Dispositivo di avvolgimento per profili da 20 a 100 mm di larghezza e da 5 a 250 mm di altezza Compresi i trasportatori a rulli, 2 metri a destra e a sinistra Telaio completamente mobile  ...

• maggiori informazioni

Forno di montaggio Ruchser RU-EBL2, 5-S Masch. N. 00664-2-96 Peso circa 700 kg Anno di costruzione 1996 L x W x H: 350 x 80 x 130 cm La macchina è in buone condizioni, pronta per l'uso. Parti di ricambio/Servizio MATEC CH-4952 Eriswil/EN-79618 Rheinfelden Modifiche, errori e vendita intermedia riservati ! Sistema MATEC - Technik GmbH Ingegneria meccanica Tappetino fresa 4 CH-4952 Eriswil/Svizzera 0041 62 966 18 32 Fax 0041 62 966 21 12

Dati tecnici: - Set di clip - Diametro della foglia di striscia di vetro circa. 300mm - pneum. Bloccaggio materiale - Unità 400 V - Pressione di lavoro 7 bar - Consumo d'aria per operazione approssimativamente. 1.6 L/corsa - con: - Rimozione - Navata a rulli con Posizionamento - fermata di misurazione 3000 mm - Alimentazione - Navata a rullo 3000 mm - E.- Pulsante piede - Riduttore di pressione - Requisito di spazio circa W 4200 x H 1700 x D 900 mm - Peso circa. 600 kg

Dimensions (L,W): - mm Weight: - kg adjustable height (yes/no): ja 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• maggiori informazioni

Number of machnines: - Loading meters, approx.: - Total weight, approx.: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• maggiori informazioni

: 3000 Working height: 2500 mm : 300-800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• maggiori informazioni

Clamp length: , mm Clamp width: , mm : , Nm RU-LH Painting Assistance Painting assistance for the simultaneous painting of sash and glazing ledges. A clamp has to be positioned in each corner of the already made frame. The operation is started by using a foot valve. For different thickness of ledges the clamping device is height- and depth adjustable. The positioning is diagonally and the clamps stick out of the wood about 25 mm. Now the frame can be pressed into the sash and is fixed. For the painting the frame is positioned now about 10 mm outside in front of the sash. After drying, the frame is pressed into the sash, it will be removed before the glazing. The clamps can be removed by han ...

: 3400,4550 mm Working height: 2500 mm : 300 - 800 mm Glazing and control press RU-VGP3 Glazing and sealing press, clamping width max. 3150 mm, Length 3400 mm, width 900 mm, height 2500 mm, contact height 1900 mm, Pressing beam height 2400 mm, plant part covered with felt, installation surface as roller conveyor, lifting device from 300 - 800 mm. Left and right each a role as edge protection for elements up to 2500 mm height. (When ordering specify whether RIGHT or LINKER Pressbar mobile!) alternatively: ------------- RU-VGP4 Glazing and control press, version like RU-VGP3 however span max. 4000 mm, length 4550 mm (When ordering specify whether RIGHT or LINKER Pressbar mobile! (technical da ...

Dimensions (L,W): 1400 x 1750 mm Weight: , kg tiltable yes/no: ja RUCHSER assembly tilting table RU-MKS 1,4 --------------------------------------- Universally applicable work table e.g. for frame assembly, roller shutter box assembly, bars, sash fittings, glazing Equipment demonstration machine, alternative / optional equipment on request! Pos. 1.0: Article no .: 8820000 RU-MKS-1,4 assembly tilting table Basic dimensions 1400 x 1750 mm, extended 3400 x 2500 mm Support surface with 3 support bars, 2 of which are adjustable, one permanently mounted on the upper extension, covered with felt. Support surface with width and Height / depth pull-out. Pneumatic tilting device, Payload 130 kg. Actua ...

0: 2750 mm Working height: 2500 mm 0: 300-1000 mm RUCHSER glazing and sealing table RU-SW3-90° year of manufacture 2022 ----------------------------------------------------- Vertical work table with lifting device and turning device. Especially Suitable for glazing and sealing wooden windows on both sides. Furnishing: System part covered with felt Infinitely variable pneumatic lifting device, Stroke of 300 mm - 1000 mm, based on roller conveyor height Turning device for sealing on both sides, with roller conveyor 150 mm roll length 2 pneumatic tensioners for clamping the window to the turning device Version with special turning device for pushing through the on the Roller conveyor set up wi ...