Descripción: |
Copy Milling Machines DMG MORI GMX 300 linear
General |
Turning-milling centre - partial hollow
clamping device - drawtube ID 68 mm - C-axis and spindle brake
(hydraulically) - upper compound slide with turning-/ milling
spindle, reception HSK-A63, DIN 69893 with 3-fold Hirth-coupling
1°-Indexing to lock the spindle during turning operations - Y-axis
- B-axis interpolating with hydraulically locking - tool magazine 1
x 60-fold, shelf magazine with tool changer and handling unit,
additional 4 tool loading stations; Control: Sinumerik 840D
powerline |
|
Technical Data |
Drive power (100% DC) |
13,2 kW |
Drive power (40% DC) |
22 kW |
Torque (40% DC) |
100 Nm |
Speed range |
20-12000 rpm |
B axis, slide 1 |
Swivelling range |
+/- 120 degree |
Slide 3 |
Transverse stroke |
1500 mm |
Rapid traverse Z |
36 m/min |
Slide 2 |
Longitudinal stroke |
1400 mm |
Transverse stroke |
225 mm |
Rapid traverse X |
24 m/min |
Rapid traverse Z |
40 m/min |
Slide 1 |
Longitudinal stroke |
1585 mm |
Transverse stroke |
550 mm |
Y axis, vertical |
+/- 110 mm |
Rapid traverse in X |
40 m/min |
Rapid traverse in Z |
60 m/min |
Rapid traverse in Y |
24 m/min |
Main drive 2 |
Drive power (100% DC) |
25 kW |
Drive power (40% DC) |
37 kW |
Bench speed |
900 rpm |
Speed range |
-5000 rpm |
Max. torque (40% DC) |
370 Nm |
C-Axis Speed |
-5000 rpm |
Torque of C-Axis (holding torque) |
390 Nm |
Main drive 1 |
Drive power (100% DC) |
25 kW |
Drive power (40% DC) |
35 kW |
Speed range |
-5000 rpm |
Bench speed |
900 rpm |
Max. torque (40% DC) |
370 Nm |
C-Axis Speed |
-5000 rpm |
Torque of C-Axis (holding torque) |
390 Nm |
Work spindle (right) |
Spindle nose |
Flat flange |
Diametre of spindle nose |
170h5 mm |
Spindle bore |
79 mm |
Spindle capacity |
65 mm |
Spindle diametre on front bearing |
120 mm |
Work spindle (left) |
Spindle nose |
Flat flange |
Diametre of spindle nose |
170h5 mm |
Spindle bore |
79 mm |
Bar diametre |
65 mm |
Spindle diametre on front bearing |
120 mm |
Working area |
Swing diameter over guide ways |
640 mm |
Distance between spindles |
1930 mm |
Floor space/Weight |
Dimensions (L x W x H) |
9,3 x 4,6 x 3,05 m |
Weight approx. |
20000 Kg |
Standard equipment 1 |
- upper compound slide with turning-/
milling spindle, reception HSK-A63, DIN 69893 with 3-fold
Hirth-coupling 1°-Indexing to lock the spindle during turning
operations - absolut, direct measuring systems in all linear
axes |
Standard equipment 2 |
- chip conveyor, - cooling pump 8 bar (116 psi);
20 l/min (5.28 gal/min) - V24 and Ethernet-interface |
Clamping with balanced pressure, main
sp. |
Balanced pressure clamping device for the main
spindle |
Clamping with balanced pressure,
sub-sp. |
Balanced pressure clamping device for
sub-spindle |
Hollow clamping device mainspindle, Ø 68
mm |
Hollow clamping device at the main spindle (left)
boring Ø68 mm (2,67 inch) |
Lower compound slide w. tool drive a.
turret |
star type turret, 12-fold with tool drive,
reception 40 mm (1.575 inch) DIN 69880, radial - Lower compound slide
(X2, Z2), AC servo drives with ball screws, absolute, direct
measuring system |
Torque limiters clutches
X1-,Ys-,X2-,Z2-,Z3-axis |
Overload clutches for X1-, Ys-, X2-, Z2-, Z3-axis
for machine with subspindle and above slide |
Subspindle ISM 65 for GMX 300 Linear |
subspindle for GMX 300 Linear as integrated
spindle motor ISM 65 - drive power 25/37 kW (33/49 hp) - partial
hollow clamping (hydraulical) - draw tube ID 66 mm (2.6 inch) - C-axis
and spindle break (hydraulical) |
Tool magazine 120-fold, HSK-63A |
Tool magazine 120-fold, tool reception HSK-63A DIN
69893 remark: while putting in manually tools into the loading
stations the tool changer cannot reach the tools in the tool stations
no. 105 - 120 |
Automatic doors made Landert |
Automatic doors, made Landert |
Short bar loading magazine, IRCO, ILS-RBK
100/16 |
Short bar loading magazine, make IRCO ILS-RBK
100/16 max. bar dia. 100 mm (3.93) front loading, shift to left |
|
|
|
|
seller offer No. resale 190068
|