Wheel diameter: 680 mm sawblade length: 8550 mm Sawblade width max.: 1,3 mm Cutting height: mm Motor output: 20 kW Table dimensions: 600 x 620 mm Feed speed: m/min. Machine height: mm Weight: 10.000 kg Bandsaw horizontal, Precision-Saw for Silicon (Solar industry) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Prensa de hambúrgueres D 07 Comprimento 1,20 m Largura 0.60 m Altura 1.70 m 2 Controlo manual Mudar para o controlo do pé 1 matriz de imprensa  ...

• mais informação

pressure:15 t throat:250 mm stroke:95 mm no. of strokes:0 - 60 /min distance table/ram, max. stroke up, adjustment up:300 mm table surface area:440 x 300 mm hole in the table:45 mm table height over floor:780 mm table adjustable:100 mm ram surface:100 mm weight:1,1 t dimensions (WxDxH):0,7 x 1,2 x 1,7 m

pressure:5 t throat:150 mm stroke:40 mm no. of strokes:0 - 80 /min distance table/ram, max. stroke up, adjustment up:260 mm table surface area:340 x 270 mm hole in the table:45 mm table height over floor:780 mm table adjustable:120 mm ram surface:60 mm weight:0,3 t dimensions (WxDxH):0,4 x 0,8 x 1,4 m

Prensa de alternância de ar comprimido BURGER tipo D04 Fabr. No. 4497 Ano de construção aprox. 1972 Força de compressão máx. 6 ton .Projeção 150 mm Curso do êmbolo 39 mm Tamanho da mesa 340 x 270 mm Falha na abertura 46 mm Altura de instalação máx. 160 mm Suporte para ferramentas 25 mm Pressão de funcionamento pneumático 5 bar Ligação de alimentação 220 V 50 Hz Regulador de pressão para ajuste da força de pressão - Ajuste de altura de elevação 7, 21, 40 mm - Interruptor de pé elétrico - Ajuste da altura da mesa Requisito de espaço L x W x H 700 x 500 x 1300 mm Peso 240 kg bom estado de conservação; usados

pressure at min. stroke:3 t throat:150 mm stroke:- 39 mm distance table/ram, max. stroke up, adjustment up:200 mm table surface area:280 x 380 mm pressure at min. stroke:1,5 t no. of strokes with min. stroke:- 80 /min no. of strokes with max. stroke:- 50 /min hole in the table:45 mm table height over floor:790 mm ram surface:115 x 100 mm Required air-pressure:4 bar weight:0,2 t Dimensions (WxDxH):0,5 x 0,9 x 1,4 m

pressure at min. stroke:3 t throat:150 mm stroke:- 40 mm distance table/ram, max. stroke up, adjustment up:200 mm table surface area:280 x 250 mm pressure at max. stroke:1,5 t no. of strokes with min. stroke:- 80 /min no. of strokes with max. stroke:- 50 /min hole in the table:45 mm table height over floor:810 mm ram surface:115 x 100 mm Required air-pressure:4 bar weight:0,15 t Dimensions (WxDxH):0,7 x 0,8 x 1,4 m

Two presses from different manufacturers are available. 1) Gechter SEM 70 KN, year of manufacture: 1990, pressing force: 70kN, type: knuckle-joint press, stroke: 5mm-62mm, max. installation height: 295mm, throat depth: 160mm, weight: approx. 350kg. 2) Two-stroke press Burger DO 3, pressing force: 3t, stroke rate: 80/min, throat: 140mm, stroke: 40mm, table dimensions X/Y: 280mm/380mm, working height: 810mm, ram surface: 115mm/100mm, machine dimensions X/Y/Z: approx. 800mm/1000mm/1400mm, weight: approx. 250kg. On-site inspection is possible.

 ...

• mais informação

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 180 to Total stroke: 150 mm Rapide stroke Execution: 4 columns Table surface: Length: 800 mm Width: 500 mm Distance from table to slide-nose: min.: 540 mm max: 690 mm Passage between columns: longitudinal: 460 mm Lateral: 260 mm Min. stroke: 16.6 mm/s Max. stroke: 83.3 mm/s Oil quantity: 300 l Voltage 50 Hz 3x: 380 Volt Necessary air quantity Machine´s weight about: 5000 kg Overall dimensions machine: Length: 2000 mm Width: 1800 mm Height: 3500 mm Various accessories: Lower extractor