unité d’injection complète avec vis et barillet dia. 45 mm pour Battenfeld /1000 machine de moulage par injection est en bon état  ...

• plus d'information

Battenfeld HM 100/525 Injection molding machine Year: 2006 Control version: B 4 Technical details Closing force: 1000 kN Mold plate size (hxv): 680mm x 594mm Distance between columns: 470 mm x 420 mm Mold opening stroke: 500 mm Mold height min .: 250 mm Maximum ground clearance: 750 mm Hydraulic ejector - stroke: 150 mm Ejector force forward / back: 41.2 kN Injection unit Screw diameter: 40 mm Ls / D ratio: 22 Injection pressure: 2,100 bar Injection volume: 251 cm³ Shot weight, PS: 228.4 g Injection stroke: 200 mm Screw speed: 0 - 318 1 / min Plasticization rate: 30.4 g / sec. Nozzle pressure: 86 kN Electrical and hydraulic equipment Installed heating capacity: 12.1 k ...

Battenfeld TM 100/525 Année de fabrication : 2007 Unité d’injection : Diamètre de la vis : 40 mm Poids d’injection : 228,4 g Pression de pulvérisation : 2100 bar Volume de dosage : 251 ccm Unité de serrage : Force de serrage : 100 t Espacement des longerons : 420x420 mm Dimensions des plaques de serrage : 640x640 mm Éjecteur : hydraulique Unité de serrage : levier à genouillère Contrôle : UNILOG B2 Équipement supplémentaire : Euromap 67 Interface robot Traction hydraulique du noyau x 1 Contrôle avec canaux chauds x 12 L’unité d’injection est résistante à l’usure et à la corrosion Lubrification centralisée Réglage automatique de la ha ...

Fabricant: Battenfeld Type: BA 1000/525 TM Date de construction : 2002 Contrôle: Unilog B4 Force de fermeture: 1000 kN Type de fermeture : Levier de genou Rapport de barre de cravate : 420 mm x 420 mm Taille de la plaque: 640 mm x 640 mm Hauteur d’installation de l’outil : min 200 mm max 450 mm Distance d’ouverture: 330 mm Espacement des plaques max.: 830 mm Vis: 45 mm Volume de levage: 318 cc Poids de pulvérisation PS: 291 grammes PS Pression de pulvérisation: 1659 bar Généralités Moteur: 18,5 kW Chauffage: 13,8 kW Dimensions: 4,1 m x 1,3 m x 1,8 m Poids: 3900 kg Texte de l’écran: Allemand / Anglais Équipement supplémentaire Interface robot Train ...

Unité de serrage Force de serrage [kN] 1300 Dimensions des plaques de montage (hxv) [mm] 670 x 670 Dégagement entre les colonnes (hxv) [mm] 470 x 470 Min./ max. Hauteur du moule [mm] 225-500 Largeur d’ouverture maximale [mm] 930 Unité d’injection Diamètre de la vis [mm] 40 Volume d’injection [cm3] 251ccm Poids d’injection [g] 228 Pression d’injection [bar] 2100 Equipements électro-hydrauliques Puissance nominale du moteur de la pompe [kW] 18,5 Puissance des appareils de chauffage [kW] 12,1 Dimensions et poids Poids net avec armoire de commande [t] : 4,8 t Dimensions (LxlxH) [m] 4.9x1.33x2

This Battenfeld VM 150/525 R1280 Unilog B6P Injection moulding machine was manufactured in the year 2015 in Austria and has 40470 production hours. It is equipped with a BATTENFELD UNILOG B6 control unit. ...

• plus d'information

Important Note: The following description provides additional technical details about the Battenfeld TM 1300/525 M Injection Molding Machine beyond the core offer. This information is intended to assist buyers in making an informed decision. Core Offer: For professionals seeking a reliable injection molding machine, the Battenfeld TM 1300/525 M offers exceptional performance. Its specifications include: Clamping Force: 1300 kN Mounting Plate Dimensions (hxv): 670 x 670 mm Clearance Between Columns (hxv): 470 x 470 mm Min./Max. Mold Height: 225-500 mm Maximum Opening Width: 930 mm Injection Unit: Screw Diameter: 40 mm Injection Volume: 251 ccm Injection Weight: 228 g Injection ...

Control B4 1. Plasticizing system with a diameter of Ø45mm, mounted in a screw with increased homogenization of the material - with a barrier zone and an additional PMT mixer 2. (03.G04) Plasticizing unit with increased resistance to abrasion and corrosion. Applies to cylinder and worm in standard Battenfeld design (original worm is also delivered as a set). 3. (06.X17) UNILOG B4 HM Europackage consisting of: - 07.D00 setting elements, - 02.K02 air valve controlled as a function of time - 01.C01 hydraulic core control NW 6 on closing plate - 06.R02 2 Schuko 16A sockets mounted on the side wall of the control cabinet. - 06.R20 2 CEE 16A sockets mounted on the side wall of the contr ...

CONTROLS   CNC controls UNILOG B6 MOULD CLAMPING UNIT   locking force: 160 to   die opening stroke max.: 650 mm   mould height min.: 300 mm   mould height max.: 950 mm   max. distance between tool-plates: 950 mm   space between tie bars L1: 570 mm   space between tie bars L2: 520 mm INJECTION UNIT   Diameter of screw: 40 mm   Injection pressure: 2100 bar   Shot volume: 251 cm³   Shot weight max. (Polystyrol): 228 g HYDRAULIC UNIT   oil volume: 400 ltr ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / W ...

Injection molding machine by Battenfeld Wittmann. The injection molding machine is from 2018 and has been with us since the news, serviced only in Battenfeld Polska, full history, documentation. The injection molding machine has only 6600 hours of working life. Injection molding machine like new. Upper injection unit - not used, turntable - not used. screw diameter mm 30 specific injection pressure bar 2042 calculated injection volume ccm 106 screw L / D ratio 22 plasticization efficiency g / s PS 12 air injection speed - standard ccm / s 85.7 Cylinder heating system power kW 10.4 SmartPower Rotary Table Table diameter mm 750 Table height mm 140 Table weight kg 1,200 Time of ...