- Rotary Ø: 340 mm - Comprimento de viragem: 1050 mm - Altura central: 170 mm - Faixa de velocidade: 20 - 2500 rpm - Quill curso: 160 mm - Forro: Ø 250 mm - 4 -mandíbulas - Passagem do eixo: 55 mm - Requisitos de espaço (L x P x A): aprox. 3,1 x 1,1 x 1,5 m - Peso da máquina: 2.200 kg - Potência total: 5,5 kW - Condição: bom Acessórios Mandril de 3 mandíbulas Ø 250 mm, placa facial Ø 510 mm, suporte em aço Multifix B com 4 pastilhas, luneta

Altura da ponta: 265 mm Largura central: 1500 mm Ø circunferencial: sobre a cama 540 mm Furo do eixo: 65 mm Suporte do eixo: tamanho 8 Pick-up cone tailstock: 5 MK Velocidades do eixo: 9 - 1800 rpm Alimentação: longitudinal/plana 0.063-2.24/0.032-1.12 mm/rev Inclinações de rosca: 0.35 - 560 mm Conexão elétrica: 380 V, 11 kW Requisito de espaço: 4580 x 1250 x 1330 mm Peso: 3200 kg

Center height: 0 mm Center distance: 1000 mm Spindle bore: 55 mm SPECIFICATIONS Swing over bed Ø 520 mm Distance between centres 1000 mm Spindle bore  55 mm Spindle speeds / ranges  1120 Rpm  ...

• mais informação

turning diameter: 300 mm turning length: 2000 mm swing diameter over bed slide: 520 mm total power requirement: 7,5 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 4745 mm x 1340 mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• mais informação

turning length: 1000 mm turning diameter over bed: 430 mm turning diameter over slide rest: 235 mm spindle turning speed range: 11.2 - 2000 U/min spindle bore: 56,0 mm morse taper: 4 MK quill stroke: 135 mm bed width: 333 mm spindle taper: DIN 55022 Gr. 6 total power requirement: 7,75 kW weight of the machine ca.: 1950 kg. dimensions of the machine ca.: 2700 x 1200 x 1600 mm from a workshop for the disabled () Furnishing: - robust master/feed spindle machine - FORKARDT 3-jaw chuck Ø 200 mm (DIN 55027 size 6) - HEIDENHAIN digital display - MULTIFIX steel holder, with insert - Movable tailstock - chuck key - chip rear wall - sliding bed stop - Protection for bed rails - live center - Coolant ...

turning length: 1250 mm turning diameter over bed: 430 mm turning diameter over slide rest: 260 mm bed width: 333 mm spindle bore: 56.0 mm turning speeds: 19.0 - 2000 U/min tailstock quill taper MT: 4 quill stroke: 155 mm adjustment: Plan 275 mm adjustment: Ober 115 mm spindle head: DIN 55022 GR 6 total power requirement: 1.8 - 7.5 kW weight of the machine ca.: 1800 kg range L-W-H: 3600 x 1400 x 1400 mm well-maintained condition with lots of special accessories () Equipment: - robust lead/spindle lathe - RÖHM 3-jaw chuck Ø 250 mm, including replacement jaws - 3-jaw chuck Ø 315 mm, including replacement jaws - Longitudinal feed, with rapid traverse - Face feed, with rapid traverse - MULT ...

turning diameter over bed: 520 mm turning diameter over slide: 150 mm turning length: 1100 mm centre distance: 1250 mm centre height: 260 mm 3-jaw chuck: Röhm, Ø 250 mm spindle bore: 62 mm turning speed range: 22,4 - 1120 U/min power capacity: 7,5 kW weight of the machine ca.: 2,5 t Steel holder system Multifix size C 2 quick-change cassettes center point MK 5 The machine is in good condition and has been used very little. Low spindle play, guideways very good without scoring. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Referência-N.º: 10257 Fabricante: HEIDENREICH & HARBECK Ano construção: 1981 Tipo de controlo: Konventionell Local de armazenamento: Halberstadt País de origem: Deutschland Número da máquina: 80-0512-0562 Velocidades de giro: 20-2000 RPM Comprimento da máquina: 2.900 mm Largura da máquina: 1.200 mm Altura da máquina: 1.800 mm Peso da máquina Ca.: 3,5 t Tipo de porta-ferramentas: Multifix Typ B Comprimento de giro: 1.000 mm Diâmetro de giro sobre a cama: 480 mm Diâmetro de giro sobre o descanso deslizante: 295 mm Diâmetro da luneta (interior): 1 x 145, 1 x 255 mm

: . distância central: 3000 mm máximo. Diâmetro do balanço: 660 mm multifixo: . estável: 2 peso Stück da máquina ca.: 5 t : KW 39/2022  ...

• mais informação

turning diameter over bed: 540 mm turning diameter over slide rest: 270 mm turning length: 2500 mm spindle passage: 60 mm turning speeds: 600 U/min Rapid travel: steady for max. workpiece diameter from: 270 mm steady for max. workpiece diameter from: 170 mm faceplate: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.