A complete baling system is for sale, consisting of a conveyor belt with feed hopper, the baling press with bale chute and wire pulling stations, without wire. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Type HBC 80 AF Year of construction 1994, overhauled by the manufacturer Bollegraaf 2003 Operating hours 51,551 hours, as of December 2024 Number of pressed bales 613,446 pieces, as of December 2024 Main press pressing force 78 tonnes Pre-press pressing force 45 tonnes Dimensions of feed chute 1,500 x 1,100 mm (l x w) Filling volume / pressing cycle 2.9 m³ Theoretical cycle time 22 seconds Throughput capacity under operating conditions 300 - 450 m³/hour Bale dime ...

For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100  ...

Technical data baler: Manufacturer Bollegraaf Typ HBC 140 K Year of construction 2012 Working hours 18.593 hours, stand September 2024 Press power main press 140 tons Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm Capacity per cycle time 4,34 m³ Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm Driving motor 2 x 75 kW Connected load 248 kW Full load current 470 A Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 800 up to 1300 kg, depends on material and bale lenght SPS controller Telemecanique TSX Micro Operatin ...

Technical data feeding conveyor belt: Manufacturer Bollegraaf Typ HBT 1216/2000 18000 Year of construction 2015 Driving motor 5,5 kW Length feeding conveyor 18,000 mm Grade 0° Effecting width 2,000 mm Height of side wall feeding conv. 500 mm Transport dimensions 18,000 x 3,200 (2,830 mm without motor and gear) x 1,200 mm l x w x h Weight approx. 13 t Comments: Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Weingarten Excenter Press  ...

• maggiori informazioni

Pressa idraulica Pellegrini Acqua calda Area di pressatura 4000 mm x 1300 mm applicazione manuale della colla incl. Tabella di inserimento Accettazione: Vacuum - Carrello elevatore a portale SIRIO  ...

• maggiori informazioni

SERGIANI 2 - Pressa Continua da Pavimento Modello Leopida/Leomatic Tavola scorrevole 6.000 mm x 1.400 mm Pressa 5.000 mm x 1.400 mm Rulliera di scarico 4.000 mm x 1.400 mm  ...

• maggiori informazioni

HF Press Produttore Ormamacchine Pressa a nastro continua ad alta frequenza Applicazione manuale della colla incl. Tavola di posa / letto di riempimento 5000 x 1400 mm Pressa 4600 x 1400 mm Uscita rulliera 5000 mm Spessore max 200 mm del pezzo Cilindro di stampa laterale 10 Forza di pressatura 110 t Generatore RF 40 Kw Dimensione: 16000 x 3200 mm

Per un assemblaggio completamente automatico delle parti del telaio. Dimensione esterna del telaio: min. 700 x 2.500 mm max.  ...

• maggiori informazioni

Pressa adesiva pneumatica, Travi adesive con riscaldamento, regolazione della temperatura infinitamente variabile per le barre adesive inferiore e superiore, regolazione senza roba del tempo di tenuta adesivo, Potenza: 5 Kw, 380 Volt-50 Hz, Controllo a due mani SIEMENS. Accumulo di pressione tramite leve articolate, max. percorso di apertura approssimativo.30 mm