Used Amada LCV 3015 B2 laser cutting machine Iron up to 20 mm Stainless steel up to 12 mm Aluminum up to 6 mm ...

• więcej informacji

Numer inw. : 7433 typu: LC 3015 F1 NT Producent: AMADA Utworzono: 2009 Parametry: 2018 GO: Rezonator i turbosprężarka Układ sterowania: Fanuc AF4000i-B Cykl pracy: 21600 h Moc lasera: 4 kW Długość stołu roboczego: 3000 mm Szerokość stołu roboczego: 1500 mm Masa maszyny: 11000 kg Sprzęt: Próżnia Układ chłodzenia

X-axis: 3070mm, Y-axis: 1550mm, Z-axis: 100mm, max. workpiece weight: 920kg, cutting capacity VA: 0.5-4mm, steel: 0.5-4mm, aluminum: 0.5-5mm, control: AMNC/PC, connected load: 18.4kVA, length: 9300mm, width: 2900mm, height: 2000mm, weight: 12t. With laser source AJ2000 2kW, automatic material tower ASLUL300F1, LKI Wöldman, compact dust extractor and programming software. On-site inspection is possible. Available in February 2025.

Manufacturer / Type: AMADA FOL 3015 AJ 4kW Year of manufacture: December 2013 (in operation at D&G since June 2015) Operating hours: Laser-ON 20,090 h (switch-on time 36,270 h) Visual condition: Very well maintained. Relatively few signs of wear despite comparatively high operating Operating power Functional condition: Laser output reduced to approx. 2000 kW due to individual defective laser modules in the resonator. 2000 kW due to individual defective laser modules in the resonator. Machine otherwise works perfectly - see current maintenance/service report dated 21/02/2024 Maintenance/service: Was carried out by the manufacturer at regular intervals in accordance with regulations car ...

2015 Amada LCG-3015 A laser cutting machine, model LCG-3015 with an AF3500i-C laser resonator The machine is in perfect condition Age 9 years and about 9000 operating hours General Specifications Model: LCG-3015 Laser Resonator: AF3500i-C Transport Measurements and Weights Machine without Transport Crate (L x W x H): 6617 x 2655 x 2166 mm Weight: 8200 kg Pallet Changer (L x W x H): 3415 x 2240 x 845 mm Weight: 3000 kg Transport Dimensions Pallet Changer (L x W x H): ~3800 x 2350 x 1300 mm Weight: ~3300 kg Air Supply Requirements General Air Supply (when air is not used as cutting gas): 6 bar; 98 m³/h 6 bar; 75 m³/h 6 bar; 18 m³/h 6 bar; 5 m³/h Air Supply (when air is  ...

Pragniemy sprzedać naszą używaną wycinarkę laserową Amada, typ LC-3015, zbudowaną w 1997 roku z powodu braku miejsca: Długość stołu: 3000 mm, Szerokość stołu: 1500mm, Moc lasera 3kW, Godziny: 8103, maksymalne obciążenie stołu wymiennego 750 kg, Max. grubość cięcia 20mm (stal normalna) 12mm (stal nierdzewna), Prędkość zabiegu X, Y / Z 40/20m/min, Ekstrakcja, chłodzenie BKW Falgenbalk został przez nas odnowiony.

CO2 laser cutting machine (AMADA type FO-3015 MII NT CI) - 4000 Watt resonator w standard equipment according to the offer: travel range 3070 x 1550 x 200mm maximum thickness of cut material: Normal steel - 20mm Alloy steel - 12mm Aluminum - 10mm displacement speeds of 113m / min specially cast machine bed pallet changing system telescopic cabin - protection against radiation laser head with capacitive sensor programmable Z axis diode laser for positioning laser power control (DR) Intelligent Cut Control - (ICC) auto focus recognition of the position of the sheet Active Cut - rays telescope Clean Cut Alu Cut Powe ...

Used Amada FO 4000 W laser cutting machine Year 2004 Power 4 Kw max cut FE 15 mm Stainless steel 10 mm Laser used daily always maintained documentable. ...

• więcej informacji

-resonator power:4 kW -machining range:3000x1500 mm -Z axis range:100 mm -maximum cutting thickness black steel:20 mm -maximum cutting thickness stainless steel:12 mm -maximum cutting thickness aluminum: 10 mm -maximum load on the table:920 kg -machine weight:11000 kg -automatic storage ...

• więcej informacji

Serial Number: 097 Working details:  Working Area:  X: 3070 mm Y: 1550 mm  Axis displacement                                      X: 3420 mm Y: 1550 mm Z: 200 mm Cutting speed: X,Y: from 0 to 20 mt/min  Max. weight on the table: 840 kg  Assist gas control: Automatic  Max. working height: 840 mm  Weight of machine: Approx. 12.000 kg (excl. dust collector, cooler and changeoderver)  Power requirement: AC 200/220V ±10% 50/60Hz 27 Kva (excl. dust collector, cooler and pallet changer)  Laser  Model: AF 4000 i-B Maximum Power 4,000w Frequency: 5 to 2000hz Laser Type: Co2 Circular Polarisation  Laser gas consumption A ...