We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree

Fresatrici orizzontali DMG MORI DMU 85 H monoBLOCK

macchine per lavorazione dei metalli / fresatrici / Fresatrici orizzontali

Fabbricante: DMG MORI

Modello:DMU 85 H monoBLOCK

Tipo di macchina: Fresatrici orizzontali

Numero di articolo: 166192458

Quantità: 1

Data: 09.01.2025

Luogo: Land-de Germania

Prezzo:


Seller-item-No.:064092


Technical Data
Feed rate longitudinal/transverse/vertical 60000/60000/60000 mm/min
Rapid traverse longitudinal/transverse/vertical 60/60/60 m/min
General
Horizontal 5-axis universal machining centre; Control: CELOS with Siemens 840D sl Operate
Working area 1
Longitudinal 850 mm
Cross 900 mm
Vertical 1150 mm


NC swivel rotary table integrated in rigid table Type of Measuring system
Table surface 1000 x 850 (Ø 850) mm
5. Axes (swivelling range) +120 / -120 (AC) degree
4. Axes (swivelling range) 360 x 0,001 degree
Distance between T-Slots 63 mm
Number of Slots 9
Slot width 14 mm
Maximum load (table centre) 1000 Kg
Centre bore 50 mm
Cabine Full protection cabin
Motor spindle 20,000 rpm Motor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)
Taper cleaning brushes Taper cleaning unit with rotating brushes for spindle taper HSK
Kinematics axis A / C for swivel rotary table Axis kinematics A/C for swivel rotary table Axis designation swivel axis: A Axis designation rotary axis: C 0° position A axis: table vertical Rotary axis setting: modulo Machine datum: In table center on the table top Not compatible with monoBLOCK kinem
Tool magazine, wheel, 183 pockets HSK-A63 Tool magazine wheel magazine (2 wheels) with 183 tool pockets HSK-A63 or optionally chosen spindle taper
Operation panel for loading station tool magazine Control panel for loading station tool magazine with TFT screen 15” Input on touch screen Windows 10 IoT Enterprise LTSB - 64 bit
ICS unit frequency controlled 80 bar 980 l tank Internal coolant supply unit: 980 l / 259 gallon, paper band filter Internal coolant supply, frequency controlled 10 bar/37l/min - 80 bar/31 l/min - 145 psi/9.7 gpm - 1,160 psi/8.2 gpm through spindle centre (AD) External coolant supply 4 bar / 58 psi - 4
Rotating clear-view window Rotating clear-view window cabin door
Split-able chip conveyor Separable chip conveyor Less space required behind the machine for pulling out the chip conveyor in case of maintenance
Interface for Oil and emulsion mist separator Interface mechanical and elektrical for oil- and emulsion mist separator
Cooling Cooling by air blast through spindle centre, selection with M function
Control cabinet lighting with power outlet Control cabinet lighting with power outlet Lighting in the control cabinet with motion sensor power outlet 230V - 10A (Type F - Schuko) Other types of outlet on request Connected before the main switch (for this the customer must provide a loadable neutra
Infrared measuring probe Heidenhain Infrared measuring probe Type Heidenhain TS 460 Tool taper HSK-A 63
Tool measuring in machining area Blum Laser Tool measuring in machining area Blum Laser DIGILOG Tool length and diameter measurement vertically
Tool breakage control mechanical Tool breakage control mechanical version
3D quickSET extension package 3D quickSET extension package for each further machine: software / password (only together with option measuring probe and existing set of measuring tools)
Sensorpaket i4.0 Sensor package i4.0: MPC Machine Protection Control SGS Spindle Growth Sensor ICS flow sensor
rotoLENS - working envelope camera rotoLENS - Camera with rotating lens integrated in the machine roof Visualization via CELOS (delayed) and HDMI (real time) Digital zoom and recording function
rotoLENS - milling head camera rotoLENS - Camera with rotating lens integrated in the milling head Visualization via CELOS and HDMI Digital zoom and recording function
proTIME proTIME Visualisation of the remaining runtime, remaining workpieces and the machine state
Automation interface PH Cell 2000 Automation D5152871 interface for PH Cell 2000 Profinet interface via M65 NC swivel rotary table with pallet carrier Automatically operated front door Automation software interface
Bore pattern pallet 630 x 630 mm - PH Cell / LPP Cast iron pallet 630 x 630 mm Bore pattern M12, grid 100 mm / 3.94 in Without centering bush / locking bush / without pallet claw
Operation mode 4 Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area Release after completed check list
Package increased accuracy Package increased accuracy Advanced cooling measures, Thermoshield Coolant tempering control Component selection
Efficient Production Package Efficient Production Package Solutions for a safe prozess and for the efficient use of important machining steps
1 Additional set of documents in paper form 1 additional set of documents: operating and programming instructions in paper form
Digital Manufacturing Package Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
Messenger V4 The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop
Service Agent Service Agent Overview of all maintenance work on the machine
PH CELL 2000 PH Cell 2000 pallet loading and unloading system - Handling system with double pallet fork - Transfer weight max. 1,000 kg (pallet with load) - Max. workpiece diameter d 840 mm - Storage shelf with 2 levels for a total of up to 12 pallets in the system
Enlargement PH Cell 2000 variant d1,100 mm Enlargement of the shelf storage and setup station to variant d1.100 for max. workpiece diameter of 1,100 mm Increase in the maximum transfer weight 2,000 kg / 4,409 Ibs
Additional automation control panel PH Cell 2000 Additional automation control panel at the PH Cell 2000 set-up station
5 x Bore pattern pallet 630 x 630 mm 5 x Cast iron pallet 630 x 630 mm Bore pattern M12, grid 100 mm / 3.94 in Without centering bush / locking bush /
Condividi questa macchina su Facebook:

