máquinas para el procesado de metales / fresadoras / Fresadoras de consola universales
Fabricante: DMG MORI
Modelo:DMP 35
Tipo de máquina: Fresadoras de consola universales
Número de artículo: 166192358
Cantidad: 1
Fecha: 09.01.2025
Ubicación:
Alemania
Precio:
Seller-item-No.:051095
| General | |
| High dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate | |
| Working area 1 | |
| Longitudinal | 350 mm |
| Cross | 420 mm |
| Vertical | 380 mm |
| Technical Data | |
| Feed rate longitudinal/transverse/vertical | 60000/60000/60000 mm/min |
| Rapid traverse longitudinal/transverse/vertical | 60/60/60 m/min |
| Main drive | Drive power (100% DC) 6 kW |
| Drive power (40% DC) 8,5 kW | |
| Torque (100% DC) 41 Nm | |
| Torque (40% DC) 48 Nm | |
| Speed range 20 - 15000 rpm | |
| Spindle taper BT 30 | |
| Clamping System ISO 7388-3 - JD30 | |
| Integrated swivel rotary table simultaneous | Integated swivel rotary table DMP 35 version 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Rotary joint, 4-channels Inclusive So |
| Rotary joint, 6 channels | Rotary lead through for integrated swivel rotary table with torque drives 6- flute, 2x for air, 4x for oil Including fix plate and fast coupling at machine side |
| Tool magazine 25 places | Tool magazine 25 places (suitable for inclusion in the tool spindle) Max. tool length 150 mm Chip-to-chip time 1.6 sec Note: machine width increases to 1410 mm! |
| Production package band filter ICS 40bar | Paper band filter ICS 40bar includes: Paper band filter 40bar/ 23l/min Additional tank 600l Chip conveyor useable for fine chips (self cleaning slotted filter) Discharge height: 600mm; Tank volume 200l Flushing in working room Spray gun for swarf removal |
| Air blast through spindle centre | Air blast through spindle center via M-Command; maintained air with small Oil portion Due to needed lead through in main spindle only with swarf removal package ICS possible! |
| RENISHAW touch probe-Kit | RENISHAW measuring suitable to tool taper System in Spindle OMP40-2 touch probe with optical signal transmission OTS wireless probe with air purge on machine table OMI-2T optical transmission module Plastic carrying case Calibration tool incl. tool holder |
| Preparation 3D Quickset | Machine preparation for use of the 3D quickSET Toolkit. included is the Softwareoption for 3D quickSET for one machine. 5 axis machine configurations (only with option touch probe) |
| proTIME | proTIME Visualisation of remaining runtime, remaining workpieces and the machine state |
| Signal lamp 4-colour | Signal lamp, 4 colours |
| Automation Interface WH CELL right | Automation interface right for WH CELL / WH FLEX Interface (Profibus) via M65; Automatic loading door right; Working table with 4-channel rotary joint; 4-chanel enegry supply to machine table for (3-Axis-Machines); Only in combination with an additional c |
| Price reduction for automation from DMG MORI | Price reduction on automation interface with simultaneous order of a DMG MORI Automation solution |
| Operation mode 4 | Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in. |
| Digital Manufacturing Package | Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b |
| Messenger V4 | The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop |
| Workpiece loading & unloading system WH 3 CELL | Workpiece loading & unloading system WH 3 CELL with 6-axis industrial robots and workpiece carrier storing system (paternoster); maximum possible workpiece weight of 3 kg, maximum workpiece size 100 x 100 x 50 mm Robot FANUC LR Mate 200 iD/7L D5152871 PROFIBUS in |
| Pneumatic pallet pusher - robot side | Pneumatic cylinder installed on the robot side for slide over individual workpiece pallets within the paternoster system. |
| Menu-driven input programming | Menu-driven input programming Control extension in addition to the Teach programming; Process definition by entering parameters; Separate intuitive user interface; |
| Robot FANUC LR Mate 200 iD/14L | Robot FANUC LR Mate 200 iD/14L for Load capacity extension up to 14 kg transfer weight (deviating axis speeds to robot FANUC LR Mate 200 iD/7L!) |
| WH 3 CELL Integration kit for DMP 35/70 | WH 3 CELL Integration kit for DMP 35/70 Machine-specific adaptation for the protective housing on one DMP 35/70 |
| Dual gripper PGN 80 (without gripper fingers) | Dual gripper Type Schunk PGN 80 with 8 mm travel per jaw (gripper fingers not included!) |
| Gripper quick-change system 2 gripper | Gripper quick-change system for dual gripper |
| Workpiece carrier standard | Workpiece carrier standard - plastic 15 Workpiece carrier 600x400 (workpiece specified inlay´s not include) |
| SPC drawer | SPC drawer (only to be removed) Output of a trial workpiece for process control |
| Turning station (without gripper fingers) | Turning station includes 1 gripper, type depending on the selection and rotary module 0° / 180° (gripper fingers not included!) |
| Alignment station | Alignment station for exact positioning of the workpiece in the gripper. |
| Robot Teachset | Robot Teachset for the new creation of workpieces / workpiece carriers as well as for the basic adjustment of the robot and / or gripper. |
| Not OK discharge via slide | Not OK discharge via slide Removal of bad parts after machine signal |
| Special equipment | 1 set of gripper jaws for turning station Design analogous to gripper jaw set PGN+80 2 sets of gripper fingers for gripper unit Design analogous to gripper jaw set PGN+80, suitable for gripper unit and quick-change gripper finger system 1 piece workpiec |
| 2017 | DMG MORI | CLX 350 V3 | 75000 EUR | [Aug 2019] |
| 2017 | DMG MORI | CLX 350 | 57620 EUR | [Jul 2023] |
