| Excentric turning and milling
operation |
Excentric turning and milling operation
(only with Siemens control) |
| 5-axis simultaneus machining |
5-axis simultaneous machining |
| Interpolation turning |
Turning-recessing cycle Manufacture of simple
sealing Surfaces and grooves using turn/mill centers |
| Counter spindle centre |
Complete machining of shaft components without
process interruptions on turn/mill centers with counter spindle. Cycle
for automatic exchange of a center into the counter spindle and back
into the tool magazine. The centre is not included in the
delivery |
| Technologie cycle alternating speed |
Technology cycle for the application of an
alternating speed for vibration sensitive set-ups (Only in conjunction
with Siemens control) |
| Tool sort cykle |
Order of the tools in the chain magazine according
to the respective call in editing program. Time-optimized sort in
chain magazine by using the shuttle instead of the spindle. No
relocation of multitools. |
| Y-Axis Parting |
Technology cycle to parting off the workpiece by
the Y-axis to achieve significantly higher feed, more process
stability and less material loss. This option contains the technology
cycle with the corresponding input mask to simplify the operation
and |
| Gear Broaching |
Technology cycle for pushing internal and
external gear teeth on components with single-tooth or multi-tooth
shaping tools. The workpiece, the tool and the process parameters can
be specified via an operating mask by the user. Important settings
of |
| Main spindle ISM 102 |
Main spindle as integrated spindle motor ISM 102
-drive power 28/37 KW (37.5/49.5 hp) (100/40% d.c.) -torgue 600/700
Nm (442.56/567.95 lbxft) (100/40% d.c.) -speed range 20-4000 rpm
-partially hollow clamping device (hydr.) inner dia of draw tube 104
m |
| Hollow clamping attachment, Ø 104
mm |
Hydraulic hollow clamping attachment dia. 104 mm
(4.09 inch) Pullforce 94 kN (21.132,04 lbf) at pmax 40 bar (580,151
psi) n max. = 3600 min-¹ |
| Chuck rinsing device, mainspindle |
Chuck rinsing device for main spindle,
outside |
| Chuck rinsing device, subspindle |
Chuck rinsing device for subspindle, outside |
| Dynamic two-pressure clamping at the
control, MS |
Dynamic two-pressure clamping at the control for
the main spindle The clamping pressure can be specified by NC
program |
| Dyn. two-pressure clamping, motor-adj.
valves CS |
Dynamic two-pressure clamping for the counter
spindle with motor-adjustable valves The clamping pressure can be
specified by the NC program |
| Tailstock function for counter
spindle |
Tailstock function for the counter spindle,
mechatronic control of the supporting force, selectable per program
Thrust force 250-600 daN, CTX beta / CTX beta TC. Thrust force
250-1200 daN, CTX gamma TC |
| Counter spindle ISM 76 |
Counter spindle as integrated spindle motor ISM 76
synchronous (instead of tailstock) - Drive power 25/32 kW
(S1-100%d.c. / S3-40%d.c.) - Torque 280/360 Nm (S1-100%d.c. /
S3-40%d.c.) - Speed range 0-5000 rpm - Partial hollow clamping
(hydraulic) - D |
| Machine preparation for fine metal
chips |
Machine and cooling unit preparation for fine
metal chips consisting of: - Modified quick suctioning pump on chip
conveyor - Presetted movement of band filter - Bigger chip tank (cart)
- Removal of plug-type strainer out of chip conveyor (Only in
conn |
| Extension of the discharge chute about
300 mm |
Extension of the discharge chute at the chip
conveyor about 300 mm |
| BFU 8/80 bar, freq. con., 980 l,
cooler |
Compact coolant system, consisting of: - coolant
tank, 980 litre - 8 bar/80 litre/min and 80 bar/11 litre/min
(theoretical D41252871 pump performance) with frequency-controlled
pumps programmable via M- and H-functions coolant supply
turning/milling |
| Hinged type chip conveyor |
Hinged typ chip conveyor incl. coolant tank and
coolant pump, 6 bar (87 psi)/20 litre/min |
| Renishaw Powerprobe Reporter App for
CELOS |
Renishaw Powerprobe Reporter App Easy monitoring
of geometrical tolerances |
| Workpiece touch probe RMP40,
Renishaw |
Workpiece touch probe RMP40, Renishaw -
Interchangeable in turning/milling spindle - Probe reception and
tracer point with data transfer between probe and receiver by
radio signals - Incl. measuring cycle package Inspection Plus Notes:
- Custom meas |
| Calibration device RMP40, Renishaw |
Calibration device for the workpiece touch probe
RMP40 from Renishaw Scope: magnetic base holder and a polished ground
calibration ball (Ø 25 mm), packed in a carrying case Note: Only in
connection with workpiece touch probe RMP40 |
| Chain magazine for 80 tools HSK 63A |
Tool magazine, 80-fold chain magazine instead of
24-fold disc magazine, tool reception HSK-63A DIN 69893 -only with
Siemens control- |
| Automatic actuation of sliding cover,
electrical |
Automatic actuation of sliding cover, electrical.
(Remark: option B-L7250, automatic loading hatch is not possible) |
| Tool pre-setting probe,make RENISHAW |
Tool pre-setting probe, make Renishaw positioned
over the spindle axes, composed by: - Laser measuring device NC4 with
measuring and calibration software for measuring in diametre- length
and wear of the multi-insert boring and milling tools; -
Measuring |
| Sensor package Industry 4.0 |
Sensor package Industry 4.0 for holistic condition
monitoring with visualization in Condition Analyser App and analysis
of the machine and the machining processes (Attention: The DMG Mori
Condition Analyser App is not part of this option) |
| Electrical interface for Robo2Go |
Electrical interface standard Profibus for Robo2Go
(Only at Siemens control) Incl. - Additional compressed air supply -
Additional Ethernet interface - Power supply of the robot by the
machine - User interface integrated into CELOS (with CELOS 3
as |
| Package for tropical climate (ambient
temp.50ºC) |
Package for tropical climate for ambient
temperature of max. 50ºC, consisting of cooling system for control
cabinet (until 50º) and machine |
| Window rinsing of the security
window |
Window cleaning of the security window of the
working area door by compressed air (Remark: The employment of coolant
can limited the view on the workpiece at machining) |
| Digital Manufacturing Package |
Digital Manufacturing Package (1) IoTconnector
Allows the use of the Online services from DMG MORI (2) Machine Data
Connector (MDC) Standardized machine data interface Protocols: OPCUA,
MTConnect, MQTT (3) NETservice Qualified support through
internet-b |
| Service Agent |
Service Agent Overview of all maintenance work on
the machine |