Direct measuring system |
Direct path measuring system |
Spindle speed 15,000 rpm, 200Nm |
Motor spindle speedMASTER® HSK-A63 Spindle speed
20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm /
130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle) |
NC swivel rotary table |
Swivel Rotary Table for simultaneous machining
Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to
+110°, rotary axis 360° including direct measuring system for B- and
C-axis and working plane transformation |
Tool magazine 60 pockets |
Tool magazine 60 places HSK-A63 Vertical chain
with double gripper incl. set up station for tool loading |
Package ICS/swarf conveyor 600 L
(aluminium) |
Swarf conveyor scraper type, with wedge wire
screen and suction pump Internal coolant supply Papertype-Filter 40
Bar // 580 psi Tank capacity: 600l // 158,5 gallon incl. cabin roof,
rotary joint in spindle, Double cartridge filter 50 µm (recommended
fo |
Chip flushing for working area |
Chip flushing for working area rinsing line on the
right side panel, backside of machine bed, cabin left and right
activated or deactivate by M function´s (only in combination with
internal coolant supply, not with 20 bar ICS) |
Double cartridge filter, 25 µm |
Double cartridge filter, Finesse of filtration 25
µm, manually reversible (only in connection with separate paper-type
filter) |
Rotating clear-view window |
Rotating clear-view window (only available with
option cabin roof) |
Oil- and emulsion mist separator
mechanical |
Oil- and emulsion mist separator mechanical (only
available with option cabin roof) |
Infrared measuring probe TS460 |
Infrared touch probe make Heidenhain TS 460 |
Laser tool measuring |
Laser tool measuring, fix mounted at machine
column Tool lenght and diameter measuring automatically cleaning
through external airblast Calibration tool with taper |
3D Quick SET |
3D quickSET Tool kit for control and compensation
of the cinematic accuracy of 5 axis machine configurations (only with
option touch probe) |
MPC Machine Protection Control |
MPC Machine Protection Control Machine protection
by quick D4952871 shutdown |
Signal lamp 4-colour |
Signal lamp 4 colour Red: general error Yellow:
intervention necessary Green: automatic mode Blue: set-up mode |
DXF Reader |
DXF-Raeder: Open CAD files Extracting of counters
and drilling positions directly in G-code and ShopMill programs
Supported elements: drilling positions and contours |
Operation mode 4 |
Operation mode 4 Process monitoring in the
production Manual intervention with open doors of machining area.
Release after check list has been filled in. |
Package for tropical climate for
speedMASTER® |
Package for tropical climate for speedMASTER®
for ambient temperature max. 50°Celsius: includes active cooling for
electrical cabinet, active cooling main spindle drive / motor
spindle |
3D data model |
3D data model in STEP format for integration in
CAD System by the customer. It is used for machine simulation.
(shipping against signed non disclosure agreement) |
IoTconnector |
IoTconnector The IoTconnector allows the use of
online services of DMG MORI (e.g. NETservice) |
Machine Data Connector |
Machine Data Connector (MDC) Uniform machine data
interface. |
NETservice |
NETservice Qualified support by Internet-based
remote diagnostics |
Messenger V4 |
Messenger V4 Clear presentation of the machine
live status. |
Service Agent |
Service Agent Overview of all maintenance work on
the machine |
Special equipment |
Preparation of the headstock for the ring nozzle
Cooling water on the headstock, incl. Coolant / blown air switchover
Requirement to provide a ring nozzle additive manufacturing at the
latest |