Inchiesta

Commerciante di macchine?

Si prega di rimettere in opzione

Inviare la domanda desiderato?

Copia a voi?

Save input data


Technical Data
Feed rate longitudinal/transverse/vertical 60000/60000/60000 mm/min
Rapid traverse longitudinal/transverse/vertical 60/60/60 m/min
General
Horizontal 5-axis universal machining centre; Control: CELOS with Siemens 840D sl Operate
Working area 1
Longitudinal 850 mm
Cross 900 mm
Vertical 1150 mm


NC swivel rotary table integrated in rigid table Type of Measuring system
Table surface 1000 x 850 (Ø 850) mm
5. Axes (swivelling range) +120 / -120 (AC) degree
4. Axes (swivelling range) 360 x 0,001 degree
Distance between T-Slots 63 mm
Number of Slots 9
Slot width 14 mm
Maximum load (table centre) 1000 Kg
Centre bore 50 mm
Cabine Full protection cabin
Motor spindle 20,000 rpm Motor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)
Taper cleaning brushes Taper cleaning unit with rotating brushes for spindle taper HSK
Kinematics axis A / C for swivel rotary table Axis kinematics A/C for swivel rotary table Axis designation swivel axis: A Axis designation rotary axis: C 0° position A axis: table vertical Rotary axis setting: modulo Machine datum: In table center on the table top Not compatible with monoBLOCK kinem
Tool magazine, wheel, 183 pockets HSK-A63 Tool magazine wheel magazine (2 wheels) with 183 tool pockets HSK-A63 or optionally chosen spindle taper
Operation panel for loading station tool magazine Control panel for loading station tool magazine with TFT screen 15” Input on touch screen Windows 10 IoT Enterprise LTSB - 64 bit
ICS unit frequency controlled 80 bar 980 l tank Internal coolant supply unit: 980 l / 259 gallon, paper band filter Internal coolant supply, frequency controlled 10 bar/37l/min - 80 bar/31 l/min - 145 psi/9.7 gpm - 1,160 psi/8.2 gpm through spindle centre (AD) External coolant supply 4 bar / 58 psi - 4
Rotating clear-view window Rotating clear-view window cabin door
Split-able chip conveyor Separable chip conveyor Less space required behind the machine for pulling out the chip conveyor in case of maintenance
Interface for Oil and emulsion mist separator Interface mechanical and elektrical for oil- and emulsion mist separator
Cooling Cooling by air blast through spindle centre, selection with M function
Control cabinet lighting with power outlet Control cabinet lighting with power outlet Lighting in the control cabinet with motion sensor power outlet 230V - 10A (Type F - Schuko) Other types of outlet on request Connected before the main switch (for this the customer must provide a loadable neutra
Infrared measuring probe Heidenhain Infrared measuring probe Type Heidenhain TS 460 Tool taper HSK-A 63
Tool measuring in machining area Blum Laser Tool measuring in machining area Blum Laser DIGILOG Tool length and diameter measurement vertically
Tool breakage control mechanical Tool breakage control mechanical version
3D quickSET extension package 3D quickSET extension package for each further machine: software / password (only together with option measuring probe and existing set of measuring tools)
Sensorpaket i4.0 Sensor package i4.0: MPC Machine Protection Control SGS Spindle Growth Sensor ICS flow sensor
rotoLENS - working envelope camera rotoLENS - Camera with rotating lens integrated in the machine roof Visualization via CELOS (delayed) and HDMI (real time) Digital zoom and recording function
