table length: 1160 mm table width: 710 mm daylight: 650 mm Control: WENZEL ME 5007 total power requirement: kW weight of the machine ca.: 800 kg dimensions of the machine ca.: m 3-D-coordinate measuring machine with METROLOG II-Software The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mm y-travel: 1600 mm z-travel: 800 mm Control: WENZEL WPC 2040/FW31.351 total power requirement: kW weight of the machine ca.: 5500 kg dimensions of the machine ca.: m Coordinate measuring m/c, software QUARTIS R12/16, Renishaw PH10Mplus The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stazione di misura della rugosità e del contorno Wenzel per alberi a gomiti Piastra di misurazione in roccia dura Lunghezza: 3670 mm Larghezza: 850 mm Tolleranza di planarità secondo DIN 876/1 Valore obiettivo 48 μm Valore effettivo 32 μm Codice articolo: 14280 Blocchi di erogazione JFA Luogo in cui si trova l'oggetto: 42859 Remscheid Altre piastre di misurazione in altre dimensioni - nuove e usate - possono essere trovate nel nostro negozio! Spese di spedizione internazionali su richiesta!

Tomografo computerizzato Produttore: Wenzel Tipo: exaCT M150 HE Anno di costruzione: 2009 Revisione generale 2017 Ore di esercizio: 200 Nuovo tubo Nuovo rilevatore Applicazioni: Tecnologia di misura e collaudo di componenti di piccole e medie dimensioni. L'exaCT M è particolarmente adatto per i controlli non distruttivi (NDT) di materie plastiche, metalli leggeri, compositi e multimateriali.

length:1600 mm width:1000 mm plate height:200 mm weight of the machine ca.:1 t dimensions of the machine ca.:1,6 x 1,0 x 1,3 m Hardstone measuring plate with support desk and 2 tailstocks ...

• maggiori informazioni

Well kept air guided measuring machine from training workshop wit Renishaw probe, hand operating device and Wenzel CNC controler WPC X 600 mm Y 800 mm Z 400 mm Max. part weight 400 kg Weight of machine appr. 3 to  ...

• maggiori informazioni

Measuring range X/Y/Z: 1000mm/1200mm/800mm, measuring head: Renishaw motorized rotary and swivel head with measuring probe model PH10M (without probe), control: Wenzel CNC controller WPC2040/3, software: Metrosoft CM 3.112. Panel: hard stone, panel dimensions X/Y/Z: 2400mm/1440mm/500mm, space requirement: 17m², weight: approx. 5500kg. Including manual control panel, PC and monitor. Documentation available. On-site inspection is possible.

Working range X/Y: 1000mm/2200mm, accuracy: 0.8 + L/450µm, max. workpiece weight: 800kg, machine dimensions X/Y: approx. 3000mm/2800mm, weight: approx. 4000kg. Including Wenzel HT 400 hand control, computer with 2 TFT monitors and Kyocera laser printer. Without measuring probe. Documentation available. On-site inspection is possible.

Year: 2006 Jahr module range: ab 0,5 mm travel -x axis: 1800 mm travel -y axis: 200 mm travel -z axis: 650 mm Control: Technical Details: • Max. Rotary table Workpiece diameter = 5 bis 400mm • Max. Rotary table load = 180kg • Axis X= 1800mm Y=200mm Z=650mm • Tailstock measuring range = 20 bis 900mm • Modul range from 0,5mm • Max. Rack length = 1200mm • 6x Probe changer inkl. 6x SP600M probe plates • Machine temperature compensation • Machine air damping • Build in 2006 • Accessories such as, driver, reference ball etc. as shown • Jaw chuck D=250mm with inside and outside jaws The following software modules are included: • TMain – Programm Management • TStylus  ...

Measuring dimensions X/Y/Z: 800mm/1000mm/700mm, max. workpiece weight: 800kg, measuring accuracy: 0.0005mm, repeatability: 0.002mm, measuring plate dimensions X/Y/Z: 1040mm/1780mm/250mm, rotary swivel head: Renishaw PH 10T Plus. The PH 10T was replaced in 2023. Documentation available. On-site inspection is possible.