| NC swivel rotary table |
Table surface Ø650 mm |
|
Centre bore 32 mm |
|
Maximum load (table centre) 600 Kg |
|
Rotation Speed 5. Axis 20 rpm |
|
5. Axes (swivelling range) +/- 120 degree |
|
4. Axes (swivelling range) 360 x 0,001 degree |
|
Rotation speed max.4. Axis 40 rpm |
|
Distance between T-Slots 63 mm |
|
Number of Slots 9 |
|
Slot width 14 mm |
| Direct measuring system |
Direct path measuring system |
| Cabine |
Full protection cabin |
| Motor spindle 20,000 rpm |
Motor spindle speedMASTER® Spindle speed 20 -
20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86
Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) |
| Spindle taper HSK-A 63 |
Spindle taper for HSK-A 63 to DIN 69893 (incl.
adaptation working spindle and standard magazine) |
| Stop block |
Stop block Design according to DECKEL MAHO
Standard |
| 3D quickSET extension package |
3D quickSET extension package for each further
machine: software / password (only together with option measuring
probe and existing set of measuring tools) |
| Infrared measuring probe Renishaw |
Infrared measuring probe Type Renishaw OMP 60 SK
40 or optionally chosen spindle taper |
| Tool measuring in machining area Blum
Laser |
Tool measuring in machining area Blum Laser
DIGILOG Tool length and diameter measurement vertically |
| Production package 40 bar/23 l/min, 600 l
tank |
Production package: Scraper flight conveyor with
coolant unit 600 l / 160 gallon, paper band filter Discharge height:
950 mm / 37.4 in Width: 670 mm / 26.4 in Internal coolant supply 40
bar/23 l/min / 580 psi/6 gallon/min through spindle centre (AD)
Exter |
| Rotating clear-view window |
Rotating clear-view window cabin door |
| Coolant ring jet |
Coolant ring jet for vertical headstock, 16 water
jets, 7 air jets |
| Coolant tempering |
Coolant tempering for internal coolant unit 600
lt / 160 gallon: Increased tank 980 lt / 259 gallon Heating capacity
max.: 3,000 W / 4 hp Cooling capacity max.: 3,800 W / 5.1 hp |
| VCS Complete extension package |
VCS Complete extension package for each further
machine: software / password (only in conjunction with option
measuring probe or existing set of measuring tools) |
| Sensorpaket i4.0 |
Sensor package i4.0: MPC Machine Protection
Control SGS Spindle Growth Sensor ICS flow sensor |
| Maintenance Package I4.0 |
Maintenance Package I4.0: - measurement of tool
pull-in force - autom. D41252871 lubrication of tool clamp -
monitoring of pneumatics |
| Cooling |
Cooling by air blast through spindle centre,
selection with M function |
| Interface for Oil and emulsion mist
separator |
Interface mechanical and elektrical for oil- and
emulsion mist separator |
| Tropical package (ambient temp. max. 50
°C) |
Package for tropical climate for ambient
temperature of max. 50° Celsius at machine location |
| Control cabinet lighting with power
outlet |
Control cabinet lighting with power outlet
Lighting in the control cabinet with motion sensor power outlet 230V -
10A (Type F - Schuko) Other types of outlet on request Connected
before the main switch (for this the customer must provide a loadable
neutra |
| Operation mode 4 |
Operation mode 4 Process monitoring in the
production Manual intervention with open doors of machining area
Release after completed check list |
| Active Chatter Control ACC |
Active Chatter Control ACC Improved surface
quality combined with reduced machining time, increased tool
lifetime |
| Safety package for power failure |
Safety package for power failure: Voltage control
with fast deceleration trigger Controlled shut down of the control
Display of last executed program number |
| Digital Manufacturing Package |
Digital Manufacturing Package (1) IoTconnector
Allows the use of the Online services from DMG MORI (2) Machine Data
Connector (MDC) Standardized machine data interface Protocols: OPCUA,
MTConnect, MQTT (3) NETservice Qualified support through
internet-b |
| Messenger V4 |
The latest version of DMG MORI Messenger displays
web based the machine live status. It allows to analyze the machine
run-time, downtime, alarms in individually configurable dashboards
and transparently shows the actual status in the manufacturing
shop |
| Service Agent |
Service Agent Overview of all maintenance work on
the machine |
| Special equipment |
rotoLENS - Camera with rotating lens integrated in
the milling head. Display via CELOS and HDMI 4K resolution (3,840 x
2,160 pixels) Digital zoom and recording function Full protection
cabin in safety design included Laminated glass safety screen
Condit |