| Direct measuring system |
Direct path measuring system |
| Spindle speed 20.000 rpm |
Motor spindle speedMASTER® HSK-A63 Spindle speed
20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm /
86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) |
| NC swivel rotary table |
Swivel Rotary Table for simultaneous machining
Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to
+110°, rotary axis 360° including direct measuring system for B- and
C-axis and working plane transformation |
| Tool magazine 60 pockets |
Tool magazine 60 places HSK-A63 Vertical chain
with double gripper incl. set up station for tool loading |
| Swarf conveyor, with cleaned slot
screen |
Swarf conveyor, scraper type with cleaned slot
screen |
| Internal coolant supply 40bar/600l |
Internal coolant supply (ICS) with paper type
filter, 40 bar/23 l/min / 600-l tank 580 psi/6 gallon/min /160 gallon
incl. cabin roof, rotary joint in spindle, double cartridge filter
50µm for internal coolant (differently from standard) |
| Coolant-air blast change-over |
Coolant - Air-blast changeover external switchable
via M-Function |
| Air blast through spindle centre |
Air blast through spindle centre activated by M
function, maintained air with low oil rate |
| Chip flushing for working area |
Chip flushing for working area rinsing line on the
right side panel, backside of machine bed, cabin left and right
activated or deactivate by M function´s (only in combination with
internal coolant supply, not with 20 bar ICS) |
| Double cartridge filter, 25 µm |
Double cartridge filter, Finesse of filtration 25
µm, manually reversible (only in connection with separate paper-type
filter) |
| Rotating clear-view window |
Rotating clear-view window (only available with
option cabin roof) |
| Oil- and emulsion mist separator
mechanical |
Oil and emulsion mist separator mechanical filter
system 1100 m³/h (only available with option cabin roof) |
| 3D Quick SET |
3D quickSET Tool kit for control and compensation
of the cinematic accuracy of 5 axis machine configurations (only with
option touch probe) |
| MPC Machine Protection Control |
MPC Machine Protection Control Machine protection
by quick shutdown |
| Signal lamp 4-colour |
Signal lamp, 4 colours |
| SCHUNK Automation Interface PH 150 / PH
CELL |
Automation interface PH 150 / PH CELL for SCHUNK
zero point clamping system consisting of: Interface (Profibus) via M65
Working table with 4-channel rotary joint Automatic loading door
Control of SCHUNK NSE VERO-S Zero-point clamping system Automation
Sof |
| Exhibition design DMU50 3rd D41152871
generation |
Exhibition design DMU 50 3rd chiller of electrical
cabinet painted in electrical cabinet color; lighting of tool
magazine; DMG-MORI set of labels; paper version of electrical
plan |
| Safety package for power failure (incl.
IPC) |
Safety package for power failure: Package for
power failure IPC CELOS (for proper shutdown of IPC); Overload
limiter, Undervoltage monitoring with fast deceleration control |
| Operation mode 4 |
Operation mode 4 Process monitoring in the
production Manual intervention with open doors of machining area.
Release after check list has been filled in. |
| ATC (Application Tuning Cycle) |
ATC (Application Tuning Cycle) programmable feed
parameter selection for machining task: accuracy/surface/speed |
| 3D data model |
3D data model in STEP format for integration in
CAD System by the customer. It is used for machine simulation.
(shipping against signed non disclosure agreement) |
| Digital Manufacturing Package |
Digital Manufacturing Package (1) IoTconnector
Allows the use of the Online services from DMG MORI (2) Machine Data
Connector (MDC) Standardized machine data interface Protocols: OPCUA,
MTConnect, MQTT (3) NETservice Qualified support through
internet-b |
| Messenger V4 |
The latest version of DMG MORI Messenger displays
web based the machine live status. It allows to analyze the machine
run-time, downtime, alarms in individually configurable dashboards
and transparently shows the actual status in the manufacturing
shop |
| Service Agent |
Service Agent Overview of all maintenance work on
the machine |
| Special equipment |
- OPC UA interface for PH Cell TWIN - Control
panel arm control for PH Cell TWIN - Standard installation elements
Renishaw Blue Power Probe Kit consisting of: Infrared PP 60 optical
probe and Laser tool measurement Renishaw NC4 blue |
| Special equipment |
Green Mode bestehend aus: -Brake Energy Recovery
-LED Lights -High Efficient Chillers -Advanced Auto Shutdown -Adaptive
Feed Control -Frequency-Controlled Pumps -Zero Sludge COOLANT Gear
Shaping Cycle |