| Opis: |
Zespoły tokarek (CNC) TRAUB TNA 700 Flex
używana maszyna
turning diameter: 700 mm
turning length: 1250 mm
control:
TX8_i
total power requirement: kW
weight of the machine ca.:
15 t
dimensions of the machine ca.: 6,0 x 2,5 x 2,2 m
CNC
control TX8_i
9 CNC axes (X1, X2, Z1, Z2, Y1, B1, B2, C1,
C2)
Software functions:
Tool life monitoring,
Polyform,
3D-Helical IP, synchronous threads without L compensation,
WOP
Traub Win_Flex IPS incl. Mouse,
MAIN SPINDLE (direct drive,
adjustable hollow shaft motor)
Spindle connection A-11 > DIN
55026/ 55021
Alignment and switching device
Hollow clamping
cylinder > spindle passage max. 102 mm speed max. 3,000 rpm
Front
bearing dm170 mm
Drive power 100/40% ED 53 / 68 kW, torque 675 /
900 Nm
C-axis resolution 0.001 °
Spindle locking for extreme
roughing work 2.5 °
Counter spindle (direct drive, adjustable
hollow shaft motor)
Spindle connection A-11 > DIN 55026/
55021
Alignment and switching device
Full clamping cylinder
SINS-140 > Spindle passage max. 102 mm Speed max.
3,000
1/min
Drive power 53 KW
Front bearing dm170 mm
Power
100/40% ED 53 / 68 kW Torque 675 / 900 Nm
C-axis resolution 0.001
°
12-way TOOL CARRIER Top
(X1, Z1, Y1, B1, B2, C1,
C2)
All stations with milling drive
Driven speed Tools 6,000
rpm, torque 35 Nm
X-axis travel (glass scale) 320 mm
Z-axis
travel (encoder) 1,250 mm
Rapid traverse X/Z 15 / 30
m/min
Feed force X 12 / Z 15 KN
Ball screw Ø in X-axis 40
mm
Ball screw Ø in Z-axis 50 mm
10-way TOOL CARRIER
Below
(X2, Z2, B2, C1, C2)
All stations with milling
drive
Driven speed Tools 6,000 rpm, torque 35 Nm
Working path
X-axis (glass scale) 212 mm
Working path Z-axis (encoder) 1,250
mm
Rapid traverse speed X/Z 20/ 40 m/min
Feed force X 8.6 / Z
14 KN
Tool holder system DIN 69880-40x63
Ball screw Ø in
K412523 X-axis 40 mm
Ball screw Ø in Z-axis 50 mm
Dimensions:
L=6,000mm, D=2,500mm, H=2,200mm
Weight 15
t
Accessories:
Automatic sliding door with protective strip,
hydraulic. Activated
Clamping device flushing function from the
outside
2 3-jaw chucks dm 315mm on main and counter
spindle
High-pressure flushing and fine filter
Oil mist
extraction and filter system SH 2000 PEV
Hinge belt chip
conveyor
WZG package
5 pcs. WZG holders HSK-63 for milling
spindle,
3 pcs. fixed turning holders VDI-40, for each
turret,
2 pcs. AGWs Axial VDI-40, for each turret,
2 pcs. AGWs
Radial VDI-40, for each turret,
The data for
this ad was created with ModulMWS - the software solution of LogoTech
oHG.
seller offer No. resale 1022-H08970
|