| Descripción: |
Plantas de reciclaje CROSS WRAP OY LTD., SIILINJäRVI, FINNLAN DW 1400
máquina usada
For sale is an almost new bale opener line from a paper recycling
plant for the production of ?fluff pulp? (long-fibre cellulose) from
unmixed paper and cardboard production waste.
The entire system
was newly installed in 2021 and unfortunately never went into
production. In 2024, the final decision was made to dismantle the
entire system technology and sell parts of it.
The resulting bale
opener line only ran for approx. 2 hours in set-up mode after
installation and never went into production. The system was designed
for a throughput of 20 tonnes of fluff pulp per
hour.
Technical data on the used bale feed
conveyor:
Manufacturer Bollegraaf Recycling Solutions
B.V.
Type HBT 1400/1200 12500 - 0° (chain belt
conveyor)
Overhaul of the conveyor belt in 2021
Operating
hours after overhaul approx. 2 hours
Effective width 1200
mm
Belt length 10,150 mm
Drive power 3 kW, the belt speed of
the motor can be regulated via a frequency converter
Belt speed
1.6 - 5.5 m/minute
Belt type 250/2, 3+1, thickness 6.1 mm, the
belt is without carrier
Remark:
The bale feed conveyor
(chain belt conveyor) is used. The original year of manufacture is not
known. The conveyor was overhauled in 2021. After the overhaul and
assembly, the conveyor belt has only been in operation in set-up mode
for approx. 2 hours. The infeed conveyor serves as a supply store for
the bale opener and dewiring unit and can store bales over a length of
10 metres. The chain belt conveyor is controlled via the DW 1400 cross
wrap dewiring unit. Whenever a bale is opened, dewired and fed to the
feed hopper, a new bale is automatically fed from the feed
belt.
Technical data for the bale opener and dewiring
unit:
Manufacturer Cross Wrap OY
Type DW 1400 dewiring
unit
Year of manufacture 2021 (new machine)
Operating hours
approx. 2 hours (exclusively set-up operation by the manufacturer
Cross Wrap)
Min./max. permitted bale dimensions:
Height min.
700 mm, max. 1400 mm
Width min. 700 mm, max. 1400 mm
Length
min. 1100 mm, max. 2500 mm
Bale weights min. 250 kg, max. 2000 kg
Bale materials Paper, cardboard, plastic films, plastics, pulp
and various other recycling materials
Throughput capacity up to
60 bales per hour, depending on material
Remark:
The bale
opener and dewrapper is a new machine, built in 2021 and was operated
exclusively by the manufacturer Cross Wrap for approx. 2 hours in
set-up mode. The system works fully automatically. Bales are held on
the infeed conveyor belt by two hydraulically operated grippers. The
bale opener follows the contour of the bale and automatically cuts
through the wrapping film and the steel or plastic bale wires with a
hydraulically driven, rotating knife. The hydraulically driven gripper
system holds the film with the steel or plastic bale wires and pulls
them out sideways after the opening process. Finally, the wires and
film are wound into small coils via a winding unit and ejected into a
box via a side chute. Once the bale has been opened and the film and
wire removed, it is discharged into the storage bunker with a dosing
drum using a conveyor belt. It is then broken down into several
pieces.
Technical data for the ?steel lamella conveyor?
(steel plate conveyor), feed hopper with dosing drum:
Manufacturer
Bollegraaf Recycling Solutions B.V.
Type Drumfeeder BDF
1200/200011000
Year of construction 2014, overhauled in
2021
Operating hours after overhaul approx. 2 O4951246 hours
(set-up operation only)
Drum width 2000 mm
Drum diameter 1360
mm
Drum drive power 15 kW
Rotation speed 40 - 70
revolutions/minute, controlled via a frequency converter
12
carriers on the drum, 80 mm high, 2000 mm long
Hardox ripper
teeth, 48 pieces, 160 mm high
Steel slat conveyor belt (steel
plate conveyor)
6? conveyor belt chain, breaking load 24,000
lbs
Hopper volume approx. 10,000 x 2,000 x 2,500 mm = 50 m³
Transport dimensions 11,500 x 2,600 x 3,075 mm (l x w x
h)
Remark:
The feed hopper with dosing drum (drumfeeder)
is used, built in 2014 and was overhauled in 2021. After the overhaul
and assembly, the conveyor belt has only been in operation for approx.
2 hours in set-up mode.
Scope of delivery:
1 piece used
bale feeding conveyor (chain belt conveyor), manufacturer Bollegraaf,
type HBT 1400/1200 12500 - 0°, without further documentation
1
piece bale opener and dewiring unit as good as new, manufacturer Cross
Wrap OY, type DW 1400 dewiring unit, year of manufacture 2021, with
operating instructions, CE declaration, drawing, electrical and
hydraulic diagrams
1 piece feed hopper ?steel lamella conveyor?
with dosing drum, manufacturer Bollegraaf, type drum feeder BDF
1200/200011000, with operating instructions and
drawing
Comments:
Inspections are possible after
agreement. We will not assume liability for the given technical data
and possible errors.
seller offer No. resale
Cross_Wrap_bale_opener_line_DW1400
|