- Fuerza de prensado 125 t - Carrera 10 - 124 mm - Émbolo ajustable 85 mm - Velocidad de carrera 20-100 - Mesa 920 x 560 mm - Peso: 6.100 kg  ...

• más información

pressure: 75 t throat: 300 mm stroke: 8 - 110 mm table surface area: 750 x 600 mm ram adjustment: 75 mm ram surface: 430 x 230 mm hole in the table: 250 x 150 mm tool hole in ram: 40 mm no. of strokes: 60 + 90 Hub/min weight of the machine ca.: 4,4 t total power requirement: 4,5 - 6,8 kW dimensions of the machine ca.: 1,95 x 1,1 x 2,35 m distance table/ram: Hub unten, Stöß. unten 19 mm distance table/ram: Hub oben, Stöß. oben 380 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 300 mm stroke: 20 - 124 mm strokes per minute: 60/90 ram adjustment: 85 mm table surface area: 920 x 600 mm ram surface: 540 x 290 mm daylight, max. stroke above - ram adjustment above: max. 440 mm hole in the table: 290 x 170 mm tool hole in ram: Dm. 50 mm total power requirement: 6,5 - 8,5 kW weight of the machine ca.: 5,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 t throat: 295 mm stroke: 20-120 mm no. of strokes: 60/90 Hub/min ram - range of adjustment: 85 mm table surface area: 920x580 mm ram surface: 540x280 mm hole in the table: 300x180 mm table height: 830 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,1 t dimensions of the machine ca.: BxTxH 1500x2000x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 t throat: 290 mm stroke: 20-124 mm no. of strokes: 60 / 90 Hub/min ram adjustment: 85 mm table surface area: ca. 920 x 590 mm ram surface: ca. 530 x 280 mm distance table to upper part of the press: ca. 450 mm hole in the table: ca. 180 x 300 mm mm table height: ca. 750 mm tool hole in ram: Ø 50 mm Number of working hours: 8214 h distance table to upper part of the press: mm weight of the machine ca.: 5,5 t dimensions: ca. 2000 x 2000 x 2600 mm overhauled by the manufacturer Helmerding in 2014 including conversion to new ones press safety control. Operating hours read since overhaul in 2014: 8214 Documentation of press safety control available electrical grease central lubrica ...

pressure: 100 t throat: 300 mm stroke: 20 - 128 mm ram - range of adjustment: 80 mm strokes per minute: 60 - 90 table surface area: 920 x 600 mm ram surface: 540 x 290 mm hole in the table: 315 x 180 mm daylight, max. stroke above - ram adjustment above: 520 mm tool hole in ram: Dm. 50 mm total power requirement: kW weight of the machine ca.: 5,8 t dimensions of the machine ca.: 1,8 x 1,7 x 2,2 m Furnishing: - Gear transmission - fixed table - Triple bearing shaft - semi-automatic stroke adjustment - hydraulic clutch-brake combination - hydraulic overload (modern unit mounted on the stand on the left) - Hydraulic unit with oil cooler for clutch mounted on the left side of the stand - Ball sp ...

pressure: 150 t throat: 350 mm stroke: 20-120 mm no. of strokes: 50 / 75 Hub/min ram - range of adjustment: 85 mm table surface area: 1150x670 mm ram surface: 800x380 mm hole in the table: 330x200 mm table height: 800 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: BxTxH 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Prensa excéntrica fabr. HELMERDING tipo PEP 12/15 BMasch. -No: 831184, año de construcción 1988Especificaciones técnicas:Fuerza nominal: 12 tMax. Carrera del ariete: 60 mmRota: 160 mmÁrea de superficie de la mesa: 315 x 400 mmAjuste del ariete: 40 mmMax. Carrera: 180 rpm. Área de ram: 100 x 125 mmPotencia de accionamiento: 1.1 kWWith- 2 liberación manual- interruptor de pie- gabinete de control separado- Ortlinghaus freno adicional e hidráulico. Embrague multidisco- según UVVused en buen estadoPrecio bajo petición. Entrega: ex almacén o ubicación libre de carga camión. Pago: neto en el momento de la adquisición o con cita previa. Los datos técnicos no son vinculantes. Errores  ...

Prensa excéntrica hacer HELMERDING tipo EL 35 BCom.-No: 77218 Masch.-No: 5182 año de construcción 1977Especificaciones técnicas:Capacidad de presión: 35 tAjuste de golpe: 12 - 80 mmAjuste de ram: 70 mmÁrea de ram: 340 x 180 mmta de distancia más grande - carnero: 360 mmPasos por minuto: 110Juste de la mesa: 150 mmProyección: 230 mmSuperficie de la mesa: 600 x 460 mmHueso de gota en la mesa: 220 x 130 mmPeso aprox.: 2050 kgcon- Freno adicional Ortlinghausen y UVV- Mesa regulable en altura, en buen estadoPrecio bajo petición. Entrega: ex almacén o ubicación libre de carga camión. Pago: neto en el momento de la adquisición o con cita previa. Los datos técnicos no son vinculantes.  ...

pressure: 150 t throat: 350 mm stroke: 20-120 mm no. of strokes: 40-60 Hub/min ram - range of adjustment: 85 mm table surface area: 1050x690 mm ram surface: 650x320 mm hole in the table: 325x200 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8,6 t dimensions of the machine ca.: 2500x2500x2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.