Utilisé Heuft Empty Bottle Inspector InLine IXs reflexx Dispositif n° 2ZG044698 Condition : très bon, prêt à l’emploi à court préavis ·       Mise en service 6 mai 2012 ·       Mise à niveau pour l’intégration ultérieure d’un contrôle au sol supplémentaire à l’aide de la technologie des rayons X ·       Contrôle de bande Heuft Synchrone TX ·       Réseau Heuft Hlan ·       Haylofts deux façons de décharge avec div. Heuft transport de conteneurs Convejor ·       Assistant Résolution des problèmes ·       Instructions guidées de l’assistant logiciel pour les différents changements  ...

Utilisé Heuft Verre Vide Bouteille Inspecteur InLine reflexx Dispositif no 2ZG042943 Condition: très bon, prêt à l’emploi à court terme ·       Date de livraison originale 12.2011 ·       Puissance max. 46 000 fl./h ·       Direction de passage de gauche à droite ·       Deux déclencheurs ·       Souffleur Secomak au lieu de l’air comprimé ·       Détection de transpondeur pour bouteilles d’essai RFID ·       Surveillance des rejets ·       Réseau Heuft Hlan (Mise à niveau facultative) ·       Hayt deux façons de décharger Delta K à droite ·       4 Licences de variétés ·       ...

PET Empty Bottle Inspector HEUFT InLine TI 60 BFS2-r Dispositif no 2SG021663 Construction: / année de construction: 2006 Sortie[B/h]: / performance [cont./h]: 36 000 Direction du débit de : / direction mobile à partir de : Direction: / direction de rejet: Emplacement de l’installation : / site d’installation : Devant le remplissage • Unité de base : Inspecteur de bouteille vide • Inspection : 1.Soil-IN-r • Inspection : Estuaire IN-r • Inspection : 1er mur latéral IN-r • Inspection : 2e paroi latérale IN-r • Inspection : SW double résolution-r • Inspection : Anneau de transport/PET-r • Inspection : RefPet abrasi ...

Inspecteur de vitres vides d’occasion HEUFT avec pré-inspecteur et rejet Construit en 2016. Démonté et immédiatement disponible.  ...

• plus d'information

2014 Heuft InLine IR A empty glass inspector from Heuft for the 1 liter milk bottle (white). The corresponding discharge system is included. Task: Monitoring of the incoming flow of bottles Rejecting bottles that are too high, too thick or lying down without disturbing the flow of bottles Bottle bottom inspection Inspection of the muzzle sealing surface Inspection of the inner and outer sidewalls Detection of rust residues Detection of conductive residual liquids (e.g. lye) Detection of residual liquids (e.g. oils, varnishes) using IR technology Rejection of faulty containers and/or output of a rejection signal Monitoring of the rejection process 1.0l milk bottle white Filling ...

Overview The Heuft InLine IR – high speed empty bottle inspector is characterized by its compact installation dimensions. High-speed inspection of empty bottles is easily possible (up to 50,000 bottles/h). It can perform all standard inspections (sidewall inspection, infeed inspection, neck finish inspection, base inspection, discharge inspection, HF caustic and IR residual liquid detection). In addition, it has a separate module for foreign bottle detection (height, contour, color). In 2016 it was overhauled and modified installed including conveyor control. Tech Specs: Capacity: 5,000 – 50,000 bottles / h Compact installation dimensions 2016 overhauled and modified Features: Processes  ...

Overview The Heuft InLine IXs reflexx is an empty bottle inspector for quality control in filling lines. The machine was commissioned in May 2012, is in very good condition and is ready for use at short notice. Technical details  Output: Up to 46,000 bottles/hour Control system: Heuft Synchron TX Network: Heuft Hlan, incl. gateway Licensing: 5 type licenses Equipment: Software wizard for troubleshooting and container changeover Availability: Ready for use at short notice Missing components Thread blow-off (must be added if required) Controls  Monitoring of the incoming bottle flow (optional) Output of a stop signal in the event of incorrect bottle dimensions Inspection of the bottle base,  ...

Output: 36,000 bottles/h, format: NRW white/ GDB 0.7l/ GDB 0.75l green/ Longneck 0.33l KK/ 1.0l Individual, with spare parts, double side wall, thread, neck finish, 2x residual liquid, base and automatic test bottle request, has been serviced regularly, inspection is possiblem, but not under power. ...

• plus d'information

Overview  This Heuft Glas InLine reflexx IR is an inspection machine for empty bottles, designed for quality control in filling lines. The machine has a maximum output of 46,000 bottles per hour and was originally delivered in December 2011. It is in very good condition and ready for use at short notice. The flow direction is from left to right and it is equipped with a Secomak blower instead of a compressed air blow-off system. Technical details  Output: Maximum 46,000 bottles/hour Flow direction: Left to right Equipment: Two triggers Secomak blower Transponder recognition for RFID test bottles Rejection monitoring Heuft HLAN network (can be retrofitted as an option) Two-way rejection Del ...

description: The Machine is in good condition. Compact installation dimensions, high speed possible (50.000bl / h) Checking of: 2 side walls (another 2 side walls could be added) Inlet control, finish control, base control, outlet control, HF caustic and restdual liquid detection, separate module for external bottle recognition (height, contour, color) .. YOM. 2013. It was reconditioned in 2016 + modified. All information without guarantee. capacity: 5000-50000 Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and reloc ...