Heat and Power Plant with an Absorption Chiller An 850 kW combined heat and power plant with an absorption chiller. The systems ran perfectly until the end and all maintenance was carried out. No damage is known. The CHP ran for 51,429 hours of operation. The absorption chiller has run for 42,350 hours. The following components use an overhauled long block or completely overhauled. The components relevant to assemblies for "modernization" were marked: - complete panelling - Interfaceschronk - Oil relubrication pump Mechanically overhauled and electrically tested - Oil level monitoring - Plotter heat exchanger" - Pressure expansion foll3 (if present) - Pressure transducer and t ...

Working range X/Y: 1500mm/3000mm, punching force: 30t, max. material thickness (punching): 8mm, max. working speed X/Y: 150m/min, tool stations: 21, multitool stations: 3, max. workpiece weight: 200kg, control: Siemens Sinumerik 840D. Including stacking unit (STS) and loading tower (Combo Tower). Documentation available. On-site inspection is possible.

Working range X/Y: 1500mm/3000mm, punching force: 30t, max. material thickness (punching): 8mm, max. working speed X/Y: 150m/min, tool stations: 21, multitool stations: 3, max. workpiece weight: 200kg, control: Siemens Sinumerik 840D. Including stacking unit (STS) and loading tower (Combo Tower). Documentation available. On-site inspection is possible.

Carel HeaterHumidificador de vapor isotérmico UR020HL10S Carel HeaterSteam UR020HL10S es un humidificador de vapor isotérmico. Produce vapor calentando elementos calefactores sumergidos en un cilindro de vapor lleno de agua. Esto puede ser agua del grifo normal o agua completamente desmineralizada. El calor generado por los elementos calefactores calienta el agua hasta una temperatura de 100 ° C. Características técnicas: Dimensiones: (L x W x H): 690 x 438 x 887 mm Peso: 63 kg Salida de vapor: 20 kg/h Potencia: 15 kW Alimentación: 400 V/3 Presión de vapor: 0...3600 Pa Conexión de vapor: 40 mm Conexión de suministro de agua: 3/4inchG exterior ¡Más artícul ...

including accessories and table, dimensions: L 60 x W 60 x H 82 cm ...

• más información

including accessories and table, dimensions: L 60 x W 60 x H 82 cm ...

• más información

including accessories and table, dimensions: L 60 x W 60 x H 82 cm ...

• más información

including accessories and table, dimensions: L 60 x W 60 x H 82 cm ...

• más información

Wire heating machine (From a Plant for fire aluminizing steel wire) Wire heating is inductive, 12 wires are heated simultaneously by a coil. The frequency of the inductor is tuned to 12 wires. To prevent interference with the HF generator, at least 10 wires must be moved within the coil. Inside the inductor, the wires are guided through 12 ceramic tubes which are mounted inside the induction coil. The ceramic tubes prevent contact with the coil. To prevent the ceramic tubes from breaking, the wires should be guided through the tubes as centred as possible. The wires are heated to coating temperature inside the inductor and the temperature is measured using a radiation thermometer (pyrome ...

Unidades Disponibles : 2 Fabricante: GEA-TDS Ahaus Modelo: VTE 54-2.0 Año : 2015 Tipo : Intercambiador de calor tubular Tipo de fluido : gas / vapor / fluidos sobrecalentados Materiales : Acero inoxidable 316L Superficie de intercambio: 4,4 m2 Volumen A : 12.5 L Volumen B: 18,3 L Temperatura A: 150? C min Temperatura B: 190? C máx. Presión A: 23 bares Presión B: 12 bares   Longitud: 200 cm ¿Diámetro:? 22 cm