machines de travail des métaux / fraiseuses / Fraiseuses à table ronde
Fabricant: DMG MORI
Modèle:DMU 80 P duoBLOCK
Type de machine: Fraiseuses à table ronde
Numéro de l'article: 166192330
Quantité: 1
Date: 09.01.2025
Emplacement:
Allemagne
Prix:
Seller-item-No.:040744
| General | |
| Universal milling machine with duoblock construction; Control: CELOS with Siemens 840D sl Operate | |
| Working area 1 | |
| Longitudinal | 800 mm |
| Vertical | 850 mm |
| Cross | 1050 mm |
| Technical Data | |
| Feed rate longitudinal/transverse/vertical | 60000/60000/60000 mm/min |
| Rapid traverse longitudinal/transverse/vertical | 60/60/60 m/min |
| Tool changer | |
| Type of magazine | Wheel |
| Application | Universal |
| Tool changer plane | horizontal |
| Type of gripper | Double gripper |
| Number of tools | 123 |
| Coolant supply ICS | Coolant supply: coolant through spindle centre form AD 40 bar/23 l/min(theoretical pump performance) rotating clear-view window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar, 6 water jets, 4 air jets) pump output (theoretic |
| Chip removal | Chip removal: 2 worm conveyors in the machine bed convey into a chip conveyor (scraper flight conveyor), with interval control, placed at right angles. discharge height: 950 mm / 37.4 in width: 380 mm / 14.9 in |
| NC rotary table | Type of Measuring system Direct measuring system |
| Table surface 900 x 700 mm | |
| 4. Axes (swivelling range) 360 x 0,001 degree | |
| Rotation speed max.4. Axis 40 rpm | |
| Distance between T-Slots 63 mm | |
| Number of Slots 11 | |
| Slot width 14 mm | |
| Maximum load (table centre) 1500 Kg | |
| Centre bore 50H6 mm | |
| Integrated motor spindle speedMASTER® | Drive power (100% DC) 25 kW |
| Drive power (40% DC) 35 kW | |
| Clamping System HSK-A 63 | |
| Spindle taper HSK-A 63 | |
| Speed range - 15000 rpm | |
| Torque (40% DC) 130 Nm | |
| Torque (100% DC) 86 Nm | |
| Cabine | Full protection cabin |
| Spindle taper HSK-A 63 | Spindle taper for HSK-A 63 to DIN 69893 (incl. taper cleaning, adaptation working spindle, tool changer and tool magazine) |
| Taper cleaning brushes | Taper cleaning unit with rotating brushes for spindle taper HSK |
| Stop block + 3-point-support | Stop block + 3-point-support Design according to DECKEL MAHO Standard |
| Tool magazine, wheel, 123 pockets | Tool magazine wheel magazine (2 wheels) with 123 tool pockets |
| Operation panel for loading station tool magazine | Control panel for loading station tool magazine with TFT screen 15” Input on touch screen Windows 10 IoT Enterprise LTSB - 64 bit |
| Infrared measuring probe Renishaw | Infrared measuring probe Type Renishaw OMP 60 SK 40 or optionally chosen spindle taper |
| Tool measuring in machining area Blum Laser | Tool measuring in machining area Blum Laser DIGILOG Automatic retraction of the measuring unit in a protected housing, Tool length and diameter measurement in horizontal/ vertical position |
| 3D quickSET extension package | 3D quickSET extension package for each further machine: software / password (only together with option measuring probe and existing set of measuring tools) |
| Tool breakage control mechanical | Tool breakage control mechanical D5152871 version |
| Sensor package i4.0 | Sensor package i4.0: MPC Machine Protection Control SGS Spindle Growth Sensor ICS flow sensor |
| rotoLENS - milling head camera | rotoLENS - Camera with rotating lens integrated in the milling head Visualization via CELOS and HDMI Digital zoom and recording function |
| rotoLENS - working envelope camera | rotoLENS - Camera with rotating lens integrated in the machine roof Visualization via CELOS (delayed) and HDMI (real time) Digital zoom and recording function |
| Cooling | Cooling by air blast through spindle centre, selection with M function |
| Interface for Oil and emulsion mist separator | Interface mechanical and elektrical for oil- and emulsion mist separator |
| Control cabinet lighting with power outlet | Control cabinet lighting with power outlet Lighting in the control cabinet with motion sensor power outlet 230V - 10A (Type F - Schuko) Other types of outlet on request Connected before the main switch (for this the customer must provide a loadable neutra |
| Operation mode 4 | Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area Release after completed check list |
| 1 Additional set of documents in paper form | 1 additional set of documents: operating and programming instructions in paper form |
| Digital Manufacturing Package | Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b |
| Messenger V4 | The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop |
| Special equipment | L probe package 1 (Renishaw infrared) with calibration device For pulling measurement (Z+) of webs and grooves. With Siemens control only in kinematic basic position and not in connection with Cycle 800. Calibration device for direct installation on the N |
| DMG MORI | DMC 125 U duoBLOCK | ||
| DMG MORI | DMC 125 U duoBLOCK | ||
| DMG MORI | DMC 125 U duoBLOCK | ||
| DMG MORI | DMC 125 U duoBLOCK | ||
| DMG MORI | DMC 55 H duoBLOCK | ||
| DMG MORI | DMC 80 FD duoBLOCK | ||
| DMG MORI | DMC 65 H duoBLOCK | ||
| DMG MORI | DMC 65 H duoBLOCK | ||
| DMG MORI | DMU 40 | ||
| DMG MORI | DMU 65 monoBLOCK |
| 2015 | DMG MORI | DMU 50 | 125000 EUR | [Jan 2019] |
| 2010 | DMG MORI | DMU 40 MONOBLOCK | 115000 EUR | [Nov 2019] |
