| NC-swivel head (B-axis) |
Controlled NC-swivel milling head (B-axis)
with clamping in position. Continuously positioning NC swivel milling
head with integrated motor spindle for 4/5 axes positioning and
simultaneous machining. Swivel range: +/- 120° Swivel speed: 50
rpm |
| Spindle speed 12,000 rpm, 430 Nm |
Motor spindle powerMASTER SK50 Spindle speed 20 -
12.000 min-1 for tool holder according to DIN ISO 7388-1-A50 Output
52/42 kW (69.7/56.3 hp) Torque 430/300 Nm (318.2/222 ft lbs) (40/100%
duty cycle) Tool magazine 30 places SK50 At speed 10,000-12,000
min |
| Fixed table |
Fixed Table |
|
Table surface 4600 x 1100 mm |
| Direct measuring system |
Direct path measuring system |
| Cabine |
Full protection cabin |
| Tool magazine 50 places |
Tool magazine 50 places SK50/HSK-A100 Chain type
with double gripper |
| NC-subtable 700-1, A-axis, left working
area |
NC-sub table 700-1 (A-axis) Left working area |
| Removable partition wall DMF |11 |
Partition wall removable for pendulum machining, 2
working spaces |
| Infrared measuring probe PP60
optical |
Infrared touch Probe for ISO 50 make Renishaw PP
60 optical (OMP 60) Tool taper suitable for the spindle |
| 3D quickSET elevated constructuion |
3D quickSET Tool kit for control and compensation
of the cinematic accuracy of 5 axis machine configurations include
additional fixture for elevated construction (only with option touch
probe) |
| Tool measuring Heidenhain TT160 |
Tool measuring device Heidenhain TT160 Tool length
and diameter measurement with cleaning air-blast, Calibration Tool
with tool holder (not with Laser possible, for pendulum machining
please order 2 pieces) |
| Inner coolant supply 40Bar/980l |
Internal coolant supply (ICS) with paper type
filter 40 Bar/980 l // 580 psi/258.8 gallon inclusive 2 rotating clear
window, air purge for linear measuring system, rotary joint for main
spindle |
| Air blast through spindle centre |
Air blast through spindle centre activated by M
function, maintained air, low oil rate possible |
| Oil mist separator |
Oil and emulsion mist separator system D41252871
2 pieces per machine implemented in right and left cabin side wall.
mechanical filter system 2x1600 m³/h |
| Sensor package i4.0 |
Sensor package i4.0: MPC Machine Protection
Control SGS Spindle Growth Sensor ICS flow sensor |
| Signal lamp 4-colour |
Signal lamp, 4 colours |
| Door drive for working area doors |
Door drive for working area doors Open / close -
activated by two-hand-operation at the control panel Safety sensor
technology for prevention of accidents |
| Operation mode 4 |
Operation mode 4 Process monitoring in the
production Manual intervention with open doors of machining area.
Release after check list has been filled in. |
| ATC (Application Tuning Cycle) |
ATC (Application Tuning Cycle) programmable feed
parameter selection for machining task: accuracy/surface/speed |
| Digital Manufacturing Package |
Digital Manufacturing Package (1) IoTconnector
Allows the use of the Online services from DMG MORI (2) Machine Data
Connector (MDC) Standardized machine data interface Protocols: OPCUA,
MTConnect, MQTT (3) NETservice Qualified support through
internet-b |
| Messenger V4 |
The latest version of DMG MORI Messenger displays
web based the machine live status. It allows to analyze the machine
run-time, downtime, alarms in individually configurable dashboards
and transparently shows the actual status in the manufacturing
shop |
| Special equipment |
Trade fair design Green Mode, consisting of:
-Brake Energy Recovery -LED lights -Adaptive Feed Control -Advanced
Energy Monitoring -Air Leakage Monitoring Chip conveyor with elevated
discharge 1250mm |