máquinas para el procesado de metales / fresadoras / Fresadoras de consola verticales
Fabricante: DMG MORI
Modelo:HSC 75 linear
Tipo de máquina: Fresadoras de consola verticales
Número de artículo: 166192447
Cantidad: 1
Fecha: 08.01.2025
Ubicación:
Alemania
Precio:
Seller-item-No.:055088
| General | |
| HSC-Precision Centre - Active chiller for main spindle and linear drives - Active chiller for electrical cabinet - Direct absolute measuring system with air purge - scraper-type chip-conveyor and bed-flushing; Control: 3D-control Heidenhain iTNC 530 HSCI | |
| Technical Data | |
| Spindle taper | HSK-A 63 |
| Feed rate longitudinal/transverse/vertical | 1-90000/1-90000/1-90000 mm/min |
| Rapid traverse longitudinal/transverse/vertical | 90/90/90 m/min |
| Working area 1 | |
| Longitudinal | 750 mm |
| Cross | 600 mm |
| Vertical | 560 mm |
| Tool changer | |
| Application | Vertical |
| Type of magazine | Wheel |
| Type of gripper | Pick up |
| Number of tools | 30 |
| Floor space/Weight | |
| Dimensions (L x W x H) | 6,65 x 7,6 x 3,18 m |
| Weight approx. | 12000 Kg |
| Splash guard equipment/cabin | Splash guard equipment/cabin with illumination and sliding doors on operators side and front side |
| Motor spindle with HSK-A 63 | Drive power (100% DC) 25 kW |
| Drive power (40% DC) 35 kW | |
| Speed range - 18.000 rpm | |
| Spindle taper HSK-A 63 | |
| HSC75 linear 5-Axis Specification | HSC 75 linear 5-Axis Specification clamping area Ø 750 mm, Ø 29.52 inch Tilting range B-axis +10/-110°; C-axis 360° Table load max. 800kg / 1763 lbs Absolute Measuring systems incl. permanent cooling of B- and C-axis motor |
| Production package for high swarf volume with ICS | Production package for high swarf volume ICS with paper type D5152871 filter 40 bar / 23 l/min / 980-l tank / 580 psi/ 6 gallon/min / 258.9 gallon incl. swarf conveyor, scraper type with wedge wire screen extended swarf flushing, rotating clear view window coolan |
| Monitoring lamp, 4 colours | Monitoring lamp, four colours Red: general error Yellow: intervention necessary Green: automatic mode Blue: set-up mode |
| Application Tuning Cycle ATC-Software | Application Tuning Cycle ATC-Software Selection of the optimal milling mode for the next machining-step |
| 3D Quick SET | 3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe) |
| Tool laser measuring Renishaw | Laser tool measuring Renishaw for tool length and diameter including calibration tool |
| Internal air blast cooling | Air blast cooling through the centre of spindle, selectable by M-function or soft key |
| Oil and Emulsion Mist Separator | Oil- and emulsion mist separator capacity 600m³/h, 0.5kW respective 21,189ft³/h, 0.7hp |
| DMG MORI Netservice - client | DMG MORI Netservice - client Qualified support by Internet-based remote diagnostics Will be installed on an external PC! |
| DMG MORI | HSC 55 linear | ||
| DMG MORI | HSC 55 linear | ||
| DMG MORI | HSC 70 linear | ||
| DMG MORI | HSC 75 linear | ||
| DMG MORI | HSC 55 linear | ||
| 2011 | DMG MORI | HSC 55 linear | |
| DMG MORI | SPEED 32|10 linear | ||
| DMG MORI | DMC 60 H linear | ||
| 2014 | DMG MORI | DMU 80 EVO LINEAR | |
| 2011 | DMG MORI | ULTRASONIC 20 linear |
| DMG MORI | CTX 420 linear V3 | 46900 EUR | [Mar 2021] |
