| Descrição: |
Fresadoras de mesa redonda DMG MORI CTX alpha 450 TC
| General |
| Turn- mill machining centre; Control:
Siemens sl Operate3G without ShopTurn appr 2 channel |
|
| Tool magazine |
| Number of tools |
38 |
| Max. tool length |
250 mm |
| Max. tool diameter |
70 mm |
| Max. tool weight |
3 Kg |
| B-axis Turning-milling
spindle |
| Swivelling range |
+/- 120 degree |
| Speed range B3 |
100 rpm |
| Angular value, min. |
1 degree |
| Turning-milling spindle |
| Spindle taper |
Capto C5 |
| Drive power (100% DC) |
5,5 kW |
| Spindle speed |
-20000 rpm |
| Drive power (40% DC) |
7,5 kW |
| Torque (100% DC) |
22 Nm |
| Torque (40% DC) |
30 Nm |
| angular value, min. |
5 degree |
| locking moment |
700 Nm |
| B-axis counter spindle |
| Positioning angle B3-axis, in 5 degree
steps |
0 - 225 degree |
| Speed range B3 |
40 rpm |
| Slide 3 |
| Longitudinal stroke |
665 mm |
| Rapid traverse Z |
36 m/min |
| Slide 1 |
| Longitudinal stroke |
454 mm |
| Transverse stroke |
380 mm |
| Rapid traverse in X |
40 m/min |
| Y axis, vertical |
+/- 105 mm |
| Rapid traverse in Z |
50 m/min |
| Rapid traverse in Y |
40 m/min |
| Headstock, right |
| Clamping chuck Ø |
140 mm |
| Spindle bore |
38 mm |
| Spindle diametre on front bearing |
70 mm |
| Type of main drive |
AC |
| Speed range |
- 6000 rpm |
| Torque (40% DC) |
30 Nm |
| Torque (100% DC) |
22 Nm |
| Drive power (40% DC) |
7,5 kW |
| Drive power (100% DC) |
5,5 kW |
| C-Axis Speed |
250 rpm |
| Headstock, left |
| Clamping chuck Ø |
200 mm |
| Speed range |
- 5500 rpm |
| Torque (40% DC) |
220 Nm |
| Torque (100% DC) |
150 Nm |
| Drive power (40% DC) |
11 kW |
| Drive power (100% DC) |
7,5 kW |
| Spindle diametre on front bearing |
110 mm |
| Type of main drive |
AC |
| Spindle bore |
73 mm |
| C-Axis Speed |
250 rpm |
| Working area |
| Swing diameter over guide ways |
370 mm |
| Turning diameter |
370 mm |
| Distance between spindles |
870 D41252871 mm |
| Max. Turning Length |
450 mm |
| Floor space/Weight |
| Dimensions (L x W x H) |
3,57 x 2,69 x 2,87 m |
| Weight approx. |
10000 Kg |
| Standard equipment |
- subspindle as integrated spindel motor
power 5,5/7.5 KW (7,37/10.05 hp) (100/40% ED), 6000 rpm - hydraulic
clamping device, - C-axis and brake (hydr.) - absolut, direct
measuring systems in linear axes X1, Y1, Z1 - coolant pump 8 bar; 35
l/min ( |
| Standard equipment |
- Turret below - chip conveyor, discharge hight
600 mm (23.62 in) - cooling unit for spindle motors, turn-
millspindle, B-axis-torque motor - USB-interface,
ethernet-interface |
| Hollow clamp. attachment dia. 66mm (max.
5.500rpm) |
Hydraulic hollow clamping attachment dia. 66 mm
(2.598 inch) Pull force 68 kN (15.87 lbf) at pmax 45 bar (653 psi),
max speed 5,500 rpm |
| Chuck rinsing device, outside |
chuck rinsing device, outside (main spindle) |
| Chuck rinsing device, outside, counter
spindle |
Chuck rinsing device for counter spindle,
outside |
| Cooling pressure 8/20 bar, box 600 l |
Compact coolant system, consisting of: - coolant
tank, 600 litre/158.5 gal - 8 bar/20 litre/min and 20 bar/40
litre/min (116.psi/5.2 gal/min and 290 psi/10.5 gal/min)
programmable via M-functions coolant supply turning/milling
spindle - band f |
| Interface for bar feed/loading
magazine |
interface for bar feeder or bar loading
magazine |
seller offer No. resale 071627
|