turning diameter: 36 mm
turning length: 280 mm
control: 840 D
Siemens
turning speed range - drive spindle: 6300 U/min
drive
capacity - spindle motor: 3,3 kW
turret 1: Scheibenrevolver
no. of tools in turret 1: 8
worktool system: DIN 69 880 /
25mm
x-travel: 90 mm
z-travel: 280 mm
feed power: 5500
N
rapid traverse: 24 m/min
power capacity - milling spindle:
5000 kW
turret: Schwalbenschwanz
no. of tools in turret 2: 6
x-travel: 81 mm
z-travel: 80 mm
feed power: 5500
N
rapid traverse X-axis: 16 m/min
rapid traverse Z-axis: 24
m/min
weight of the machine ca.: 2,5 t
dimensions of the
machine ca.: 6,0 x 2,0 x 2,0 m
The INDEX ABC machine is a compact
lathe for short turned parts made from bar
stock.
It has
an inclined bed design with two independent turrets.
The top
turret is primarily intended for internal machining and
machining,
while the lower turret is used for external machining.
The
turret arrangement enables collision-safe working and simple
programming
programming with high tool availability.
The
large free space in the working area enables a favourable chip
fall
The work area consists of two
turrets:
‘Turret 1’
- Disc turret with 7 radially
arranged tool holders Ø 25 mm DIN
69880 and a holder for the
reinforced synchronised spindle on the turret station
8. tools
with 1’ holders can also be used with an equalising holder can also
be
used. The turret is prepared for the V-ledge
system.
- Synchronised spindle for rear end machining,
simultaneous parallel machining
with main spindle. Ø42 collet
chuck or 3-jaw gripper chuck for internal and
external clamping
and external clamping. Jaw stroke 0.6 mm. Clamping diameter
(external) 75 mm.
- Back-boring device.
Starting
from the centre of the working spindle in clockwise direction, 3
stationary back-boring tools are back boring tools are arranged.
These are
located in the pitch circle of the
synchronised
spindle. The back machining is carried out simultaneously with the
machining on the the working spindle. Two additional tools can
also be used,
can be equipped with a tool feed
drive.
‘Revolver 2’
- E5332339 Turret with 6
symmetrical dovetail holders and each station with 2 locating
holes for cylindrical shank per station.
The following
tool systems can be used.
- stationary tools that can be moved in
the Z direction
- Driven tools with cylindrical shank Ø25 (can
be used in two positions per
station)
can be used)
-
including bar loader LM 3200 -
Technical data:
-
Material bar diameter: (Ø 25 / Ø 36 / Ø 52)-
--> round Ø 8 -
25.4 / 8 - 36 / 8 - 52 mm
--> square SW Ø 6 - 14 / 6 - 20 / 6 -
20 mm
--> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm
-->
octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm
--> bar length
max. 3200 mm
--> from bars Ø 25 mm, min. 2,500 mm
--> up to
rods Ø 25 mm, min. 1,500 mm
--> bar support = approx. 300 =
6 bars Ø 52 mm
Mass (bar loader) = 700
kg
The data for this ad was created with
ModulMWS - the software solution of LogoTech oHG.