| Description: |
Raboteuses 4 faces WEINIG Powermat 500 Fenster
machine d'occasion
Number of spindles: 6 St.
Working width: 230 mm
Working
height: 120 mm
Length of the planing table: 2500 mm
Feed
motor: 4 kW
Feed speed: 5-30 m/min.
Control: Weinig PowerCom
Weinig Powermat 500 for window
production
---------------------------------------------
Machi
ne will be checked at our warehouse
Short
summary:
---------------------------------------------
6
Spindles with 8,000 rpm and 7.5 KW
5 x HSK/Powerlock
Window
package with glazing bead separation
Spindles axially and radially
CNC controlled
right and upper spindles with common pneumatic
timing for
Glazing bead cutting
Large control Powercom with
touchscreen
Detailed
description:
---------------------------------------------
Too
l arrangement No. 018 for window production
Technical
specifications:
---------------------------------------------
Working width 20 - 230 mm (at tool cutting circle 93 - 125
mm)
Working height 8 - 120 mm (at tool cutting circle 93 - 125
mm)
1. Tool
holder
---------------------------------------------
First
lower tool holder
Motor with brake 7.5 KW
Diameter:
40mm
Speed 8,000 rpm
including high-performance ball
bearings
Tool flight circle 125 - 180 mm
In connection with
PowerLock 93 - 180 mm
Axial adjustment range 17 mm
Hardened
table insert in front of the 1st lower tool holder
2.
POWERLOCK/HSK tool
holder
---------------------------------------------
First
right tool holder
Motor with brake 7.5 KW
Speed 8,000
rpm
including high-performance ball bearings
Tool flight
circle 93 - 200 mm
Maximum throat depth 35 mm
Axial adjustment
range for spindle 80 mm
Axial adjustment range for PowerLock 55
mm
Adjustment path radial
Min. tool diameter at stop level 93
mm
Max. tool diameter behind stop level 200 mm
Axially and
radially CNC controlled
3. POWERLOCK/HSK tool
holder
---------------------------------------------
First
left tool holder
Motor with brake 7.5 KW
Speed 8,000
rpm
including high-performance ball bearings
Tool flight
circle 93 - 200 mm
Tool cutting circle for straight cutter heads
max. 163 mm
Maximum throat depth 35 mm
Axial adjustment range
for spindle 80 mm
Axial adjustment range for PowerLock 55
mm
Pressure shoe in front of the left tool holder,
including 2
lateral pressure rollers, spring-loaded
Axially and radially CNC
controlled
4. POWERLOCK/HSK tool
holder
---------------------------------------------
First
upper tool holder
Motor with brake 7.5 KW
Speed 8,000
rpm
including high-performance ball bearings
Tool flight
circle 93 - 200 mm
Tool cutting circle for straight cutter heads
max. 163 mm
Maximum throat depth 35 mm
Adjustment path axial
40 mm
Axially and radially CNC controlled
5.
POWERLOCK/HSK tool
holder
---------------------------------------------
Second
upper tool holder
Motor with brake 7.5 KW
Speed 8,000
rpm
including high-performance ball bearings
Tool flight
circle 93 - 200 mm
Tool cutting circle for straight cutter heads
max. 163 mm
Maximum throat depth 35 mm
Adjustment path axial
40 mm
Axially and radially CNC controlled
6.
POWERLOCK/HSK tool
holder
---------------------------------------------
Second
lower tool holder
Motor with brake 7.5 KW
Speed 8,000
rpm
including high-performance ball bearings
Tool flight
circle 93 - 225 mm
Maximum throat depth 15 mm
Adjustment path
axial 40 mm
Adjustment path radial
Min. tool diameter to table
level 93 mm
Max. tool diameter 6 mm under table level 225
mm
Axially and radially CNC controlled
Stop on the 2nd
lower spindle for round rod milling cutters
excepted
Additional short table tops before and after the
lower spindle
for profiling work with large valley
depths
All tool holders with high
concentricity.
