
HSK-63A DIN 69893. Tool dia./tool length max. 140/400 mm (5.51/15.74
in) Tool weight max. 12 kg (26.46 lb), only with Siemens control. |
|
|
| Workpiece touch probe, BLUM, tool
reception HSK63A |
Workpiece touch probe, make BLUM with cycle
package Quickstart consisting of: Touch probe TC60 incl. sending and
receiving unit, tool reception HSK 63A 1 probe tip, measuring
cycles |
| Electrical Interface standard
Profibus |
Electrical Interface D41152871 standard Profibus
for 6-axes robot Attention: Special operating mode 3 / operating mode
grinding is not feasible in connection with the electrical
interface. |
| 3-jaw chuck 3QLC 400-126(through hole
110)Forkardt |
3-jaw power clamping chuck with through-hole, type
3QLC 400-126 (through hole Ø 110 mm (4.33 in)), make Forkardt, incl.
connecting elements Attention: Assembly-related the use of the
mounting ring causes a reduction of the through hole to Ø 110 mm
(4.33 |
| 3-jaw chuck, DURO-NC 26072, make
Röhm |
3-jaw power clamping chuck with through-hole and
jaw quick-change system type DURO-NC 260-72, make Röhm, incl.
connecting elements |
| 3-jaw chuck 3QLC 400-126(through hole
110)Forkardt |
3-jaw power clamping chuck with through-hole, type
3QLC 400-126 (through hole Ø 110 mm (4.33 in)), make Forkardt, incl.
connecting elements Attention: Assembly-related the use of the
mounting ring causes a reduction of the through hole to Ø 110 mm
(4.33 |
| 3-jaw chuck, DURO-NC 175-43, make
Röhm |
3-jaw power clamping chuck with through-hole and
jaw quick-change system type DURO-NC 175-43, make Röhm, incl.
connecting elements |
| Window rising of the security
windows |
Window cleaning of the security windows of both
working area doors by compressed air (Remark: The employment of
coolant can limited the view on the workpiece at machining) |
| Quick change clamping head, serrated,
size 100 |
Quick change clamping head, size 100, serrated
Ø42-100 mm (Ø1.65-3.94 in), per dimension |
| Robo2Go |
Flexible workpiece loading and unloading system
with a six-axis-industrial-robot - Replaceable workpiece storage
incl. workpiece trays: - Max. 88 pieces up to dia. 60 mm (2.36 in) -
Max. 29 pieces up to dia. 125 mm (4.92 in) - Max. load of the
tray |
| Module 35 kg |
Module 35 kg - Max. load of the robot 35 kg
(77.16 lbs) - Triangular gripper base with outlet lance Note:
Indicated is the maximum load of the robot in the tool center point.
The maximum workpiece weight is depending on the grippers and the
workpiece le |
| 2-jaw gripper |
2-jaw gripper for: - Chuck and shaft parts -
Inside and outside handle 12kg module: Diameter 20-80 mm (shaft)
25kg and 35kg module: - Diameter 20-170 mm (shaft) - Min. workpiece
length 60 mm + Clamping depth (shaft) |
| 3-jaw gripper |
3-jaw gripper for: - Chuck parts - Inside and
outside handle - Min. workpiece length 20 mm (0.78 in) 10kg-module:
- Workpiece diameter 20-100 mm (outside) (0.78-3.9 in) 20kg &
35kg-module: - Workpiece diameter 25-175 mm (outside) (0.98-6.88 in)
- |
| Pressure adjustment |
Pressure adjustment - Manual adjustment of
gripping pressure for each gripper(A and B) individually in the
range of 2.5 - 6 bar - Mounted on robot arm |
| Workpiece tray for shaft parts |
Workpiece tray for shaft parts - Max. load of the
tray: 500 kg (1102 lbs) - Workpiece dia.: 20 - 170 mm (0.78-6.69 in),
workpiece length: 120 - 950 mm (4.72-37.4 in) - Incl. 5 workpiece
support kits (variably pluggable) with 50 mm (1.96 in)
division: |
| Pressure piece |
Elastic pressure piece for compensation angle
errors at sawing sections |
| Additional 3-jaw gripper |
Additional 3-jaw gripper for: - Chuck parts -
Inside and outside handle - Min. workpiece length 20 mm 12kg module:
Workpiece diameter: 20-100 mm (outside) 25kg and 35kg module: -
Workpiece diameter: 25-175 mm (outside) - Workpiece diameter: 65-210
mm (i |
| Additional 2-jaw gripper |
Additional 2-jaw gripper for: - Chuck and shaft
parts - Inside and outside handle 10kg module: - Diameter 20-80 mm
(shaft) (0.78-3.14 in) 20kg and 35kg module: - Diameter 20-170 mm
(shaft) (0.78-6.69 in) |
| Robot in white exterior paint |
Robot in special paint calcite white (RAL
9010) |