| Descripción: |
Cepilladoras de cuatro lados WEINIG Powermat 500 2 rechte Spindel
máquina usada
Number of spindles: 6 St.
Working width: 230 mm
Working
height: 120 mm
Length of the planing table: 2500 mm
Feed
motor: 5 kW
Feed speed: 5-30 m/min.
Control: Weinig PowerCom
Weinig Powermat 500 with 2 right
spindles
---------------------------------------------
The
machine is completely checked in our warehouse
Brief
summary:
--------------------------------------------
6
spindles (2 of them right) with 8,000 rpm and 6 x
HSK/Powerlock
Axially and radially CNC-controlled
spindles
Large Powercom control with touchscreen
Vario hoods
on spindles 3 and 5
Detailed
description:
--------------------------------------------
Tool
arrangement no. 019
Technical
data:
---------------------------------------------
Working
width 20 - 230 mm (with tool flight circle 93 - 125 mm)
Working
height 8 - 120 mm (with tool flight circle 93 - 125 mm)
1.
Tool holder
POWERLOCK/HSK
---------------------------------------------
Fi
rst lower tool holder
Motor with brake 7.5 KW
Speed 8,000
rpm
including high-performance ball bearings
Tool flight
circle 125 - 180 mm
In conjunction with PowerLock 93 - 180
mm
Axially adjustable range 17 mm
Folding
device
MarathonCoating in front of 1st lower tool
holder
2nd tool holder
POWERLOCK/HSK
---------------------------------------------
Fi
rst right tool holder
Motor with brake 5.5 KW
Speed 8,000
rpm
including high-performance ball bearings
Tool flight
circle 93 - 200 mm
Maximum throat depth 35 mm
Axially
adjustable range for spindle 80 mm
Axially adjustable range for
PowerLock 55 mm
Radial adjustable range
Min. tool diameter at
stop level 93 mm
Max. tool diameter behind Stop level 200
mm
3. Tool holder
POWERLOCK/HSK
---------------------------------------------
Fi
rst left tool holder
Motor with brake 7.5 KW
Speed 8,000
rpm
including high-performance ball bearings
Tool flight
circle 93 - 200 mm
Tool flight circle for straight cutter heads
max. 163 mm
Maximum throat depth 35 mm
Axially adjustable
travel for spindle 80 mm
Axially adjustable travel for PowerLock
55 mm
Pressure shoe in front of left tool holder,
including 2
side pressure rollers, spring-loaded
Vario hood (2
axes):
Central adjustment of the pressure and guide elements in
front of and behind the left
tool holder including electronic
digital display
Axially and radially
CNC-controlled
4. Tool holder
POWERLOCK/HSK
---------------------------------------------
Se
cond right tool holder
Motor with brake 5.5 KW
Speed 8,000
rpm
including high-performance ball bearings
Tool flight
circle 93 - 200 mm
Maximum throat depth 35 mm
Axially
adjustable spindle 80 mm
Axially adjustable PowerLock 55
mm
Radial adjustable spindle
Min. tool diameter on stop plane
93 mm
Max. tool diameter behind stop plane 200 mm
Axially and
radially CNC controlled
5. Tool holder
POWERLOCK/HSK
---------------------------------------------
Fi
rst upper tool holder
Motor with brake 11.0 KW
Speed 8,000
rpm
including high-performance ball bearings
Maximum throat
depth 35 mm
Axially adjustable spindle 40 mm
Split pressure
shoe in front of upper tool holder on tool flight
circle
adjustable and swiveling away from the tool,
pneumatically
Vario hood (2 axes):
Central adjustment of
the pressure and guide elements in front of and after upper
Tool
holder including electronic digital display
Axially and
radially CNC controlled
6. Tool holder
POWERLOCK/HSK
---------------------------------------------
Se
cond lower tool holder
Motor with brake 5.5 KW
Speed 8,000
rpm
including high-performance ball bearings
Tool flight
circle 93 - 225 mm
Maximum throat depth 15 mm
Axially
adjustment range 40 mm
Radial adjustment range
Min. tool
diameter to table level 93 mm
Max. tool diameter 6 mm below table
level 225 mm
Axially and radially CNC controlled
All tool
holders with high concentricity.
Lubrication points for the axial
tool holder movement.
Feed
system
----------------------------------------------
Frequenc
y-controlled feed, 5 - 30 m/min.
continuously adjustable with
brake 5 KW
Feed roller in front of 1st lower
tool
pneumatically high-low controlled
Durofer pointed tooth
rollers (Weinig patent)
with depth limiter and
self-cleaning
Adjustment path of the feed rollers
opposite
left tool holder, axial 35 mm
Machine
electronics
--------------------------------------------
Opera
ting voltage 400 volts
(voltage range 380 x 420 volts), 50
Hz
Electrical design according to DIN VDE 0113,
electrical
equipment of industrial machines
EN60204, IEC-204-1. Other
electrical regulations
are not taken into account. Control cabinet
(with control panel) separate from
machine, distance control
cabinet-machine: 2.5 m
Distance control panel - control cabinet:
3.5 m
Machine stand, table and
stops
---------------------------------------------
Surface
table 2.5 m long (incl. joint ruler)
Manual Waxilit pump for
removing resin from the table.
One driven roller in the outfeed
table,
210 mm wide, hardened
One driven roller in the machine
table,
210 mm wide, hardened
Pressure rollers and G41212123
guides
---------------------------------------------
Pressure
rollers from above, spring-loaded
Pressure rollers can be swiveled
away from above, opposite the right-hand tools
for easy tool
changing
Machine
operation
---------------------------------------------
PowerC
om, touchscreen
Profile and tool data management
software
Setting values can be calculated or saved. These are
shown on the electronic double displays.
Touchscreen function for
graphically supported operation
10,000 profile and tool storage
spaces each
integrated network card for connection to OptiContro
or other PCs
USB connection for manual data backup
4 axial
CNC-controlled adjustment and positioning of the tool holders
in
conjunction with PowerCom, spindle no. 3,4,5,6
4 radial
CNC-controlled adjustment and positioning of the tool holders
in
conjunction with PowerCom, spindle no. 3,4,5,6
CNC-controlled
adjustment and positioning of the feed up/down
in conjunction with
the PowerCom
Central position of lubrication points on the front
of the machine
Safety and sound
insulation
----------------------------------------------
Full
safety cover
Easily foldable safety hood with window covers the
entire work area and protects against mechanical
hazards.
When
the safety hood is raised, the tool holders
and feed are
automatically switched off. With the CE version, it is not possible to
open the safety hood during
automatic
operation.
Electromagnetic locking of the safety hood
(the
hood can only be opened after the tools have stopped, approx. 15
seconds)
The machine is delivered with the CE mark and the
associated
EC declaration of conformity.
Improved sound
insulation of the full safety cover
An interior light in the
safety hood
For cutting work, e.g. sawing and multiple
profiling,
you need suitable protective
devices.
---------------------------------------------
Op
tion: existing
tools
---------------------------------------------
Option:
Weinig / Neumann RF 24 workpiece return system, stock number
2771
---------------------------------------------
(techn
ical data according to the manufacturer - no
guarantee!)
The data for this ad was created
with ModulMWS - the software solution of LogoTech
oHG.
seller offer No. resale 1305-2770
|