Emballage de film HALOILA Modèle n°: Octopus T200 Année de fabrication : 2015 Puissance maximale : 20 kW Courant à pleine charge: 45A Tension: 3 400VAC Fréquence: 50Hz Courant de court-circuit max: 6kA  ...

• plus d'information

Overview  The Octopus film winder was built in Finland in 2010. The machine was in use at a mineral water company until recently and is already dismantled and immediately available.   Technical details   Speed of the motion sequences  Ring up/down 0.15 m/s  Ring rotation 18 rpm  Film insertion 4.5 m/s  Film: LLDE pre-stretched  Hold-down device  Pallet dimensions   ¼ EURO,  ½ EURO,   EURO,   1200 × 1000,   Max. height 2400 mm,   Min. height approx. 50 cm depending on the system settings  Dimensions  Length 2850 mm   Width 2150 mm   Height 3140 mm   Weight 1050 kg   Voltage: 3 × 400 VAC 50 Hz +N+earth  Air pressure 6 bar, 9 l/operating cycle 

Emballeuse de palettes Haloila CobraX 2016, Emballeuse de palettes, bras rotatif, enrubanne jusqu’à 2300mm, 1Ph  ...

• plus d'information

Overview   The pallet winder was built in 2019 by the manufacturer Haloila. The machine is in good condition and available immediately. It was recently used in the factory of a German contract bottler. The whole line, on which this stretch wrapper was used was sold, only the stretch wrapper remained, as the buyer already had one. Technical Details Double head stretch wrapper High Speed winder with up to more than 200 p/h Top centering device Cover sheet applicator Scope of Delivery  Electrical cabinet Pallet lifting station Technical documentation

General SKUR1177 LocationBarneveld MakeTechnoglass S.P.A. (IT) Type1825 ltr. No.4622 Year of construction1990 Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket7 Bar Main Features MaterialGlass Volume1825 Ltr. Motor1.1 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity1825 Ltr (1600 Ltr) Vessel sizesdia.1000mm x2272mm Dished bottomcheck Dished top sidecheck Top connections2x DN200, 2x DN100, 2x DN80 OutletDN80 With jacket(130 Ltr.) Max. temperature-10/200 degr.C. With propellor stirrercheck Motor1,1 kW, 380 Volt (EX) Speed mixing shaft177 rpm Glass Reactors MaterialGlass - Enamel Information Total height3,7 M Weight13 ...

material width: 0250 mm material thickness: 5,00 mm no. of straightening rolls: 19 sheet thickness - min.: 0,20 mm diam. of the rolls ca.: 18 mm speed: 5-12 m/min back-up rolls-needle bearings: ja / yes bronze sliding bearing: ja / yes total power requirement: 1,70 kW weight of the machine ca.: 0,600 t dimensions of the machine ca.: 1,00 x 0,90 x 1,30 m Part straightening machine - max. vertical roller spacing 8 mm - oil circulation lubrication of the cardan shafts and straightening roller bearings - infeed table / outfeed table - speed regulation via handwheel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Construit en 2005 Capacité jusqu’à 35 palettes/h Largeur du film 500 mm Diamètre max 260 mm Diamètre de base max 76 mm Épaisseur du film 17-30 m Équipement - ceintures d’alimentation les ceintures de livraison  ...

• plus d'information

General SKU367T1099 LocationBarneveld MakeRobopac TypeEcoplat FRD No.KN /114967 Year of construction2012 Main Features MaterialStainless steel Motor0.9 KW Specified Features - Miscellaneous MaterialStainless steel Motor0,9 kW Information Total height2,8 m Weight345 kg CEcheck Floor space1,65x2,6 m Extra SpecificationsRotation speed table: 4-10 rpm 2400 mm wys 1600 mm MiscellaneousRobopacMiscellaneous > MiscellaneousBrand > Robopac What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us i ...

General SKU300U904 LocationBarneveld MakeDott. Bonapace & C. TypeFantasy st No.1149-09 Year of construction2010 Main Features MaterialStainless steel Specified Features - Miscellaneous MaterialAluminium, Stainless steel Information Total height1.1m Weight160kg CEcheck Floor space0.77x0.41m Extra Specificationsthis machine comes with extra parts and material for production working characteristics: mould With: 230mm Mould length: 150mm output op to: 6 cicli/min max dimentions of the PVC+alluminium blister: 60x100mm max. dimensions of the alluminium + alluminium blister: 85x160mm Socket depth of the PVC blister: 15mm Socket depth of the alluminium blister: 10mm electrical suppl ...

La machine à sac de bas TRIUMPH III, Windm Ller et H Lscher, avec unité de correction inférieure, 2-ply, photocell, plusieurs anciennes assiettes et allées, option : imprimante 4 couleurs pour le nettoyage final. ...

• plus d'information