This machine is a Karstens A/ASE Internal / External Cylindrical grinding machine & Keller Industrial Vacuum Cabinet. This machine is in good condition and has had a lot of refurbishment done on it. The Internal grinding head has been totally reconditioned and refurbished. 1) The workpiece spindle head has a Variable speed Heynau drive with a speed range of 30 - 450 U/min 2) Dimensions of grinding wheel Ø 400 x 100 x 127 mm. Max. width of grinding wheel 60 mm 3) Taper in tailstock-quill MK 4 4) General information. - Serial No.: 71-143 - Rapid traverse - Internal grinding device - Dressing device - Coolant equipment - Various grinding mandrels and accessories - Head m ...

Grinding length: 650mm, center height: 150mm, grinding wheel dimensions: 400x80x127mm, sleeve diameter with Mk 4 seat: 50mm, weight: 2.9t, including belt filter, electrical circuit diagrams and hydraulic diagrams, an on-site inspection is possible. ...

• plus d'information

distance centrale: 1.000 mm : 380 mm documentation: ja poids de la machine ca.: 2,9 t  ...

• plus d'information

diamètre de meulage : 400x80 mm longueur de meulage : 400 mm hauteur centrale : 155 mm puissance totale requise : 5 kW poids de la machine env. : 2300 kg dimensions de la machine env. : 1,3x1,1,75 m  ...

• plus d'information

grinding diameter: 360 mm grinding length: 650 mm centre height: 180 mm Control: SIEMENS 840 D total power requirement: 15 kW weight of the machine ca.: 9500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• plus d'information

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Technical data Centre height: 180 mm Distance between centres: 650 mm Max. work piece diameter: 360 mm Grinding weehl left side: Diameter: 400 mm Width: 100 mm Bore: 127 mm Grinding wheel right side: Diameter: 250 mm Width: 32 mm Bore: 76.2 mm Workpiece weight on centres max.: 2500 kg Grinding spindle head: Peripheral speed: 35 m/s Work piece spindle head: stepless from: 30 rpm up to: 450 rpm Swivelling range: 0 - 90 ° Taper in tailstock:: 4 MT Spindle stroke: 45 mm Spindle diameter: 50 mm Shearing force: 0.1 - 0.8 kN Table angular displacement: 12.5 ° Table speed: stepless from: 0 m/min up to: ...

Rétrofit 2015 Rectifieuse cylindrique Karstens K 52, Contrôle CNC Eckelmann ENC 66, Longueur de la pièce 650 mm, Weiss Schleiftechnik Retrofit 2015, Expansion grâce à l’automatisation 2023, Puissance du coffre 7,5 KW, Hauteur centrale 180 mm, Ø meule 500 mm, Piquer droit / en diagonale, système de filtration, Voiture. Chargé entre les pointes, Bande prismatique vierge / pièce finie

Machine number: 980491019031 Table dimensions: approx. 1260 x 190 mm Dimensions of the magnetic chuck: diameter 300 mm Diameter of the internal grinding wheel: approx. 100 mm Diameter of the installed external grinding wheel: approx. 400 mm Centre width: approx. 1000 mm Orbital diameter over bed: approx. 500 mm With KARSTENS CNC control Accessories: a variety of grinding wheels of different diameters (example diameter: 325 mm, depth: 45 mm, diameter: 500 mm, depth: 35 mm, diameter: 400 mm, depth: 100 mm) and other grinding wheel dimensions Note: Transportation takes place on standard trucks 4100 x 2700 x 2200 mm 4000 kg unchecked loaded on truck

Type/serial number: 1914 Table dimensions: approx. 800 x 120 mm Diameter of the magnetic clamping plate: approx. 150 mm Diameter of the installed external grinding wheel: approx. 330 mm Diameter of the installed internal grinding wheel: approx. 40 mm Centre width: approx. 500 mm With accessories as shown in the pictures. Including tailstock, three-jaw chuck (diameter: approx. 170 mm) and other accessories With technical documentation as shown in the pictures 1750 x 1700 x 1800 mm 2200 kg unchecked loaded on truck

grinding diameter: 360 mm grinding length: 1600 mm centre height: 180 mm internal diameter: 0 mm grinding depth: 0 mm swing diameter: 0 mm total power requirement: 40 kW weight of the machine ca.: 10000 kg dimensions of the machine ca.: m K A R S T E N S (Germany) Universal CNC” - Cylindrical Internal and Face Grinding Machine also for grinding excentric and cam profiles and polygons and even suitable for Threadgrinding Model K 51 – 1500 Year 2000 Serial No. 99 093 Height of centres 180 mm Distance between centres / grinding length 1,700/1.600 mm Cylindrical Grinding: Grinding Ø, approx. 5 - 360 mm Grinding wheel: ...