Máquina de grelhar de engrenagem - horizontal MIKRON A 33/1

máquinas para trabalhar metal / máquinas de corte e de denteamento

Fabricante: MIKRON

Modelo:A 33/1

Tipo de máquina: Máquina de grelhar de engrenagem - horizontal

Número do item: 156214217

Quantidade: 1

Data: 08.01.2025

Ano de fabricação: 1985

Localização: Land-de Alemanha Metzingen

Preço:


Máquina em estoque:Sim

Seller-item-No.:1049-448351

max. wheel diameter: 80 mm
gear width: 150 mm
max. module: 2,5
min. module:
total power requirement: 10 kW
weight of the machine ca.: 2400 kg
M I K R O N (Switzerland)
Fully Automatic Gear Hobber for Worm Gears
Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15
________________________________________________ ____________

max. gear- without feed magazine approx. 80 mm
max. gear- with feed magazine approx. 50 mm
Module max. 2, / 2,5

Axial milling length approx. 150 mm
max. workpiece-mounting length approx. 200 mm

Milling slide can be swivelled up to 90 degrees
Milling cutter - 24 - 50/63 mm
Max. radial distance of milling slide 0-14/18 mm
Milling cutter adjustment max. 25 mm
Milling cutter speed 212 - 2.000 rpm

Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation
radial infinitely adjustable 0,2 - 200 mm/min.

Milling spindle drive 3 kW
Total electrical load approx. 10 kW - 50 Hz - 380 Volt
Weight approx. 2.400 kg

Accessories/Special Features:
Fully automatic operation cycle and minimum idle times due to programmable
SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off
for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering
including 30 different numeric error displays
Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for
loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and H5141166 tailstock,
the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously.
The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper.
The whole process is electrically monitored and checked.
The complete loading facility is encased by plexiglass.
Hydraulic work piece clamping device including collets and hydraulic ejector
separate cooling system with magnetic separator separate hydraulic system various change gears

This machine is set up for worm gears/armature shafts that can be used for adjustable
car seats, window lifters, etc.




The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Compartilhe esta máquina em Facebook:

Inquérito

Negociante de máquinas?

Por favor remeter opcionalmente

Enviar o pedido?

Copie para você?

Save input data

max. wheel diameter: 80 mm
gear width: 150 mm
max. module: 2,5
min. module:
total power requirement: 10 kW
weight of the machine ca.: 2400 kg
M I K R O N (Switzerland)
Fully Automatic Gear Hobber for Worm Gears
Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15
________________________________________________ ____________

max. gear- without feed magazine approx. 80 mm
max. gear- with feed magazine approx. 50 mm
Module max. 2, / 2,5

Axial milling length approx. 150 mm
max. workpiece-mounting length approx. 200 mm

Milling slide can be swivelled up to 90 degrees
Milling cutter - 24 - 50/63 mm
Max. radial distance of milling slide 0-14/18 mm
Milling cutter adjustment max. 25 mm
Milling cutter speed 212 - 2.000 rpm

Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation
radial infinitely adjustable 0,2 - 200 mm/min.

Milling spindle drive 3 kW
Total electrical load approx. 10 kW - 50 Hz - 380 Volt
Weight approx. 2.400 kg

Accessories/Special Features:
Fully automatic operation cycle and minimum idle times due to programmable
SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off
for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering
including 30 different numeric error displays
Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for
loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and H5141166 tailstock,
the H5141166 tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously.
The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper.
The whole process is electrically monitored and checked.
The complete loading facility is encased by plexiglass.
Hydraulic work piece clamping device including collets and hydraulic ejector
separate cooling system with magnetic separator separate hydraulic system various change gears

This machine is set up for worm gears/armature shafts that can be used for adjustable
car seats, window lifters, etc.




The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

seller offer No. resale 1049-448351
Compartilhe esta máquina em Facebook:
revendedor
aprovado

Verkäufer

Hans-Jürgen Geiger Maschinen-Vertrieb GmbH

Senhor Michael P. Richter
72555 Metzingen
Germany

RESALE membro desde a 2014

  • lista de máquinas (236)

Inquérito

Negociante de máquinas?

Por favor remeter opcionalmente

Enviar o pedido?

(a todos os revendedores para tal máquina)

Copie para você?

(cópia da seu inquérito será enviado para seu endereço de e-mail)

Save input data

(Save input data for further inquiries)

Preço: sold MIKRON A 33/1 + similares MIKRON-Modelo

MIKRON153.07.01.332 450 EUR [Dec 2012]