SHARK 281 CCS (Cut Control System) machine à bande manuelle pour couper de 0° à 60° à gauche. En dehors du mode de coupe manuelle, la machine à sciage peut faire des coupes simples sans opérateur, en utilisant le contrôle du poids de la tête- conduit par un frein hydraulique: après la coupe de la bande s’arrête. Le cadre à ce stade est levé manuellement à la position nécessaire afin de repositionner la barre pour couper . Dans la version avec vice pneumatique (MA), le vice est ouvert/clo-sed par une valve contrôlée manuellement (facultatif avec commande de pédale). MEILLEUR PRIX EN EUROPE

SHARK 281, machine manuelle de sciage à bande à couper de 0° à 60° à gauche. A FEW FEATURES: Panneau électrique (câblage totalement identifiable, stand-by, interrupteur de sécurité à clé lâche, interrupteur principal, interrupteur de changement de poteau, arrêt d’urgence, surcharge magnéto-thermique moteur, bobine de tension minimale, protection contre la phase manquante, dispositif de sécurité à basse tension (LTSD 24 V).- poignée de commande IP55. MEILLEURS PRIX POUR TOUTES LES MACHINES MEP EN EUROPE! DEMANDEZ UN DEVIS

cutting diameter: 250 mm saw band length: 2950 x 27 x 0,9 mm table height: ca. 800 mm band speed: 36/72 m/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,37 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 36/72 m/min capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330x260 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170x170 mm capacity 45 degrees: round: 260/200 mm capacity 45 degrees: square: 250/180 mm capacity 45 degrees: flat: 270x200/200x160 mm dimensions of saw-band: 3650x27x0,9 mm total power requirement: 1,5/1,8 kW Overall size: 2130x1400x1950 mm Weight: 670 kg Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts, vice opens Semiautomatic dynamic system: Manual lowering of the saw blade to the desired position ...

dimensions of saw-band: 3320x27x0,9 mm : 40/80 m/min : 335 mm capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330x260 mm : 260 mm : 250 : 270x200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170x170 mm : 200 mm : 180 mm : 200x160 mm weight of the machine ca.: 640 kg dimensions of the machine ca.: 2140x1300x1950 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-band: 4640x34x1,1 mm : 15-100 m/min : 515 mm capacity 90 degrees: round: 330 mm capacity 90 degrees: square: 320 mm capacity 90 degrees: flat: 510x320 mm : 320 mm : 320 mm : 350x320 mm : 230 mm : 230 mm : 230x310 mm : 320 mm : 320 mm : 380x320 mm : 250 mm : 250 mm : 250x320 mm total power requirement: 4 kW Weight: 1190 kg Overall size: 2000x1200x1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 300 mm saw band length: 3320 x 27 x 0,9 mm mm cutting width: 300 mm Control: NC capacity 90 degrees: flat: 330x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: square: 250 mm capacity 45 degrees: flat: 270 x 200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm band speed: 15 - 100 m/min total power requirement: 2,2 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 3,3 x 2,83 x 2,23 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm turning speed range:: 36 / 72 m/min dimensions of saw-band: 2950 x 25,4 x 0,9 mm weight of the machine ca.: 0,4 t Dimensions (LxWxH): 1,5 x 0,9 x 1,5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I am selling 1998 MEP SHARK 330 AXIS bandsaw in good condition. The saw works perfectly and comes with all original parts and accessories, as well as instruction manual. I am selling due to change to a newer model. ...

• plus d'information

cutting diameter: 300 mm saw band length: 3320 x 27 x 0,9 mm table height: mm band speed: 40/80 m/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 670 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• plus d'information