We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree

Injection moulding mac KRAUSS MAFFEI KM 150-520 C2

macchine per lavorazione della plastica / macchine a iniezione
chiedi più foto
logo dealer

Exapro S.A.S
[ profilo del rivenditore ]


49400 Saumur
France

rivenditore
autorizzato
verified user

RESALE membro dato che 2023

  • elenco macchine (4979)
invia la richiesta
aggiungi alla lista selezionati
invia la richiesta
Numero di articolo: 166039723 Quantità: 1 Data: 22.12.2024
Anno di fabbricazione: 2005 Luogo: Land-PL Polonia
Prezzo: 19,500 EUR
Fabbricante: KRAUSS MAFFEI
Modello: KM 150-520 C2
Tipo di macchina: Injection moulding mac
Descrizione: Injection moulding mac KRAUSS MAFFEI KM 150-520 C2

macchina usato

Fully hydraulic closing system, MC 4 control system with color monitor, integrated control panel and built-in disc drive.

1 complete plasticizing system for thermoplastics with a screw diameter of 45 mm

- Levels for the foundation of the Nolato machine
- Hydraulic blockade of reverse rotation of the auger
- Hydraulic auger drive with standard speed
- SVO open nozzle in 2-piece design (nozzle body with screw-in nozzle).
- A device for sorting good and defective parts.
Pneumatic pendulum. Pendulum speed approx. 3 sec. Free-standing device under the machines discharge shaft. Including electrical standard connector and software (Pos. 42.42).
- Single pneumatic valve on the movable mold clamping plate for the blowing function (1 piece of 3/2 separating valve with 1 magnetic coil). Control to choose between road/time or time/time. Possibility to manually set the flow using 1 throttle on the valve outlet. Connection size ¼”
- Door protecting the ejector chamber from the service side, with the possibility of opening
- Mechanical standard joint according to Euromap 18 for handling device on fixed mold clamping plate (with console for KM max. 300 C)
- Ejector force increased on entry/exit from 22 kN/10 kN to 40.0 kN/28.0 kN with reduced ejector speed.
- Control of the rear position of the hydraulic ejector and the ejector plate in the mold
- Chromed columns of the closing unit and the injection unit
- Oil cooler with increased capacity for inlet water temperature up to 31°C at 4 - 6 bar inlet water pressure at the connection points
- Adjustable stagnation pressure for hard PVC processing
- Hydraulic 1-fold control of the core on the movable mold clamping plate on the opposite side of the service. Connection size ½” internal thread (speed and pressure adjustable on the monitor screen). Plug layout according to Euromap 13 (Han 16 A)
- 4-fold rotameter without thermometers and without solenoid valves
- Hydraulic pump motor with class F insulation
- Potential-free signal for HAN 3 A dye dispenser.
- The start of the pressure depends on the hydraulic pressure
- Additional software for continuous logging of events (Logbuch) and viewing them by scrolling the screen backwards (max. 10,000 notes) in the range of: - changes of machine setting data; - alarm reports and acknowledgments; - enabling or disabling the control with date, time and current cycle, and registering a password (standard) or a magnetic card (Pos. 89.6711); can be entered using a printer (Pos. 89.972 or Pos. 89.9721). Additional possibility of statistical analysis on the monitor with graphical presentation of alarms in semi-automatic and automatic operation of the machine.
- Quality control package:
process control (cycles - actual values) by specifying the tolerance range, actual value indicator, actual value memory - with the possibility of printing
- Cycle time analysis package:
an indicator of individual times and total cycle time for the last current cycle and any selected cycle. Graphical presentation of successive cycles or individual times running in parallel.
- Recording cycle parameters in DOS format:
The actual values of each cycle are stored on a separate diskette in DOS. Data analysis on an external PC in a standard program, e.g. EXCEL
- Standard E41261673 connector for connecting an alphanumeric keyboard AT type MF2 for free text input of additional production information on 3 sides of the screen.
- TFT color monitor
- Set of set and actual value curves for the following parameters: injection speed, injection pressure, pressure, stagnation pressure and number of screw revolutions
- PV-regulation of the injection speed, clamping pressure, stagnation pressure and start of clamping pressure depending on the hydraulic pressure

Equipment of the LR 100 robot:
Robot LR 100 MANUFACTURER: KRAUSS - MAFFEI

- Krauss-Maffei LR 100 linear robot
load capacity 10 kg
- (gripper + drives + parts)
the side of storage opposite to the service
axles:
stroke from form (X axis)
- 550 mm, servo motor
vertical stroke (Y axis) with engine brake
- 1200 mm, servo motor
transverse stroke (Z axis)
- 1500 mm, servo motor
foldable axle (C axis for putting down)
- 0-90°, pneumatic
- torque Md = 30 Nm
Position measurement with an encoder
- Mechanical joint according to EUROMAP 18
- Robot cover
- AC pneumatic axis consisting of:
- C axis (rotation around the Z axis between the Y axis and the gripper) rotation 0 and 90 °, torque Md = 30 Nm
- with A axis of rotation (rotation around the X axis between the Y axis and the gripper) 3 positions: 0 - 90° and 180° torque Md = 3 Nm.
Delivery instead of pneumatic C axis, ZE R31.2501.
seller offer No. resale P230831058
Seller-item-No.: P230831058
Condividi questa macchina su Facebook:

Inchiesta

Commerciante di macchine?

Si prega di rimettere in opzione

Inviare la domanda desiderato?

(a tutti i concessionari per una tale macchina)

Copia a voi?

(copia della richiesta sarà inviata al vostro indirizzo email)

Save input data

(Save input data for further inquiries)

di più Krauss Maffei KM 150-520 C2 + similar Krauss Maffei-Modello

2000 KRAUSS MAFFEIKM 150-1000 C1
2011 KRAUSS MAFFEILRX-S 150-0956 8900 EUR
1988 KRAUSS MAFFEI150
1998 KRAUSS MAFFEI150-700 C1 9500 EUR
1997 KRAUSS MAFFEIKM 150-1000 C1
1997 KRAUSS MAFFEIKM 150-700/C1
2000 KRAUSS MAFFEI150-1000 C1

Prezzo: sold Krauss Maffei KM 150-520 C2 + simili Krauss Maffei-Modello

1993 KRAUSS MAFFEIKM 150/620 B1 MC 3 14000 EUR [Nov 2011]
1996 KRAUSS MAFFEIC1 150 5000 GBG [Apr 2015]
2003 KRAUSS MAFFEIELTEC 150/700/E 38000 EUR [Nov 2011]
1991 KRAUSS MAFFEIKM 150-900 B2 5600 EUR [Feb 2019]
1992 KRAUSS MAFFEIKM 150-620 B1 MC 3 12000 EUR [Nov 2011]
2003 KRAUSS MAFFEIKM 150- 1000 C2 11700 EUR [Aug 2022]
1987 KRAUSS MAFFEIKM 150/460 AB MC 3 12000 EUR [Nov 2011]
1992 KRAUSS MAFFEIKM 150-620 B 1 10000 EUR [Dec 2010]