rotoLENS - milling head camera rotoLENS - Camera with rotating lens integrated in the milling head Visualization via CELOS and HDMI Digital zoom and recording function
proTIME proTIME Visualisation of the remaining runtime, remaining workpieces and the machine state
Automation interface PH Cell 2000 Automation D5152871 interface for PH Cell D5152871 2000 Profinet interface via M65 NC swivel rotary table with pallet carrier Automatically operated front door Automation software interface
Bore pattern pallet 630 x 630 mm - PH Cell / LPP Cast iron pallet 630 x 630 mm Bore pattern M12, grid 100 mm / 3.94 in Without centering bush / locking bush / without pallet claw
Operation mode 4 Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area Release after completed check list
Package increased accuracy Package increased accuracy Advanced cooling measures, Thermoshield Coolant tempering control Component selection
Efficient Production Package Efficient Production Package Solutions for a safe prozess and for the efficient use of important machining steps
1 Additional set of documents in paper form 1 additional set of documents: operating and programming instructions in paper form
Digital Manufacturing Package Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
Messenger V4 The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop
Service Agent Service Agent Overview of all maintenance work on the machine
PH CELL 2000 PH Cell 2000 pallet loading and unloading system - Handling system with double pallet fork - Transfer weight max. 1,000 kg (pallet with load) - Max. workpiece diameter d 840 mm - Storage shelf with 2 levels for a total of up to 12 pallets in the system
Enlargement PH Cell 2000 variant d1,100 mm Enlargement of the shelf storage and setup station to variant d1.100 for max. workpiece diameter of 1,100 mm Increase in the maximum transfer weight 2,000 kg / 4,409 Ibs
Additional automation control panel PH Cell 2000 Additional automation control panel at the PH Cell 2000 set-up station
5 x Bore pattern pallet 630 x 630 mm 5 x Cast iron pallet 630 x 630 mm Bore pattern M12, grid 100 mm / 3.94 in Without centering bush / locking bush /

seller offer No. resale 064092
Condividi questa macchina su Facebook:
TOP
Seller
rivenditore
autorizzato

Verkäufer

logo dealer

DMG MORI Used Machines GmbH

Signora Kerstin Bauer
82538 Geretsried
Germany

RESALE membro dato che 2019


verified user
[ profilo del rivenditore ]
  • elenco macchine (212)
invia la richiesta
invia la richiesta

Inchiesta

Commerciante di macchine?

Si prega di rimettere in opzione

Inviare la domanda desiderato?

(a tutti i concessionari per una tale macchina)

Copia a voi?

(copia della richiesta sarà inviata al vostro indirizzo email)

Save input data

(Save input data for further inquiries)

di più DMG MORI DMU 85 H monoBLOCK + similar DMG MORI-Modello

DMG MORIDMU 75 monoBLOCK
DMG MORIDMU 65 monoBLOCK
DMG MORIDMU 65 monoBLOCK
DMG MORIDMU 65 monoBLOCK
DMG MORIDMU 65 monoBLOCK
DMG MORIDMU 75 monoBLOCK
DMG MORIDMU 65 monoBLOCK
DMG MORIDMU 65 H monoBLOCK
DMG MORIDMU 65 H monoBLOCK
2019 DMG MORIDMU 95 monoBLOCK

Prezzo: sold DMG MORI DMU 85 H monoBLOCK + simili DMG MORI-Modello

2010 DMG MORIDMU 40 MONOBLOCK 115000 EUR [Nov 2019]
2015 DMG MORIDMU 50 125000 EUR [Jan 2019]