: 28 min. Punching force: 110 to : 40x20 mm flat steel: 600x15 oder 400x20 mm L-beam 90°: 160x160x16 mm L-beam 45°: 70x70x7 mm : 50 mm square edge steel: 50 mm : 13 mm throat: 300 mm Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for bar cutter - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 40 mm diameter - Rectangle notch compl. with hold downs - Complete knife set below for rectangular notching - Upper tool for rectangular notching - Support table for flat material - Punching table with stop - Notch with stop The data for this ad was created with ModulMWS - the software s ...

: 10 mm Punching force: 55 to : 40x10 mm flat steel: 300x15 oder 200x20 mm L-beam 90°: 120x120x10 mm L-beam 45°: 70x70x7 mm : 40 mm square edge steel: 40 mm : 37 /min. throat: 250 mm weight of the machine ca.: 1.600 kg Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for bar cutter - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 40 mm diameter - Rectangle notch compl. with hold downs - Complete knife set below for rectangular notching - Upper tool for rectangular notching - Support table for flat material - Punching table with stop - Notch with stop The data for this ad was cr ...

La macchina idraulica per siderurgia GEKA HYDRACROP 55/S costruita nel 2008 in Spagna, è una macchina altamente versatile e multifunzionale che consente un'ampia gamma di lavorazioni del pezzo. La sua struttura rigida e robusta è dotata di 5 stazioni di lavoro, progettate per la punzonatura precisa di fori e angoli, nonché per la tranciatura di barre piatte, angolari e barre piene. Ogni stazione di lavoro è controllata da due cilindri idraulici, che offrono la possibilità di lavorare in modo indipendente o in parallelo su due stazioni contemporaneamente. La macchina per la lavorazione del ferro GEKA HYD 55/S pesa 1390 kg. Dati tecnici della macchina per la lavorazione del ferro a 2 c ...

Num. Inv. : 7366 Tipo: Hydracrop 70- SD Produttore: GEKA Creato: 1993 Parametri: Potenza assorbita: 9 kW Collo d'impatto: 500 mm Peso della macchina: 2400 kg Dimensioni: 1300 x 2100 x 1800 mm Attrezzatura: 2 pedali  ...

• maggiori informazioni

Punzonatrice GEKA Hydracrop 70-SD  ...

• maggiori informazioni

Profilato combinato cesoia e punzone in acciaio GEKA tipo HYD 80 / Hydracrop 80/A Masch. No. 9566 Anno di costruzione circa 2000 Forza di punzonatura 80 ton. Sporgenza 300 mm Punzonatura fino a 40 mm in lamiera da 14 mm Cesoie piatte per materiali 450 x 15 mm Cesoie angolari in acciaio 130 x 130 x 13 mm Cesoie a 4 taglienti 45 x 45 mm Cesoie rotonde per materiali 45 mm Clinker rettangolare fino a 12 mm Potenza motore 5,5 kW Collegamento alla rete 400 volt, 50 Hz stop con. Rilascio della corsa 500 mm - Piano di lavoro con arresto per il dispositivo di foratura 550 x 380 mm - Altezza di lavoro del dispositivo di foratura 1100 mm - Piano di lavoro con arresto per il clinker rettangolare 550 x 4 ...

IRON WORKER (Universal Punching Shear) (Punching capacity) Punching capacity 70 Tons Diameter 28 x 20mm Thickness (Diameter 28 x 20mm thickness) Max cutting thickness in plate 20mm (Max cutting thickness in plate 20mm) Angle cutting up to 130x130x130x13 at 90°. Angle cutting up to 70x70x7 at 45°.

puncher: 50.0 t square edge steel: 40.0 x 40.0 mm round bar steel: 40.0 mm L-beam: 120 x 120 x 10 mm hole punching press: capacity (dia. x thick.): Ø 28.0 x 13.0 mm shear: flat material: 300 x 15 / 200 x 20 mm throat: 250 mm work stroke: 60.0 mm work height max.: 1085 mm total power requirement: 4.0 kW weight: 1320 kg range L-W-H: 1600 x 800 x 1680 mm current new price approx. 19.000 euros special price on request Equipment: - electro-hydraulic profile steel shears with 4x work stations flat steel shears profile steel shears hole punch notching station - driven by two hydraulic cylinders - stepless stroke adjustment - support table at hole punching & notching station - material stripp ...

This GEKA Hydracrop 80A sheet metal machine was manufactured in 2010. It features a punching force of 80 tons and can handle materials up to 14 mm thick. The machine includes shears for flat, angle, square, and round materials, enhancing its versatility. Ideal for operations requiring precision in sheet metal work. Contact us for more information about this machine.

: neu : ca. 12 - 14 Wochen ab Auf : Spanien : 110 to : 4-30 mm punching unit with hydraulic stripper hydraulic material clamps X- und Y- axis on ballscrews,each with servo motor CNC control Omron Flash memory Touchscreen OPTIONAL EQUIPMENT: TRIPLE PUNCHING UNIT: 31/31/31 MM € 4.500,- central punch: 100 % of punching force max. Dm. 31 mm max. thickness 20 mm max. Dm./thickness 31/20 mm lateral punches 75 % of punching force max. Dm. 31 mm max. thickness 20 mm max. Dm./thickness 31/18 mm TRIPLE PUNCHING UNIT: 31/40/31 MM € 5.100,- central punch: 100 % of punching force max. Dm. 40 mm max. thickness 20 mm max. Dm./thickness 40/20 mm lateral punches 60 % of punching force max. Dm. 31 mm ma ...