- Workpiece length   All units max. approx. 5200 mm   Milling cutter 25 mm max. approx. 5375 mm - Workpiece width   Rear stop for all units max. approx. 1400 mm   Rear stop cutter 25 mm max. approx. 1550 mm   Front stop for all units max. approx. 1150 mm   Front stop milling cutter 25 mm max. approx. 1220 mm - Main spindle 18.5 KW with C-axis   Speed 0 - 24000 rpm - 72-speed chain changer - Milling spindle 6 KW - LED console position indicator - Chip conveyor belt and articulated belt conveyor (Further tools and units for the tool changer are not included within delivery. Availability depends on the delivery of the new machine. A transport rack from HOMAG is required f ...

Konsola ze wskaźnikiem położenia przyssawki LED, 8 ręcznie przesuwanych wsporników (długość 1340 mm) każdy z 3 przyssawkami, 6 szyn nośnych Mocowanie detalu za pomocą pompy próżniowej 100/140m³/h System LED do zacisków próżniowych, Z-laser (laser sufitowy) do wyświetlania konturów Obszar roboczy X 4175 mm Zakres roboczy Y do 1875 mm (frezowanie z drm 25mm), 1600mm wszystkie jednostki Zakres roboczy Z 300 mm Głowica wiertarska MPU (z osią C): 30 wrzecion: 20 z nich pionowych; 10 poziomych wrzecion wiertarskich, Piła do wpustów max. 200mm drm Wrzeciono główne 15 kW, chłodzone cieczą, z czujnikiem drgań i osią C 360 grd. , Interfejs dla jednostki Flex-5+ 1 ...

HOMAG PROFI BOF311/60/F/KC 5 axis processing centre • Fully automatic CONSOLES - CLAMPING TABLE KC    - 10 clamping consoles with automatic positioning unit    - 30 automatically positionable platforms for holding the vacuum clamps    - 4 lifting rails attached to the side of the consoles •  5 axis main spindle 15 kW liquid cooled.     - Speed range continuously programmable from 1000 - 24000 rpm. • Drive 5+ unit interface for the use of machining units.  • Drilling head 17 spindles vertical  - 1 motor 2,7 kW, frequency controlled Speed max. 7500 1/min  - 7 spindles vertical in X-direction  - 11 spindles vertical in Y-direction - 4 spindles horizont ...

ATTENTION: Location 97944 Boxberg- Windischbuch, Germany Very well maintained HOMAG Optimat BOF 311/60/K CNC processing center. Technical data: Workpiece length all aggregates - single loading max. 6.000 mm and pendulum loading max. 2.375 mm Workpiece length tool diameter with 25 mm - Single occupancy max. 6,175 mm and pendulum occupancy max. 2,550 mm Workpiece width all units - Front max. 1,450 mm and rear max. 1,700 mm Workpiece width tool diameter with 25 mm - Front max. 1,525 mm and rear max. 1,850 mm Workpiece thickness - Max. 300 mm incl. clamping device Clamping table Console with LED display in X and Y direction - Console length 1640 mm Main spindle 15 KW and ...

Windows PC -defect; not working 5200x2700x2800 mm 5000 kg unchecked loaded on truck ...

• więcej informacji

Manufacturer: HOMAG Optimat , Type: BOF 32/30/K, Year: 1999, Control: Homatic, Maschinensteuerung: 80, Programming station office: 3600, Work piece width min-max mm: 1200, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 1, Throuh running machine: 2, Feeding speed max m/min: HSK 63, Working range X: 12, Working range Y-axis: 24000, Working range Z: 12, Working range Y-axis: 24000, B-axis: 2, Pendulum processing: 12, Tool adaption system: 2 X 12, Milling engine 1 hours power: 2 X 7, U/min 1) Vertikal: 2 X 6, Milling engine 2 hours power: 2 X 6, Frässpindel horizontal 1 kW: 4, U/min 1) Horizontal: yes, Bohrergetriebe Horizontal: 2 X 120 , Kettenwechsler: no, Working wi ...

Manufacturer: HomagTürenfertigung mit mit Verleimteil und KUKA Roboter, Type: BOF / BAZ20/50/18/2/D, Year: 2002, Control: Homatic PC 83, Software: Woodwop, Work piece width min-max mm: 1600, Min.-max. workpiece length in mm: 800 - 3500, Min.-max. workpiece height in mm: 12 - 60/120, Working range X: 5800, Working range Y-axis: 1600, Working range Z: 160, C axis: 2, Work piece width min-max mm: 1600, Min.-max. workpiece length in mm: 800 - 3500, Min.-max. workpiece height in mm: 12 - 60/120, Number of milling spindles vertical: 2, Tool adaption system: HSK F63, Milling engine 1 hours power: 14,5, rpm 1): 1500 - 18.000, Milling engine 2 hours power: 14,5, rpm 2): 1500 - 18.000, Kettenwechsler ...

Manufacturer: Homag mit Verleimteil, Type: Optimat BOF / 40 / G , Year: 2000, Control: WoodWOP, Programmierplatz Büro: yes, Work piece width min-max mm: 1050/1200, Min.-max. workpiece length in mm: 4800, Min.-max. workpiece height in mm: 60/200, C axis: yes, Tool adaption system: HSK F63, Milling engine 1 hours power: 12, rpm 1): 1500 - 18000, Number of tool changers: 1, Number of tools per tool-magazine: 12, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 11, Drill vertical Y: 7, Horizontal drills-X: 4, Aluminium sleeking table: yes, 2 station allocation: 2, Stops in the table front: 6 , Vacuum pumps m³/h: 120, Saw unit: yes, Edgebanding unit: no, Marking laser: Laserpositioner ...

Technical details: Working length all aggregates X-axis 4000 mm working length with tool diameter 25 mm X-axis 4175 mm working width all aggregates Y-axis front 1450mm and back 1600 mm working width with tool - Ø 25 mm Y- axis front 1525 mm and back 1730 mm working width with edge banding unit Y-axis front 1525 mm and back 1650 mm Working table with 8 con­soles  LED-positions-system X- and Y-axis 15 kW main spindle vector controlled rotating current asynchronous motor 1000 - 24000 rpm Easy Edge edge banding aggregate a edge height 16-45 mm  Combi-flush trimming scraping unit  2-spindle sawing/Cutting unit: for grooving and sawing FLEX5 sawing/drilling unit with automatic swi ...

Manufacturer: Homag BAZ , Type: 211 Venture 22 L, Year: 2006, Control: Woodwop/Powercontrol PC 85, Software: Softwarepaket AV, Work piece width min-max mm: 4400 X 1550, Feeding speed max m/min: X= 80/Y=80/Z=30, C axis: yes/Schnittstelle Flex 5, Pendulum processing: yes, Work piece width min-max mm: 4400 X 1550, Number of milling spindles: 1, Number of milling spindles vertical: 1, Tool adaption system: HSK 63 F, Milling engine 1 hours power: 12, rpm 1): 1500-24000, Number of tool changers: 1, Tellerwechseler: 1, Pickup Wechlser: Verleimteil/Easy Edge, Number of tools per tool-magazine: 18, Vertical drills-X: 11, Drill vertical Y: 7, Horizontal drills-X: 1, Drill horizontal Y: 2, Traverse tab ...