| Technologie cycle alternating
speed |
Technology cycle for the application of an
alternating speed for vibration sensitive set-ups (Only in conjunction
with Siemens control) |
| Y-Axis Parting |
Technology cycle to parting off the workpiece by
the Y-axis to achieve significantly higher feed, more process
stability and less material loss. This option contains the technology
cycle with the corresponding input mask to simplify the operation
and |
| Easy Tool Monitor 2.0 |
Tool breakage monitoring Easy Tool Monitor 2.0
Simplified holistic view of the actual state of the tools in Side
screen of CELOS Setting of one monitoring limit for each tool selected
from the tool list. Easy teaching function to measure monitoring
limit |
| Chuck rinsing device, outside, main
spindle |
Chuck rinsing device for main spindle,
outside |
| Chuck rinsing device, outside, counter
spindle |
Chuck rinsing device for counter spindle,
outside |
| Clamping pressure adjustment, motor-adj.
valves MS |
Clamping pressure adjustment with motor-adjustable
valves The clamping pressure can be specified by NC program |
| Clamping pressure adjustment, motor-adj.
valves CS |
Clamping pressure adjustment with motor-adjustable
valves The clamping pressure can be specified by NC program |
| Upgrade dyn. two-pressure, CS |
Dynamic two-pressure clamping at the control for
the counter spindle The clamping pressure can be specified by NC
program Note: This text module is an upgrade for the clamping
pressure |
| Coolant supply through the counter
spindle |
Coolant supply through the counter spindle |
| Tailstock function for counter
spindle |
Tailstock function for the counter spindle,
mechatronic control of the supporting force, selectable per program
Thrust force 250-600 daN, CTX beta / CTX beta TC. Thrust force
250-1200 daN, CTX gamma TC |
| Counter spindle ISM 65, A2-8 |
Counter spindle as integrated spindle motor, ISM
65, A2-8 - Drive power 14/17 kW (18.7/22.7 hp) (S1-100%d.c. /
S3-40%d.c.), - Torque 275/345 Nm (202.8/354.4 lbft) (S1-100%d.c.
/ S3-40%d.c.), - Speed range 0-5.000 rpm - Partial hollow clampin |
| Hinged type chip conveyor |
Hinged typ chip conveyor incl. coolant tank and
coolant pump, 6 bar (87 psi)/20 litre/min |
| BFU 8/80 bar, freq. con., 980 l,
cooler |
Compact coolant system, consisting of: - coolant
tank, 980 litre - 8 bar/80 litre/min and 80 bar/11 litre/min
(theoretical pump performance) with frequency-controlled D41252871
pumps programmable via M- and H-functions coolant supply
turning/milling |
| Mechanical oil mist extractor
1100m³/h |
Mechanical oil mist extractor, 1100 m³/h (38,830
ft³/h) with dirtiness indicator, class of filtration H13 |
| Chain magazine for 60 tools |
Chain magazine 60fold, instead of chain magazine
30fold |
| Workpiece touch probe RMP40,
Renishaw |
Workpiece touch probe RMP40, Renishaw -
Interchangeable in turning/milling spindle - Probe reception and
tracer point with data transfer between probe and receiver by
radio signals - Incl. measuring cycle package Inspection Plus Notes:
- Custom meas |
| Tool measuring device RP1, Renishaw |
Tool measuring device RP1, Renishaw Automatic
5-way tool measurement in the machine by means of touch cubes to avoid
measuring and transmission errors. Precise measurement of tool length
and tool diameter for stationary tools (turning tools). The
measure |
| Tool admission Capto C6, instead
HSK-63A |
Turn/mill spindle and tool magazine with tool
reception Capto C6 (Sandvik) |
| Automatic actuation of sliding cover,
electrical |
Automatic actuation of sliding cover, electrical.
(Remark: option B-L7250, automatic loading hatch is not possible) |
| Interface for bar feed/loading
magazine |
interface for bar feeder or bar loading
magazine |
| Electrical interface for Robo2Go |
Electrical interface standard Profibus for Robo2Go
(Only at Siemens control) Incl. - Additional compressed air supply -
Additional Ethernet interface - Power supply of the robot by the
machine - User interface integrated into CELOS (with CELOS 3
as |
| 3-jaw chuck THW PLUS 260-81, make
Schunk |
3-jaw power clamping chuck with through-hole and
jaw quick-change system type THW PLUS 260-81, make Schunk, incl.
connecting elements |
| 3-jaw chuck, THW PLUS 260-81, make
Schunk |
3-jaw power clamping chuck with through-hole and
jaw quick-change system type THW PLUS 260-81, make Schunk, incl.
connecting elements |
| Window rinsing of the security
window |
Window cleaning of the security window of the
working area door by compressed air (Remark: The employment of coolant
can limited the view on the workpiece at machining) |
| 3D data model of working area on CD (Step
a.IGES). |
3D data model of working area of specified machine
as data format Step and IGES. Delivery of 3D data model will be by
CD. |