We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree

Systemy okienne WEINIG Univar 6 P

maszyny do obróbki drewna / maszyny do produkcji okien / Systemy okienne

Gebr. Engelfried oHG
[ profil dealera ]

Pan Florian Engelfried
73432 Aalen
Germany

  • 07361-986... telefon

zatwierdzony
sprzedawca
verified user

RESALE członek od 2014

  • lista maszyn (192)
Wyślij zapytanie
Dodaj do listy oglądania
Wyślij zapytanie
Numer pozycji: 163920618 Ilość: 1 Data: 08.11.2024
Rok produkcji: Lokalizacja: Deutschland
Cena: 6,000 EUR
Producent: WEINIG
Model: Univar 6 P
Typ maszyny: Systemy okienne
Opis: Systemy okienne WEINIG Univar 6 P

używana maszyna

Number of boring spindles: 3 St.
Number of tools: 1.3/4.1. St.
Spindle diameter: 50,40 mm
Spindle length: 120,320,125 mm
weight: 2500 kg
loading dimensions L x W x H: 3800x1400x2000 mm
table length: 3470 mm
Weinig Univar 6 P
In order to sell
----------------------
Operating voltage: 380 volts, 50 periods.

For milling around windows, doors and similar with uneven edges
Profiles.

Arrangement of the aggregates:
1. Synchronous spindle on the right, pneumatically clocked.
2. Profiling spindle on the right
3. Fitting spindle

Profiling spindle suitable for holding several tools one on top of the other.
Spindle movement pneumatic.

The 1 spindle works in synchronization for tear-free milling. Respectively
This spindle plunges the last 100 mm of a frame end with the
Insert the appropriate tool into the wood to prevent tearing at the frame
corners
avoid.

Machine stands, tables, stops:
Machine body made of heavy, torsion-free and vibration-damping
elements. Stops on the right in the profiling area made of Pertinax. Before
Profiling spindle a split stop with sliding bar for short parts.
Additional opening rail for large format frames.

Feed system:
Continuous, chainless feed equipped with rubber rollers. Blow-off device
for feed rollers and table.

Spindles, hood:
Spindles with high concentricity and dynamically balanced. Extraction hoods
designed for the cheapest chip flow. Easiest tool change
Quick-opening hood lid.

Machine operation, setting aids:
Operating the machine from the front. Setting the stops for
Tool diameter using mechanical number display.

Machine electrics, motors, controls:
Electrical design according to DIN VDE 0113 - Electrical equipment from
Industrial machines EN 60204 IEC 204-1.
Further electrical regulations are not taken into account.

Engines dynamically balanced.

Control of tool positions via selector switch on the control panel.

Tools:
Machine equipped with operating tools, but without
Editing tools.

SPINDLE 1

Synchronous spindle
Number of tools: 1
Spindle speed: 6000 rpm
Spindle diameter: 50mm
Tool clamping length: 120 mm
Tool diameter max. (milling): 232 mm
Tool zero flight circle: 112-140 mm
Basic position under table: 10 mm
Motor strength: 4 KW (5.5 KW)

SPINDLE 2

Number of tools: 4
Spindle stroke vertical: 3 x 80 mm = 4 tools
Can be switched to 2 x 95 mm = 3 tools
Spindle speed: 6000 rpm
Spindle diameter: 50mm
Tool clamping length: 320 mm

Feed profiling unit: 8 m/min
Feed roller width: 50mm/35mm
Feed roller diameter: 95 mm
Stop height: 70 mm
Working width: min. 30 mm, max. 220 mm
Working height: min. 30 mm, max. 100mm
Workpiece length without tenon: min. 245 mm


Tool diameter max.
For zero diameter 112 mm: 210 mm
For zero diameter 140 mm: 232 mm

Tool diameter max. (milling): 232 mm
Tool zero flight circle: 112-140 mm
Basic position under table: 10/5 mm
Motor strength: Spindle: 11 KW Feed: 1.1 KW
Feed profiling unit: continuously 6-12 m/min
Feed roller width: 50 G41112123 mm
Feed roller diameter: 95 mm
Stop height: 70 mm
Working width: min. 30 mm, max. 220 mm
Working height: min. 30 mm, max. 100mm
Workpiece length without tenon: min. 245 mm

Special equipment:

3 Mechanical spindle brake for synchronous spindle, profiling spindle and
Additional aggregates

SPINDLE 3

1 fitting milling unit, right: for milling the fitting groove in the
Milling pass or for grooving in the longitudinal profile.
Pneumatic horizontal movement with selector switch in the control panel.
Motor power: 2.2 KW
Speed: 6000 rpm
Spindle diameter: 40mm
Clamping height: 125 mm
Tool flight circle: min. 140 mm, max. 180 mm
Basic position below table level: 10 mm

Motor reinforcement for synchronous spindle from 4 KW to 7.5 KW

Motor reinforcement for profiling spindle from 5.5 KW to 11 KW

Screen controls for 99 window types. 1 type can hold up to 8 different parts
contain. Manufacturing options: individual parts, milling. Data entry via
Keyboard with integrated operator guidance and error diagnosis.
Free-standing control cabinet
---------------------------------

(technical data according to manufacturer - no guarantee!)



The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

seller offer No. resale 1305-6827
Maszyna w magazynie: Tak
Seller-item-No.: 1305-6827
Udostępnij tę maszynę na Facebook:

Zapytanie ofertowe

Handlowiec maszyn?

Proszę wybrać opcjonalnie

Wyślij zapytanie?

(wszystkich sprzedawcami takiej maszynie)

kopia do ciebie?

(kopia twojego zapytania zostanie wysłany na adres e-mail)

Save input data

(Save input data for further inquiries)

więcej WEINIG Univar 6 P + similar WEINIG-Model

WEINIGUnivar 10
WEINIGUnivar 10
WEINIGUnivar 10/3
1998 WEINIGUnitec 10 + Univar 10 17000 EUR
1998 WEINIGUnivar 10 8500 EUR
WEINIGProfimat 23 Fortec 21533 EUR
WEINIGProfimat 23
WEINIGProfimat 22N
WEINIGProfimat 22N 8386 EUR
WEINIGPowermat 1200 EM 100 High-Mech

Cena: sold WEINIG Univar 6 P + podobne WEINIG-Model

WEINIGUnivar 6 3000 EUR [Jan 2020]
1998 WEINIGUNIVAR 10 5000 EUR [Mar 2017]
1999 WEINIGUnivar 5000 EUR [Apr 2022]
WEINIGUNIVAR 10 18500 EUR [Sep 2017]
WEINIGUNIVAR 6 5500 EUR [Dec 2013]
WEINIGUnivar 10 5000 EUR [Nov 2021]
WEINIGUNIVAR 10 17500 EUR [Apr 2017]
WEINIGUNIVAR 3900 EUR [Mar 2013]
WEINIGUNIVAR 10 18500 EUR [Sep 2017]
WEINIGUNIVAR 6 5500 EUR [Dec 2013]
... zobaczyć więcej Cena Login