Ultrafiltration system in a 40ft container. Process specification Raw water Groundwater, surface water, pre-treated waste water Flow capacity 12 to 38 m³/h Water temperature 2 to 35°C pH 6,5 to 9,0 Membrane pore size 0,02 μm Membrane module no 2 x 4 Membrane surface per module 60 m² Membrane surface total 480 m² Suspended solids inlet ca. 0,5 to 50; max. 100 mg/l Suspended solids outlet < 0,5 mg/l Maximum pressure in plant 5,0 bar Main components Pre-filter with automatic backwash Flocculation with pH adjustment Ultrafiltration Backwash Chemical enhanced backwash (CEB) Dosing station for flocculation and pH adjustment Dosing station for chemical enhanced backwash (CE ...

Contenitori impilabili Produttori Gemp e Unold ridolesiato internamente Pharma Tombino con diametro di 450 mm Raccordo di drenaggio DN 80 Peso: circa 300 kg Pezzi: 8 pezzi disponibili  ...

• maggiori informazioni

Vendere un feed ET completamente assemblato per una macchina da imballaggio Uhlmann UPS 1-4 Alimentazione sostitutiva revisionata  ...

• maggiori informazioni

1 fasciatrice con tunnel di compattazione Produttore: Urban Maschinenbau GmbH, Germania Tipo: SB 500 Sistema di bande lineari completamente automatico a diversi tipi di prodotti in gruppi e impilati in alto con involucro termoretrainte alla confezione. Il sistema di fasciatura funziona con due ruoli cinematografici, cross sealed. Alimentazione del prodotto con trasportatore inalimentazione motorizzato, lineare Rullo a pellicola motorizzata (superiore e inferiore) Sigillare e tagliare attraverso la serraggio a caldo con controllo elettronico della temperatura Pannello di controllo per un facile controllo di tutte le funzioni della macchina Direzione di rotazione della macchina: da s ...

grinding diameter: 350 mm grinding length: mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• maggiori informazioni

grinding diameter: 99999 mm grinding length: 99999 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m We offer the overhauling of your Kellenberger U-machine. Mail serial number and foto of the machine and you will get an offer. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 3000 mm y-travel: 1600 mm z-travel: 1250 mm Control: Heidenhain type: TNC 426 table surface area: 2000x1600 mm Table load: 12500 kg Rotary table: 360 ° spindle turning speed range: 12-3000 U/min Feed: 1-9999 mm/min Rapid movement: 10000 mm/min total power requirement: 80 KVA weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2800 mm y-travel: 1000 mm z-travel: 1200 mm table surface area: 2000 x 800 mm rotary table dia.: 800 mm spindle taper: SK 50 spindle turning speed - stepless: 50 - 2000 U/min max. torque on the spindle: 3000 Nm spindle drive: 30 kW feeds longditudinal/cross/vertical: 2 - 2000 mm/min rapid motion -longitudinal/cross/vertical: 7 m/min control: SIEMENS control: SINUMERIK 850 M no. of tools in magazin: 56 workpiece diameter at full load: 114 mm wotkpiece diameter with 2 vacant positions: 200 mm workpiece length: 400 mm weight of tools max.: 16 kg tool changing time: ca. 8 - 9 sec internal coolant system feed: ja / yes total power requirement: kW weight of the machine ca.: 25,4 t dimens ...

spindle diameter: 90 mm x-travel: 1000 mm y-travel: 1200 mm z-travel: 1200 mm feed movement: 710 mm spindle taper ISO: 40 turning speed range: 8 - 1600 U/min table-size: 1120 x 1000 mm table rotating: 360 ° table load: 2,5 t total power requirement: 11 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 4,5 x 3,3 x 3 m separate switchboard, rapid feed, some tool holders, without face plate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mm x-travel: 2005 mm y-travel: 1860 mm z-axis: 1620 mm w-axis: 706 mm control: Siemens 840 C SW5.1 turning speeds: 2500 U/min surface area: 2500 x 2000 mm spindle taper ISO: 50 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m SK50 tool holder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.