Lubrication points for the axial tool holder
movement.
feed
system
---------------------------------------------
Frequency
-controlled feed, 5 - 30 m/min.
infinitely variable with brake 4
KW
Feed roller in front of the 1st lower tool
pneumatic
high-low controlled
Durofer pointed tooth rollers (Weinig
patent)
with depth limiter and self-cleaning
Adjustment path
of the feed rollers opposite
left tool holder, axial 35
mm
Reduction of the center distances between the feed pendulums to
400 mm included
additional feed roller (diameter 95 mm and 140
mm)
and shortened roller spacing
machine
electrics
---------------------------------------------
Operat
ing voltage 400 volts
(Voltage range 380 x 420 volts), 50
Hz
Electrical design according to DIN VDE 0113,
electrical
equipment of industrial machines
EN60204, IEC-204-1. Other
electrical regulations
are not included.
Control cabinet (with
control panel) separately from
Machine, distance control
cabinet-machine: 2.5 m
Machine stand, table and
stops
---------------------------------------------
Dressing
table 2.5 m long (incl. jointing ruler)
Manual Waxilit pump for
table resin removal.
A driven rubber roller in the outfeed
table,
50 mm wide, air cushion system in the machine table,
1
track controlled via pendulum shafts.
pressure rollers and
guides
---------------------------------------------
Pressure
rollers from above, spring-loaded
Lateral pressure roller on the
infeed table, spring-loaded
Additional discharge for round bar
production after the second upper spindle
machine
operation
Window package 1 Powermat
500/018
---------------------------------------------
1. Right
spindle pneumatically clocked axially (55 mm)
1st and 2nd upper
spindle pneumatically clocked axially by selector switch
(40 mm),
saw blade max. 180 mm.
Discharge after the 1st upper spindle
axially manually adjustable (at 0,12,0,18)
Joint control of the
right and top
Spindle (axial stroke) and the glazing bead
discharge
via manual selector switch in control panel
Glazing
bead removal after (last) upper one
Spindle pneumatic
forwards/backwards.
Additional non-powered feed G41212123
pendulum
after the last upper spindle to hold down
the square
bar
Stops to the right spindle at 35 mm
left out for cutting
out square strips
Machine prepared for electrical linking
for
parts - return system including emergency stop chain
parts
monitoring
Window package 2 Powermat
500/018
---------------------------------------------
PowerCom
, touch screen
Guide ruler to the left spindle 8 mm thick,
pneumatic
controlled to timber width. standard rulers are
omitted,
The standard working width of the complete machine is
reduced
from 230mm to 200mm. For last production manually
set
to wood width
Motorized axle adjustments:
5 radial
motorized adjustment and positioning of the tool holders
in
connection with PowerCom, spindle no. 2,3,4,5,6
5 axial
motorized adjustment and positioning of the tool holders
in
connection with PowerCom, spindle no. 2,3,4,5,6
Motorized
axis adjustment and positioning of the feed up/down
in connection
with the PowerCOM
Central location of greasing points at the
front of the machine
PowerCom
control:
---------------------------------------------
Profile
and tool data management software
Setting values can be calculated
or saved.
These are shown on the electronic double
displays.
Touchscreen - function for graphically supported
operation
10,000 profile and tool storage locations
each
Integrated network card for connection to OptiContro or other
PCs
USB connection for manual data transfer
safety and
soundproofing
---------------------------------------------
Sa
fety full fairing
Easily foldable safety hood with window
covers
the entire work area and protects against
mechanical
Driven.
When the safety hood is raised, tool
holders
and feed switched off automatically.
With the CE
version, the safety cover can be opened during
automatic mode is
not possible.
Electromagnetic locking of the safety hood
(only
after the tools have come to a standstill, approx. 15 seconds,
the
hood can be opened)
The machine comes with CE mark and
associated
EC declaration of conformity supplied.
Two interior
lights in the safety hood
For ripping work, e.g. sawing and
multiple profiling,
you need suitable protective
devices.
Option: existing PowerLock spindles and
tools
Option: Outfeed conveyor belt with discharge for glazing
bead
(technical data according to the manufacturer -
without guarantee!)
The data for this ad was
created with ModulMWS - the software solution of LogoTech
oHG.
seller offer No. resale 1305-2712
|