machines de travail des métaux / fraiseuses / Fraiseuses à table ronde
Fabricant: DMG MORI
Modèle:CTX beta 800 TC
Type de machine: Fraiseuses à table ronde
Numéro de l'article: 166192485
Quantité: 1
Date: 09.01.2025
Emplacement:
Allemagne
Prix:
Seller-item-No.:071669
| General | |
| - Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 100 mm - B-axis ±110° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 5 bar; 20l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor - USB interface, Ethernet interface; Control: CELOS with Siemens 840D sl Operate | |
| Working area | |
| Swing diameter over guide ways | 500 mm |
| Turning diameter | 500 mm |
| Max. Turning Length | 800 mm |
| Bar diameter max. | 65 mm |
| Work spindle (left) | |
| Spindle nose | Flat flange |
| Diametre of spindle nose | 170h5 mm |
| Spindle bore | 87 mm |
| Spindle diametre on front bearing | 130 mm |
| Main drive 1 | |
| Drive power (100% DC) | 25 kW |
| Drive power (40% DC) | 32 kW |
| Speed range | - 5000 rpm |
| Torque (100% DC) | 280 Nm |
| Max. torque (40% DC) | 360 Nm |
| C-Axis Speed | -5000 rpm |
| Torque of C-Axis (holding torque) | 280 Nm |
| Turning-milling spindle | |
| Spindle taper | HSK-A 63 DIN 69893 |
| Spindle speed | -12000 rpm |
| Drive power (100% DC) | 19 kW |
| Drive power (40% DC) | 22 kW |
| Torque (100% DC) | 85 Nm |
| Torque (40% DC) | 100 Nm |
| locking moment | 1000 Nm |
| Floor space/Weight | |
| Dimensions (L x W x H) | 4,78 x 2,2 x 2,02 m |
| Weight approx. | 10000 Kg |
| Control extension TurnPlus | CNC-control HEIDENHAIN Plus IT Control extension TurnPlus |
| 5-axis simultaneus machining | 5-axis simultaneous machining |
| Chuck rinsing device, mainspindle | Chuck rinsing device for main spindle, outside |
| Chuck rinsing device, subspindle | Chuck rinsing device for subspindle, outside |
| Bar machining package, CTX beta, Ø 95 mm | Bar machining package, consisting of: - hydraulic hollow clamping attachment Pullforce 96.5 kN (21.694 lbf) at pmax 45 bar (653 psi) inner dia. of draw tube max. Ø 95 mm (Ø3.74 in) - part catcher, with conveyor belt removal to the left for |
| Counter spindle ISM 52 | Counter spindle as integrated spindle motor ISM 52 (instead of tailstock) - Sync motor - Drive power (100%/40% d.c.) 12.5/14.5 KW (16.76/19.44 hp) - Torque (100%/40% d.c.) 170/200 Nm 125.37/147.5 lbft - Speed range 0-6000 rpm - Partial hollow clampin |
| Reinforced coolant pump, 5 - 20 bar | Reinforced coolant pump, 5 - 20 bar, adjustable with frequency variation in addition to the standard D5152871 pump |
| Extension of the discharge chute about 300 mm | Extension of the discharge chute at the chip conveyor about 300 mm |
| Hinged type chip conveyor | Hinged typ chip conveyor incl. coolant tank and coolant pump, 6 bar (87 psi)/20 litre/min |
| Renishaw Powerprobe Reporter App for CELOS | Renishaw Powerprobe Reporter App Easy monitoring of geometrical tolerances |
| Workpiece touch probe RMP40, Renishaw | Workpiece touch probe RMP40, Renishaw - Interchangeable in turning/milling spindle - Probe reception and tracer point with data transfer between probe and receiver by radio signals - Incl. measuring cycle package Inspection Plus Notes: - Custom meas |
| Calibration device RMP40, Renishaw | Calibration device for the workpiece touch probe RMP40 from Renishaw Scope: magnetic base holder and a polished ground calibration ball (Ø 25 mm), packed in a carrying case Note: Only in connection with workpiece touch probe RMP40 |
| 3-jaw chuck, BBD 210-66, make SMW | 3-jaw power clamping chuck with through-hole, type BBD 210/66, make SMW-Autoblok, incl. connecting elements |
| 3-jaw chuck, BBD 210-66, make SMW | 3-jaw power clamping chuck with through-hole, type BBD 210/66, make SMW-Autoblok, incl. connecting elements |
| 3D data model of working area on CD (Step a.IGES). | 3D data model of working area of specified machine as data format Step and IGES. Delivery of 3D data model will be by CD. |
| Digital Manufacturing Package | Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b |
| Service Agent | Service Agent Overview of all maintenance work on the machine |
| 2014 | DMG MORI | CTX beta 800 TC | |
| DMG MORI | CTX beta 800 | ||
| DMG MORI | CTX beta 800 | ||
| DMG MORI | CTX beta 800 | ||
| DMG MORI | CTX beta 800 | ||
| DMG MORI | CTX beta 800 | ||
| DMG MORI | CTX beta 800 | ||
| DMG MORI | CTX beta 800 | ||
| DMG MORI | CTX beta 800 TC | ||
| 2009 | DMG MORI | CTX BETA 800 | 14500 EUR |
| 2014 | DMG MORI | CTX beta 1250/TC | 105000 EUR | [Nov 2022] |
| 2014 | DMG MORI | CTX ECOTURN 650 | 97000 EUR | [Nov 2019] |
| 2009 | DMG MORI | CTX 310 ECO | 36000 EUR | [Oct 2020] |
| 2015 | DMG MORI | CTX 510 ECO | 105000 EUR | [Sep 2019] |
| DMG MORI | CTX 420 linear V3 | 46900 EUR | [Mar 2021] | |
| 2014 | DMG MORI | CTX ECOTURN 650 | 110000 EUR | [Nov 2019] |
