Seghe a nastro MEP - VOLLAUTOMAT Shark 350 NC HS 5.0

macchine per lavorazione dei metalli / seghe / Seghe a nastro

Heinz Sanders GmbH
[ profilo del rivenditore ]

Signor J?rgen Suntrup
49779 Niederlangen
Germany

05939 940... telefono

rivenditore
autorizzato

RESALE membro dato che 2018

elenco macchine (243)

invia la richiesta

aggiungi alla lista selezionati

invia la richiesta

Numero di articolo: 165509190	Quantità: 1	Data: 15.11.2024
Anno di fabbricazione: 2017	Luogo: 49779 Niederlangen

Prezzo:
Fabbricante:	MEP - VOLLAUTOMAT
Modello:	Shark 350 NC HS 5.0
Tipo di macchina:	Seghe a nastro
Descrizione:	Seghe a nastro MEP - VOLLAUTOMAT Shark 350 NC HS 5.0 macchina usato cutting diameter: 350 mm saw band length: 4640 x 34 x 1,1 mm table height: -- mm : 350 mm : 15 - 100 m/min : 4,0 kW : 2800 kg : 2200 x 3200 x 2200 mm Fully automatic band saws with two-column guide for series cuts in particular materials that are difficult to machine and solid material. With this machine, MEP offers you a machine that is technically on the highest level and by using the highest quality materials one is not has an unbeatable, robust and torsion-resistant structure. An extreme Robust saw bow made of gray cast iron ensures the necessary stability impressive cutting results and the strong cast iron columns which the saw arch slides by means of pre-stressed linear guides take care of themselves at maximum load for the highest cutting precision. The modern Machine control (MEP NC 5.0) offers the user maximum ease of use and ensures trouble-free operation. (Check/evaluation/correction in real time) HIGHEST PERFORMANCE > The 2 operating modes (semi-automatic and automatic) make this possible efficient cutting in all conditions. > The control allows up to 100 cutting programs with each different quantities and lengths and minimizes the Programming time for frequently executed jobs. > The automatically detected start position of the saw head reduces the setting time. > The feed of the saw head via driven hydraulic cylinders Linear guides with preloaded recirculating ball bearings ensures the Reduction of mechanical vibrations during cutting and higher Stability. > The automatic alignment of the front saw blade guide head depends on the dimensions of the bars to be cut reduces the processing time. > The saw blade is tensioned by the brushless motor and is constantly controlled and automatically adjusted to the set minimum value. EXTREMELY FLEXIBLE > The feed system with 600 mm stroke is repeatable and cuts all lengths. > The vertical pair of rollers allows any type of bar or bundle that to be fed, to hold and to align. > The vector converter for stepless adjustment of the blade speed from 15 to 100 m/min allows cutting of any material. > The motorized chip conveyor can be positioned to the right or left of the cutting area to be assembled. CHARACTERISTICS: Fully automatic control - NC 5.0 -Innovative (Windows CE based) touch screen control with additional software Touch buttons for common operating functions -USB port -Joystick for manual control of the axes (X-Y) -Controlled head descent with automatic compensation via an in cylinder mounted servo valve, constant monitoring of the preselected torque 4 and with precise feed adjustment in millimeters/minute 5 -Setting / pre-selection of the stepless belt speed in m/min. -Saw band tension with band tension control and indication on the display by means electronic converter -Automatic detection of the beginning of the cut -Large 7 color touch screen to display and select all Machine functions and parameters and programming in a matter of seconds. Advertisement detailed alarm and error messages -Numerous special functions including different lengths + quantities (10 Run programs) as a sequence, clean cut, step execution and much more. -Stable, torsion-resistant and low-vibration cast steel saw H41151851 frame -Carbide band guides for maximum cutting precision, hinged for easy saw blade change -Largely dimensioned deflection pulleys, adjustable, made of cast steel integrated belt circulation control -Material vise and support specially designed for cuts to 0° with minimum residual piece of only 70 mm -Adjustable material guide for short sections -Frequency converter for stepless drive of the tool -X axis (material feed) via ball screw -Automatic saw band tensioning with band tension control and correction -Powered chip conveyor, right or left on -installable on the machine -Coolant gun to clean the machine -Driven (motorized) chip removal brush for cleaning the saw blade -Machine is prepared for all options (see price list). (Cable, software etc.) Standard equipment: -Shark 350 NC/CNC HS is equipped with scraper belt chip conveyor as standard. Mounting left or right. -Bi-metal saw band -Tool set -Detailed operating instructions, maintenance manual, wiring diagrams and exploded views -Mounting adapter for feed roller conveyor -Material chute for discharging short sections -Entrance possibility for forklift / pallet truck transport Optional equipment: - LubeCut minimum quantity lubrication system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. seller offer No. resale 1125-3170100
Macchina in azione:	Sì
Seller-item-No.:	1125-3170100

Condividi questa macchina su Facebook:

Seghe a nastro MEP - VOLLAUTOMAT Shark 350 NC HS 5.0

Inchiesta

di più MEP - VOLLAUTOMAT Shark 350 NC HS 5.0 + similar MEP - VOLLAUTOMAT-Modello