macchine per lavorazione dei metalli / fresatrici / Fresatrici verticali a mensola
Fabbricante: DMG MORI
Modello:HSC 70 linear
Tipo di macchina: Fresatrici verticali a mensola
Numero di articolo: 166192446
Quantità: 1
Data: 09.01.2025
Luogo:
Germania
Prezzo:
Seller-item-No.:055065
| General | |
| Precision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-control Siemens 840D sl Operate | |
| Working area 1 | |
| Longitudinal | 650 mm |
| Cross | 600 mm |
| Vertical | 380 mm |
| Technical Data | |
| Feed rate longitudinal/transverse/vertical | 1-80000/1-80000/1-80000 mm/min |
| Spindle taper | HSK-A 63 |
| Rapid traverse longitudinal/transverse/vertical | 80/80/80 m/min |
| Tool changer | |
| Type of magazine | Chain |
| Type of gripper | Double gripper |
| Number of tools | 120 |
| Floor space/Weight | |
| Dimensions (L x W x H) | 7,28 x 6,63 x 3 m |
| Weight approx. | 9600 Kg |
| Rigid table | Rigid table clamping area 850 x 600 mm // 33,46 x 23,62 inch loading weight max. 700 kg // 1543,23 lbs |
| Spindle speed up to 28,000rpm Shaft Cooling | Spindle speed 20 up to 28,000 rpm within shaft cooling inclusive MPC Machine Protection Control (differently from standard) |
| Drive power (100% DC) 20 kW | |
| Drive power (40% DC) 30 kW | |
| Speed range 20 - 28000 rpm | |
| Spindle taper HSK-A 63 | |
| Chain-type tool magazine 120 pockets | Werkzeugmagazin 120 Plätze Kettenmagazin mit Doppelgreifer |
| Infrared measuring probe TS 649 | Infrared touch probe make Heidenhain TS 649 |
| Tool Measuring Blum Laser | Tool measuring Blum Laser Non-Contact optical tool measuring system including calibration D5152871 tool |
| Signal lamp 4-colour | Signal lamp 4-colour Red: general error Yellow: intervention necessary Green: automatic mode Blue: set-up mode |
| Production package 980l ICS coolant tempering | Production package coolant tempered with internal coolant supply (ICS) Special coolant temperature control for more kinematic stability. Including paperband filter, coolant tempering and stirring device, swarf conveyor (scraper type) 40 bar/23 l/min/ 980 |
| Air blast through spindle centre dry | Air blast through spindle centre (dry) activated by M function, (up 28.000rpm and higher) |
| High-Speed-Settings | High-Speed-Settings Selection of the optimal milling mode for the next machining-step. |
| Operation mode 4 | Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in. |
| Safety glass at operators door and side panel | Laminated safety glass at operators door and side panel |
| Special equipment | Preparation PH 150-8 - automatic lift door at the front cabin side - 4-channel media feed to theStarr table - standard electrical interfaceProfibus with DNC extension of DMG MORI Systems pneumatic control u. Monitoring the zero point clamping syst |
| DMG MORI | HSC 55 linear | ||
| DMG MORI | HSC 55 linear | ||
| DMG MORI | HSC 75 linear | ||
| DMG MORI | HSC 75 linear | ||
| DMG MORI | HSC 55 linear | ||
| 2011 | DMG MORI | HSC 55 linear | |
| 2006 | DMG MORI | Ultrasonic 20 linear SAUER | |
| DMG MORI | DMC 75 V linear | ||
| DMG MORI | DMU 60 eVo (linear) | ||
| DMG MORI | DMU 50 eVo linear |
| DMG MORI | CTX 420 linear V3 | 46900 EUR | [Mar 2021] |
