Systèmes de fenêtres WEINIG Univar 6 P

machines à bois / machines de production de fenêtre / Systèmes de fenêtres

Gebr. Engelfried oHG
[ profil de revendeur ]

Monsieur Florian Engelfried
73432 Aalen
Germany

07361-986... téléphone

revendeur
agréé

RESALE membre depuis que 2014

liste des machines (192)

demande

ajouter à la liste de suivi

demande

Numéro de l'article: 163920618	Quantité: 1	Date: 08.11.2024
Année de fabrication:	Emplacement: Deutschland

Prix:	6,000 EUR
Fabricant:	WEINIG
Modèle:	Univar 6 P
Type de machine:	Systèmes de fenêtres
Description:	Systèmes de fenêtres WEINIG Univar 6 P machine d'occasion Number of boring spindles: 3 St. Number of tools: 1.3/4.1. St. Spindle diameter: 50,40 mm Spindle length: 120,320,125 mm weight: 2500 kg loading dimensions L x W x H: 3800x1400x2000 mm table length: 3470 mm Weinig Univar 6 P In order to sell ---------------------- Operating voltage: 380 volts, 50 periods. For milling around windows, doors and similar with uneven edges Profiles. Arrangement of the aggregates: 1. Synchronous spindle on the right, pneumatically clocked. 2. Profiling spindle on the right 3. Fitting spindle Profiling spindle suitable for holding several tools one on top of the other. Spindle movement pneumatic. The 1 spindle works in synchronization for tear-free milling. Respectively This spindle plunges the last 100 mm of a frame end with the Insert the appropriate tool into the wood to prevent tearing at the frame corners avoid. Machine stands, tables, stops: Machine body made of heavy, torsion-free and vibration-damping elements. Stops on the right in the profiling area made of Pertinax. Before Profiling spindle a split stop with sliding bar for short parts. Additional opening rail for large format frames. Feed system: Continuous, chainless feed equipped with rubber rollers. Blow-off device for feed rollers and table. Spindles, hood: Spindles with high concentricity and dynamically balanced. Extraction hoods designed for the cheapest chip flow. Easiest tool change Quick-opening hood lid. Machine operation, setting aids: Operating the machine from the front. Setting the stops for Tool diameter using mechanical number display. Machine electrics, motors, controls: Electrical design according to DIN VDE 0113 - Electrical equipment from Industrial machines EN 60204 IEC 204-1. Further electrical regulations are not taken into account. Engines dynamically balanced. Control of tool positions via selector switch on the control panel. Tools: Machine equipped with operating tools, but without Editing tools. SPINDLE 1 Synchronous spindle Number of tools: 1 Spindle speed: 6000 rpm Spindle diameter: 50mm Tool clamping length: 120 mm Tool diameter max. (milling): 232 mm Tool zero flight circle: 112-140 mm Basic position under table: 10 mm Motor strength: 4 KW (5.5 KW) SPINDLE 2 Number of tools: 4 Spindle stroke vertical: 3 x 80 mm = 4 tools Can be switched to 2 x 95 mm = 3 tools Spindle speed: 6000 rpm Spindle diameter: 50mm Tool clamping length: 320 mm Feed profiling unit: 8 m/min Feed roller width: 50mm/35mm Feed roller diameter: 95 mm Stop height: 70 mm Working width: min. 30 mm, max. 220 mm Working height: min. 30 mm, max. 100mm Workpiece length without tenon: min. 245 mm Tool diameter max. For zero diameter 112 mm: 210 mm For zero diameter 140 mm: 232 mm Tool diameter max. (milling): 232 mm Tool zero flight circle: 112-140 mm Basic position under table: 10/5 mm Motor strength: Spindle: 11 KW Feed: 1.1 KW Feed profiling unit: continuously 6-12 m/min Feed roller width: 50 G41112123 mm Feed roller diameter: 95 mm Stop height: 70 mm Working width: min. 30 mm, max. 220 mm Working height: min. 30 mm, max. 100mm Workpiece length without tenon: min. 245 mm Special equipment: 3 Mechanical spindle brake for synchronous spindle, profiling spindle and Additional aggregates SPINDLE 3 1 fitting milling unit, right: for milling the fitting groove in the Milling pass or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch in the control panel. Motor power: 2.2 KW Speed: 6000 rpm Spindle diameter: 40mm Clamping height: 125 mm Tool flight circle: min. 140 mm, max. 180 mm Basic position below table level: 10 mm Motor reinforcement for synchronous spindle from 4 KW to 7.5 KW Motor reinforcement for profiling spindle from 5.5 KW to 11 KW Screen controls for 99 window types. 1 type can hold up to 8 different parts contain. Manufacturing options: individual parts, milling. Data entry via Keyboard with integrated operator guidance and error diagnosis. Free-standing control cabinet --------------------------------- (technical data according to manufacturer - no guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. seller offer No. resale 1305-6827
Machine en stock:	Oui
Seller-item-No.:	1305-6827

Partager cette machine sur Facebook:

	WEINIG	Univar 10
	WEINIG	Univar 10
	WEINIG	Univar 10/3
1998	WEINIG	Unitec 10 + Univar 10	17000 EUR
1998	WEINIG	Univar 10	8500 EUR
1990	WEINIG	PROFIMAT 22N
1995	WEINIG	PROFIMAT 23E
	WEINIG	Profimat 23	16000 EUR
	WEINIG	PROFIPRESS 3500
	WEINIG	PFA 17N

1999	WEINIG	Univar	5000 EUR	[Apr 2022]
	WEINIG	UNIVAR 10	18500 EUR	[Sep 2017]
	WEINIG	UNIVAR 6	5500 EUR	[Dec 2013]
	WEINIG	Univar 10	5000 EUR	[Nov 2021]
	WEINIG	UNIVAR 10	17500 EUR	[Apr 2017]
	WEINIG	UNIVAR	3900 EUR	[Mar 2013]
	WEINIG	UNIVAR 10	18500 EUR	[Sep 2017]
	WEINIG	UNIVAR 6	5500 EUR	[Dec 2013]
1998	WEINIG	Univar 10	5500 EUR	[Dec 2021]
1986	WEINIG	Univar 1 UFA 030 E.42.452.	3670 EUR	[Jun 2017]

Systèmes de fenêtres WEINIG Univar 6 P

Enquête

plus WEINIG Univar 6 P + similar WEINIG-Modèle

Prix: sold WEINIG Univar 6 P + similaires WEINIG-Modèle