Tornio superiore ZMM C 10 T.10

macchine per lavorazione dei metalli / torni

Fabbricante: ZMM

Modello:C 10 T.10

Tipo di macchina: Tornio superiore

Numero di articolo: 166388510

Quantità: 1

Data: 16.03.2025

Anno di fabbricazione: macchina nuova

Luogo: Land-at Austria

Prezzo: 102,960 EUR

Macchina in azione:

Seller-item-No.:1069-2351

: neu
: ca. 4 Monate ab Auftragse
: Bulgarien
: 102960 €
: 2048.9 €
: 800 mm
: 2000 mm
: 400 mm
: 260 mm
: 560 mm
: 560 mm
: 318 M
: 12
: 8 - 400 1/min
: 152
: 0.039 - 15 mm/U
: 0.02 - 7.5 mm/U
: 76
: 0.5 - 150 mm
: 60 - 1/5 Gänge/
: 0.125 - 37.5
: 240 - 4/5
: 410 mm
: 150 mm
: 105 mm
: 6 MK
: 225 mm
: 11 kW
: 6000 kg
Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry.
Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters.
The clamping of the pipes with two universals and stands allows the processing of long pipes.
These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities.

Drive via gearbox
Electrodynamic brake
3-axis digital display Fagor
Quick-change tool holder Amestra type C, system like Multifix including 4 holders (3x rectangular, 1 round)
2 pcs. 3-jaw chuck Bison 3295 Dm. 500 mm on both sides of the spindle,
gripping range 120-350 mm. Option: hard top jaws with gripping range 120-500 mm
2 pcs. steady rests on supports Dm. 60 - 260 mm with rollers
Rapid traverses (4)
Longitudinal stop for one position
Taper turning device
Coolant device
Full length rear splash H531606 guard
Lead and feed spindle cover
Lathe chuck protection
Tool holder protection
Leveling bolts and plates
Tailstock
Reducing sleeve for the tailstock sleeve
Mechanical movement of the tailstock with handwheel
Low voltage machine light
Operating instructions
Equipment according to ",CE", regulations

Further models with spindle bore from 155 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.


The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Condividi questa macchina su Facebook:

Inchiesta

Commerciante di macchine?

Si prega di rimettere in opzione

Inviare la domanda desiderato?

Copia a voi?

Save input data

: neu
: ca. 4 Monate ab Auftragse
: Bulgarien
: 102960 €
: 2048.9 €
: 800 mm
: 2000 mm
: 400 mm
: 260 mm
: 560 mm
: 560 mm
: 318 M
: 12
: 8 - 400 1/min
: 152
: 0.039 - 15 mm/U
: 0.02 - 7.5 mm/U
: 76
: 0.5 - 150 mm
: 60 - 1/5 Gänge/
: 0.125 - 37.5
: 240 - 4/5
: 410 mm
: 150 mm
: 105 mm
: 6 MK
: 225 mm
: 11 kW
: 6000 kg
Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry.
Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters.
The clamping of the pipes with two universals and stands allows the processing of long pipes.
These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities.

Drive via gearbox
Electrodynamic brake
3-axis digital display Fagor
Quick-change tool holder Amestra type C, system like Multifix including 4 holders (3x rectangular, 1 round)
2 pcs. 3-jaw chuck Bison 3295 Dm. 500 mm on both sides of the spindle,
gripping range 120-350 mm. Option: hard top jaws with gripping range 120-500 mm
2 pcs. steady rests on supports Dm. 60 - 260 mm with rollers
Rapid traverses (4)
Longitudinal stop for one position
Taper turning device
Coolant device
Full length rear splash H531606 guard
Lead and feed H531606 spindle cover
Lathe chuck protection
Tool holder protection
Leveling bolts and plates
Tailstock
Reducing sleeve for the tailstock sleeve
Mechanical movement of the tailstock with handwheel
Low voltage machine light
Operating instructions
Equipment according to ",CE", regulations

Further models with spindle bore from 155 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.


The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

seller offer No. resale 1069-2351
Condividi questa macchina su Facebook:
rivenditore
autorizzato

Venditore

HESSE+CO GesmbH

Signor Michael Lechner
2355 Wiener Neudorf
Austria

RESALE membro dato che 2014

  • elenco macchine (600)

Inchiesta

Commerciante di macchine?

Si prega di rimettere in opzione

Inviare la domanda desiderato?

(a tutti i concessionari per una tale macchina)

Copia a voi?

(copia della richiesta sarà inviata al vostro indirizzo email)

Save input data

(Save input data for further inquiries)

di più ZMM C 10 T.10 + similar ZMM-Modello

ZMMC 10 TMS 81850 EUR
ZMMC 10 THS 87950 EUR