Melting machine MELTING MACHINE

technologie des processus / machines et installations pour l'ingénierie des processus

UCY Industrial GmbH
[ profil de revendeur ]

Monsieur Nick Breinfalk
82049 Pullach
Germany

+49 (0)89... téléphone

concessionnaire de machines membre depuis que 2024

liste des machines (1525)

demande

ajouter à la liste de suivi

demande

Numéro de l'article: 164554459	Quantité: 1	Date: 20.09.2024
Année de fabrication: 2012	Emplacement: Cologne, Germany

Prix:
Fabricant:	MELTING MACHINE
Modèle:
Type de machine:	Melting machine
Description:	Melting machine MELTING MACHINE machine d'occasion Melting machine- preparation and storage (From a Plant for fire aluminizing steel wire) The furnace for melt preparation is an electrically heated crucible furnace. Ingots of an aluminium master alloy are melted beforehand in the crucible furnace, melting temperature 750°C. The molten aluminium is processed before being fed into the actual melting and holding furnace Processing is carried out using an impeller device, degassing of the melt, degassing agent argon gas. Slag is separated and bound by adding further agents such as flux to the melt. The separated slag is skimmed off using a ladle. The prepared melt is transferred to the melting and holding furnace via the charging funnel using a ladle. Alternatively, if the technological requirements are met, the melt is pumped from the melting furnace into the holding furnace by a pump. The holding and dosing furnace is heated electrically. (The detailed description can be found in the manufacturer´s technical documentation). The furnace is fed via a so-called feed hopper The feed hopper extends into the melt of the dosing furnace The dosing furnace is permanently covered with nitrogen gas to prevent oxidation of the melt. The dosing furnace is tightly closed during operation. The front furnace flap can be opened to clean the melt. The dosing furnace is tightly connected to the coating chamber by a detachable flange connection. Liquid melt is pressed into the coating chamber through a riser pipe which reaches into the melt of the dosing furnace. This occurs as follows: nitrogen gas enters the furnace chamber above the melt through an electro-pneumatic control valve, a preset overpressure is built up in the furnace U4958834 chamber (the furnace diagram can be found in the manufacturer´s technical documentation). The inner chamber pressure is monitored and scanned via pressure sensors. In the event of overpressure, 2 renundant safety valves open. The fill level of the melt is monitored by 2 laser sensors. ( The detailed functional description of the sensors can be found in the manufacturer´s technical documentation ) The coating chamber is emptied by reducing the overpressure in the furnace interior by closing the electropneumatic control valve and simultaneously opening a shut-off valve, the entire nitrogen control line and the furnace interior is thus depressurised. Find more here - / Contact us at - seller offer No. resale 5848556
Seller-item-No.:	5848556

Partager cette machine sur Facebook:

Melting machine MELTING MACHINE

Enquête