Capacidad de perforación: 40 mmRota: 300 mmConcentrado del husillo: 3 MACH-id    4102 MAKE        IBARMIA España TIPO         SX 32 AÑO        1996 características técnicas Capacidad      de perforación 32 mm Capacidad de perforación acero    35 mm Capacidad de perforación de hierro    fundido 40 mm Tocando M  18 Husillo cónico Mk   3 Diámetro del husillo   125 mm Recorrido del husillo    150 mm Husillo de distancia máx. - mesa   300 mm Superficie de suelo/mesa    400 x 420 mm Potencia  &n ...

Taladro de columna prismática. Capacidad de perforación: 60mm. Mesa: 700x600mm. Recorrido vertical: 800mm. Taper Morse 4. Velocidades: 9. (50-1.084) Potencia del motor: 7,5cv.  ...

• más información

Taladro de columna prismática. Listo para taladro automático de bridas, ba... Capacidad de perforación: 70mm. Ciclo de trabajo neumático del husillo. Tabla de indexación. Transportador de virutas. Guardia del área de trabajo. Año: 1998.  ...

• más información

Boring power: 50,0 mm bore capacity in cast iron: 60,0 mm bore stroke: 230 mm thread dia.: bis M 36 M table surface area: 550 x 550 mm throat: 400 mm turning speeds: 54 - 1032 U/min morse taper: MK 4 feed: 0,1-0,2-0,3-0,4-0,5-0,6 U/min T - slots - width: 30 mm column diameter: 200 mm engine output: 4,0 kW weight: 720 kg range L-W-H: 600 x 1600 x 2450 mm Furnishing: - autom. Spindle feed by electromagnetic clutch - Switch for right / left rotation - Hardened and ground steel gears - Hand wheel for manual fine feed - Gear lubrication by autom. Oil pump - Coolant device in the machine base - machine light - rotating work table - Push button for EMERGENCY STOP - Height-adjustable chip protection ...

Boring power: 60,0 mm bore capacity in cast iron: 70,0 mm bore stroke: 260 mm table surface area: 600 x 600 mm thread dia.: bis M 42 M throat: 420 mm turning speeds: 64 - 1210 U/min morse taper: MK 5 feed: 0,1-0,2-0,3-0,4-0,5-0,6 U/min column diameter: 220 mm T - slots - width: 30 mm engine output: 5,5 kW weight: 820 kg range L-W-H: 650 x 1600 x 2640 mm Furnishing: - autom. Spindle feed by electromagnetic clutch - Switch for right / left rotation - Hardened and ground steel gears - Hand wheel for manual fine feed - Gear lubrication by autom. Oil pump - Coolant device in the machine base - machine light - rotating work table - Push button for EMERGENCY STOP - Height-adjustable chip protection ...

Drill press, bench drill, column drill, pillar drill -Manufacturer: Ibarmia, column drilling machine type 40 TF / C -Motor: Siemens 1.1 kW -Speeds: 104 - 1450 rpm, right-left rotation -Table size: 360 x 300 mm, travel 600 mm -Spindle mount: MK3 -Spindle stroke: 150 mm -Feed: automatic -Projection: 300 mm -Pillar Ø: 125 mm -Coolant device -Dimensions: 480/680 / H2220 mm -Weight: 358 kg

2013 Ibarmia ZVH 45/L1600 Extreme 4 axis vertical machining center Type: ZVH 45/L1600 Extreme Manufacturer: Ibarmia Year: 2013 Control: Fanuc X- 1600 mm Y- 800 mm Z- 900 mm Rotation angle +/-105° Maximum spindle speed 12000 rpm Number of tools in the magazine: 24 Work table dimensions: 2000 x 850 mm Included a wall that divides the table into two parts, so it is possible to machine separately in one part and clamp in the other part Machine in good condition, under power. Find more here - / Contact us at -

Oferta 24018 Características técnicas: - Capacidad de perforación en acero ST 60 28 mm - Capacidad de perforación en acero ST 60 32 mm - Soporte de husillo de perforación MK 3 - Carrera del husillo de perforación 150 mm - 9 velocidades de husillo de perforación 104 - 1400 rpm - 2 avances 0,1 / 0,2 mm/rev - Proyección: 290 mm - Mesa de distancia máxima - husillo de perforación 780 mm - Mesa con 2 ranuras en T de 480 x 400 mm - Ajustable en altura mediante cremallera con manivela - Accionamiento 400 V / 1,1 / 1,3 kW - Necesidad de espacio aprox. 600 x 2100 x 900 mm - Peso aprox. 420 kg - con: - Derecha – En sentido contrario a las agujas del  ...

bore capacity in steel (diameter): 25,0 / 30,0 mm throat: 150 mm bore stroke: 120 mm threading: M18 / M22 spindle taper: 3 MK table:: 300 x 270 mm turning speeds: 200 - 4.000 U/min column diameter: 100 mm total power requirement: 0,75 / 1,1 kW weight: 170 kg range L-W-H: 800 x 500 x 1400 mm from a training workshop () New price approx. 4.700 euros Furnishing: - robust bench drill with V-belt drive - Clamp / relax using a quick release lever - stepless speed adjustment - digital speed display - EMERGENCY OFF push button at the front - stable feed handle - stable quill for tool mounting - Thread cutting device - Right / left running of the work spindle - Pole changing motor - manual spindle  ...

The machine is in good technical condition, after agreement the possibility of testing. Machine parameters: Feed in the X axis 1600 mm Feed in the Y axis 800 mm Feed in the Z axis 900 mm Angle of rotation +/- 105 ° Maximum speed 12000 rpm Number of tools in the magazine: 24 Dimensions of the work table: 2000 x 850 mm. It is designed for customers where it requires a vertical spindle as well as high speed and is the perfect solution with all the benefits it provides: - High speed range and high torque - High position dynamics and high acceleration in the axes - Limited working space: maximum comfort and safety - Vertical protection up to the roof in the X axis: optimizes the removal of chips ...